Posts by ihordi
-
-
jel otvara sa slobodnim linijama treba li nesto da se promeni oscamu.Hvala
Ne otvara na free linijama, Kineskim ni Arapskim, ipak mora biti malo bolja linija, i naravno davaoc mora imati lokal karticu kod sebe na serveru.
Nema nikakvih posebnih podešavanje u oscamu, samo davaoc mora podesiti kod sebe i dodati sidove od ta 4 kanala.
imam kartu koja je radila u oscamu , dali treba sta posebno podesavat kao za sky icam ili radi sa kanalima iz normalne liste ?
-
Any new news, can sly be fixed so it doesn't cut?
yes , buy good Line
-
guys , is not problem in oscam
its problem with suorce , now i got new line and working without breaks ,normal
if you have this problem just change source and buy new line
many have fake lines from cache not reall source , exchange between and then not work well
JUST CHANGE SOURCE and all bee fine !!!
-
this is a solution
put this in reader.conf
[reader]
label = LOCAL@098D
protocol = newcamd
device =
key = 0102030405060708091011121314
user =
password =
inactivitytimeout = -1
disableserverfilter = 1
connectoninit = 1
cacheex_drop_csp = 1
cacheex_block_fakecws = 1
caid = 098D
ecmwhitelist = A3,A0,A7,B7
ecmheaderwhitelist = 80709D0000011F,81709D0000011F,8070A000000122,8170A000000122,8070A400A001,8170A400A001,8070B400B00122,8170B400B00122
group = 1
lb_weight = 85
cccreshare = 1
audisabled = 1
-
i got informatons from source
" Local card k1 problem askey update "
will bee fix soon !!!
-
Local card k1 problem askey update
guys working on this and will fix very soon !!!
-
i think is global problem , can someone confirm is work or start problems ???
is it maybe issuie on mine TVH , but this starts from last 3 days , just happand
tomorow i will try on box
maybe we need new patch to update TVH ?
-
from last 3 days i have strange problem with TVH ,
my streams lose connection , or something drop connection
stream start working but in 10 sec just stop , and then agen start
did any have maybe same issuie , and how to fix ?
thanks
-
i make it work finaly , tvh 4.3 icam
thanks for good job all
-
am try compile my own but without success!!!
on the end i got this error
CC src/docs.o
CC build.o
CC timestamp.o
CC tvheadend
/usr/bin/ld: /root/tvheadend/build.linux/src/descrambler/tvhcsa.o: in function `tvhcsa_set_key_even':
/root/tvheadend/src/descrambler/tvhcsa.c:228: undefined reference to `dvbcsa_bs_key_set_ecm'
/usr/bin/ld: /root/tvheadend/build.linux/src/descrambler/tvhcsa.o: in function `tvhcsa_set_key_odd':
/root/tvheadend/src/descrambler/tvhcsa.c:250: undefined reference to `dvbcsa_bs_key_set_ecm'
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:713: /root/tvheadend/build.linux/tvheadend] Error 1
make[1]: Leaving directory '/root/tvheadend'
make: *** [Makefile:110: ffmpeg_all] Error 2
root@stalker:~/tvheadend# ^C
-
is anyone willing to install it for me, I have everything I need but I don't have this much knowledge.
so I would ask a good soul to help me -
tested vu solo 2 full working
-
oscam with icam patch v3 and v4
v4 patch
- added Support for V13 (09C4) & V14 (098C) Cards
thanks DarkStarXxX who create the v4 patch
V4 virus detect !!!!!
-
oscam with icam patch v3 and v4
v4 patch
- added Support for V13 (09C4) & V14 (098C) Cards
thanks DarkStarXxX who create the v4 patch
can someone add this oscam for misel ?
-
am tray yesterday on vu+ solo2 with openpli 7.3 and working .
i have ttv. nds card with keys and now traying to make is work with this oscam but still nothing , icam not want use stream relay with local card in box
must try other options , will check and say
-
here is a icam patch and ipk instalation for boxes
-
hello for all fans of AMIKO 8300HD boxes
here a have new settings for this box
satelits ;
astra 19e
hotbird 13e
eutelsat w2 16e
thor 08w
astra 28e
hellsat 39e28 favorits / same like in dreambox 800hd
for info send pm.
-
now am told you how openbox work with mgcamd line .
after many hours testing , changing software and lines i got this .
all procedure for inputing N line in mgcamd its corect .
But Line must be SINGLE LINE FOR ONE PROVIDER
NOT WORK WITH MGCAMD MULTILINE FOR ALL------------------- ONLY WITH N LINE SINGLE FOR ONE PROVIDER
EVERY PROVIDER MUST HAVE YOURS SINGLE LINE AND ALL WORK OK
POLARIS WORK ON 39E
thats all from me
:thumbsup:
-
Here is tutorial how to fix broken flashed smargo reader
Make simple test:
1. insert smargo to USB - green LED should light but system doesn't recognise device.
2. insert some smart card revrserd to the slot to active card detect only - green led should start blink.
3 inster card properly - green led should be darkIf all points pass it means u have some chance to repair smargo.
To repair it u must open the case to have access to the electronic board.
Put the board USB plug up.
At right side u should have small 3 pin transistor and more at rite side 3 holes placed vertically.
We are interested in this small transitor.
It has 3 legs/pins up and 1 down.
We are interested in it's right up leg/pin (base or gate).
Solder small wire to this leg/pin and connect second side to GND.
I've connected it small capacitor located below r-pack (right side of the capacitor) but u can connect it anywhere u find GND
After that u can connect smargo to the PC and it should be normally detectable.Run ./srp_update_x86 -b to activate bootloader mode.
Remove and reinsert smargo.
Run ./srp_update_x86 -f to flash reader again.
If u see this message:
start flashing
################################################## ######## done
Please remove and reinsert SmartReader+wait about 2-3 minutes and then disconnect your smargo reader.
After this process u can remove the wire and smargo should be alive again