i would try an orignal image only i get lost in the setup not sure of everything yet.....
niall_b73
Posts by niall_b73
-
-
switched on and off now a few times on both images and still stuck on starting
niall_b73
-
ok and now i have just flashed the latest vti backup image and the same thing again.... flashed all ok but stuck on starting
any ideas please
niall_b73
-
ok so i am in next door. have downloaded the vix 3.0 backup image from here.
put the memory stick in flashed the box all went well, removed the stick and done restart on box now the box is stuck on starting and on the display is saying starting but nothing else is happening !!
the kernel is the latest one...
any ideas ??
going to try a different image now and see if that worksniall_b73
-
ok so i am in the neighbor's and his kernel is upto date, so i am just going to download other backup images and try from there.....
will keep you postedniall_b73
-
brilliant stuff & thanks for your patience and help ;)
niall_b73
-
ok, so i wont know what i will be able to see until i get to the neighbors box in a while.
so how do i update the kernel to 3.1.1, is there a link to a page on here where i can download it or with instructions on how to do so ?thanks,
niall_b73 -
so is this what i need to do now to update the kernel ??
vvvvvvvvvvvvvvvvvvvvvvvvvvvvFOR NEW 3.1.1 KERNEL
First of all make a backup copy of the current drivers, copy all the files in
/lib/modules/3.1.1/extraWhen new drivers comes out, take tar.gz drivers file and unzip all files in
/lib/modules/3.1.1/extra
and replace old drivers.
Than reboot your decoder, that's all.If image reboots correctly new drivers are compatible with your image, if image doesn't start it means that the drivers are not compatible and you have to wait for an image upgrade.
In this case to go back to old drivers, just connect with ftp and copy the drivers you backup before to:
/lib/modules/3.1.1/extra20110817
- Change key code of audio button(uno)
- Change remote control response code(remote control of uno works only in uno)
- Fix occasional not moving FAN problem(uno)
- remove udev-staticAttached Files Attached Files
File Type: gz vuplus-dvb-modules-vuultimo-2.6.18-7.3-4.4.3-20110817.tar.gz (2.13 MB, 13 views)
File Type: gz vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110817.tar.gz (2.13 MB, 27 views)
File Type: gz vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110817.tar.gz (2.01 MB, 38 views)
File Type: gz vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110817.tar.gz (2.07 MB, 29 views)many thanks,
niall_b73 -
is there such a thing as a vu duo clone ?? and if so is it hard to differentiate between the two or would this have any bearing on it at all
(just a thought)niall_b73
-
the box was new (and the user never requested anything) taken from the box as i witnessed and seen it installed, tho.... how long the seller/installer had it in his possession or where it came from is another question ??
the tspaniel was already on it when it was plugged in and switched on !!niall_b73
-
"as the box was already on 2.3 its likely that you need to update the bootloader first to allow it to work with kernel 3.1.1 based images."
so how do i differentiate between kernel images and or is it just a matter of downloading a certain kernel image (the lastest(3.1.1 based images)) from here and installing it as well as the new backup image ?
niall_b73
-
as the box was already on 2.3 its likely that you need to update the bootloader first to allow it to work with kernel 3.1.1 based images.
hmmm.... see now there's where you start to get all technical on me, is that easy to do as i am myself only learning as i go along ??
niall_b73 -
ViX 2.3 is no longer supported so an online update will not work buddy, a full re flash of image version 3.0 is needed..
If you need any help with that let us know..
yeah i did a full reflash from a backup image but it would not load: http://linuxsat-support.com/vu…-duo-backup-musogeek.html
i did all the norm for the reflash but maybe i will try again in the morning.
also there are no options in his current vix image to download skins, plugins ect....
niall_b73 -
Hi all my neighbour just purchased new VU duo box with vix 2.3 preinstalled it also had TSPANIEL and a few other plugins
I tried to do update box froze switched off/on and then TSPANIEL was gone with other plugins
Also it wont let me change skins and when I go into plugins browser it wont let me download additional plugins
When I try to FTP plugins to the box - box constantly crashes!!!
Any help and assistance GREATLY appreciatedniall_b73
-
WOW... now while i am eternally grateful for your help i have to remind you that i am a complete novice at this and learning (albeit very slowly) as i go along.
the link you posted do i install them all or only 1 of them or whatever i think i may need ?? :baffle:many thanks,
niall_b73 -
ok so now i am looking for the "CCcam.cfg" file within the ect folder but cannot find it, any help please ?? or will the file be under a different name because of the new image ??
niall_b73
-
ok got it sorted now thanks
niall_b73
-
hi all, i have just got brave and flashed my vu solo from open pli to blackhole 1.7.9.
i am trying to use the dreambox control center but it is not connecting and i have tried all the ip's that i can !!
the ddc should still work on this image should'nt it ??niall_b73
-
Port and NAT parameters
List of NAT rules
Application Protocol Source port start Source port end Destination IP Destination port start Destination port end Delete Change
> Add
not sure if the above is where i should be in the router but if so what settings should i do for port forwarding ?niall_b73
-
anyone ?
niall_b73