Posts by piterfree

hi,

now I explain a trick that is used to install soft with a different kernel,

if you have a different kernel and installing a soft it does not start and this is the problem old kernel or recent kernel...there are 2 models from what I understood...so to be able to make it work correctly I installed the DremElite soft I start it then turn it off and on again...and put it back in boot with the procedure keeping the finger on the red button...then I send via web the soft that did not work for me and by magic the first soft that did not work is now perfect.

Quote from haldborg

internet connection stops working in Egami 10.6 R9 after a while

has anyone else experienced the same problem??

will be fixed in the next update????B)

using DM920

Display More

hi,

solve by putting fixed ID I always change it I never leave the default one

920 + VuSolo 4k

I only found the wetta plugin that seems obsolete or an error in the execution that when I restart the box it no longer finds the place but returns to DE of defoll... I inserted the linuxsat balls and rewrote with the one from the panel and now it's perfect... I did 4...5 restarts and it works perfectly.

I put the vHannibal setting plugin inside
it allows you to install (motor) all the sats,
you just have to decide which one to add in your sat software.

BH-VuZero-release-5.4.003-20250426_Piterfree

Lnb 2 13+19 vhannibal

IMG_20250426_030908~2.jpg

IMG_20250426_030659~2.jpg

IMG_20250426_030718~2.jpg

IMG_20250426_030740~2.jpg

IMG_20250426_030843~2.jpg

IMG_20250426_030732~2.jpg

today I made it new on the 900 that was given to me, it doesn't go over 50' C.

new heatsink from an old 486...now the parts are good again.

IMG_20250425_175355~2.jpg

IMG_20250425_174600~3.jpg

IMG_20250425_174634.jpg

IMG_20250425_174626.jpg

IMG_20250425_174617~2.jpg

IMG_20250425_174652~2.jpg

IMG_20250425_201255~2.jpg

maybe the problem is that it doesn't control the flashes that a USB makes... the USB must have a LED and each flash it makes means that it takes the file and does it 3 times and at the 3rd time the time is much longer because it learns the complete soft, the last file, the largest, but if you extract the USB first, at the end of the soft the LED on the decoder's front panel must flash brighter and faster... so the decoder is ready.

tested now with DM 900 which has only Ci+Plus support and works perfectly with OpenPli.

They are the first Ci+Plus parallel with the Ci SD and they struggle to work.

IMG_20250425_122553~2.jpg

IMG_20250425_122607~2.jpg

IMG_20250425_122409.jpg

IMG_20250425_122501.jpgIMG_20250425_122450.jpg

IMG_20250425_122523.jpg

IMG_20250425_122431.jpg

hi,

tried to do a custom search on the same frequency...??

then once you are on the channel enter the cam menu and set the Caid 183E

I have the same Cam and it works.

on my 920 it constantly fizzes on all channels and also on Rai 4k

are you testing with a USB that has an internal LED or a normal USB...if the USB has an LED the USB should flash when it is read by the decoder...and if it doesn't flash it means that the decoder's USB is burned and needs to be replaced...!!

openpli-6.1-release-vuzero-20180106_usb

Vu+ Zero RS232 Connection

IMG_20250423_170836~2.jpg

IMG_20250423_170852~2.jpg

IMG_20250423_170904~2.jpg

Backup BH.11.8_agg.via.web.22.04.2025-piterfree

Lnb 4_13e+19e+9e+5w..NGsetting motor

skin_MadMax

CI+Plus Cam Black with Black Card ok

CCcam2.3.9

mgcamd_1.46

ncam 15.3

OScam-11878-802

oscam_11494

Wicardd19

FullBackup

DreamExplorer

IPTVPlayer

JediMakerXtream

LinuxsatPanel

OAWeather

Script-Start-Plugin..emm

XStreamity

Quote from Batroc

Quote from piterfree

hi,

it's an old decoder and maybe you don't remember how to do the flesch anymore,

inside the zip that you download in the vuzero folder there are some files one has the name noforce and you have to rename it to force...and you'll see that it will make your backup.

... and I don't want him to insert the zip file! (you have to extract and insert the vuplus folder on the pen drive)

Display More

Ok

IMG_20250422_230105~3.jpg

hi,

it's an old decoder and maybe you don't remember how to do the flesch anymore,

inside the zip that you download in the vuzero folder there are some files one has the name noforce and you have to rename it to force...and you'll see that it will make your backup.

there is only one problem...I thought that it could also be used with the addition of satellite or terrestrial channels like for Edison, but I note that it is only for use via the web, very sterile.

H9.2H SE

ok, even if it is solid it can be done with a PC better, it often happens that certain files are not recognized and block the formatting system and on decoders many cannot format so I recommend you do it with a PC,

I had a HDD that I used on DM 800 from 500 gb that on the DM 929 could not format it, I did it with a PC, deleted the partition and put it back in the 920 with OpenPli, tried to format it and it gave the same error problem... I reformatted it with a PC in fat 32 and put it on the DM 920 and I only mounted it with the MountManger plugin as HDD and it is perfect now it is full of films... I saved it and renamed it as Usb_1 and I have another 500gb SSD HDD underneath.

Quote from shr776

Quote from urie

Quote from shr776

Quote from hitreek

no its error same image some time work and if error then not work on any image its problem

i have this error
can help us

Do you have usb or hard drive mounted.

i use SSD card
i mount it and i have some video on it and cannot format it
i want use ssd card with my archive

the ssd is made with a PC with linux 2 partitions one formatted in fat 32 and the other always fat 32 the remainder,

I did it to a friend years ago but I didn't know what he needed it for...he only told me it was for a decoder,

you can do it directly from a PC but you will make the entire ssd in fat 32 then rename the ssd usb so the decoder recognizes it instantly without having to format it...try.

Screenshot_2025-04-16-15-34-33-578_com.android.chrome~2.jpg

only one German language channel 3+ HD

read post number 1

hi,

if you install multiboot and then the soft in use does not allow you in plugins or in state management...there is no recovery option you cannot return to another soft...better to use as said install barry allen.