Posts by piterfree

Hi, it works if you have a USB or HDD connected to the decoder, it does it automatically, if you don't have them you can't preview the images, it's in the two drives that saves the previews (movie photos).

Pure2___29.12.2023...test...

hi, delete that one immediately, it has various problems, too many crashes... I installed the language and after a few plugins and restarts it loses the language, it returns to English and you can no longer change it... the Ci+plus only works if you restart on the channel desired and if you zap there is no more viewing on any channel... and it has to be restarted... never found such an incorrect image.

tomorrow text 01.08.2024

hi,

1* change setting

2* manual scan on

11919-V-29900-2/3_4/5/6

11432-V-29900-3/4_La7

3* update satellites.xml.

Quote from samur

Try this one :(https://www.linuxsat-support.c…openssl-1-0-2-libusb-zip/)

;

no it doesn't activate or you don't see it

ciao samur....

I have a problem and I've been testing the Jahpar Dm 920 software all afternoon and I haven't managed to install one of your excellent Oscams,

I'll give you the info of what's inside that is already installed in its software, and if you could tell me where I'm wrong,

IMG_20240105_165745.jpg

tested all 102 and 111 and 3.x.x they don't activate I can't understand why...??

IMG_20240104_165006.jpgIMG_20240104_164935.jpghi, I also have that decoder but since it also has the SCARD I use it to do tests because like other HDMIs it doesn't work... which is why many people use to connect the decoders with the TV on and with the decoder on they disconnect and connect the cable so the the spark that it causes burns the video in the processor, but this works even if you can't see it well, mine is a clone and you have to write a pac for it to make the Original softs work which causes the decoder to blink, however this is the one in the photo,

if the LAN always stays on it should be thrown away, it's the processor that does everything, it manages both the video and the LAN.

certainly they should be emm... different in type, I don't think but in date,

if Mezzo works with an emm that receives only once and after 1 hour there is no need to receive it again... only ECM arrives,

or that it is the only ECMs that make it work....??

I am thinking of a monthly EMM for these channels which will be from the 183D

tested on MEZZO and VH1.

++++++++++++++++++++++++++++++++++++++++++++++

di certo dovrebbero esser emm...diverse per canele non penso ma per data,

se Mezzo funziona con una emm che prende una sola volta e dopo 1 ora non ce' bisogno che la riceva di nuovo...arrivano solo ECM,

o che sono le ECM uniche a farlo funzionare....??

penso ad una EMM mensile per questi canali che saranno della 183D

testato su MEZZO e VH1.

EMM 0

ECM ok

Emm nothing but ECMs all arrive...and with the ECMs the TVSat is updated only on these 2 channels if I understand correctly they are updating the Golds with the EMMs of the SD 183D...is that the problem...?

+++++++++++++++

Emm nulla ma ECM arrivano tutte...e con gli ECM si aggiorna la TvSat solo su questi 2 canali se ho capito bene stanno aggiornando le Oro con gli emm della SD 183D...che sia qua' il problema...?

I was...checking the channels and I stopped on Mezzo...let's see if you notice that the Oscam only works with the Golden TvSat Card...??

+++++++++++

stavo..controllando i canali e mi sono fermato su Mezzo...vediamo se vi accorgete che fa' la Oscam solo con Scheda TvSat Golden...??

Screenshot_20231230-004657~2.png

Screenshot_20231230-004817~2.png

Screenshot_20231230-011222~2.png

I sang too early, the decoder stopped, it no longer responds and with remote DCC it won't let me in anymore..

IMG_20231229_153457~2.jpg

1* left is saving openpli-develop-h3
2* right what I had saved openpli-9.0-release-h3-20231225

there is a difference and it seems to me that the FullBackup plugin works with this openpli-develop-h3 soft

Now I'm going to test this openpli-develop-h3 and see if it has the same problem

BackupSuite....

*** THIS BACKUP IS CREATED WITH THE BACKUPSUITE PLUGIN ***

***** https://github.com/persianpros/BackupSuite-PLi ******

Plugin version = 3010f02

Back-up media = /media/usb

Filesystem Size Used Available Use% Mounted on

/dev/sda1 7.2G 135.6M 7.1G 2% /media/usb

Back-up = 2023.12.29_14:25

Version = openpli 9.0-release

Flashed = 2023.12.25_03:25

Updated = 2023.12.29_14:23

Drivers = zgemma-dvb-modules-h3 - 4.10.12-20180830-r0.0

Enigma2 = 2023-11-17-release-9.0

Working directory = /media/usb/bi

Not Open Vision, OpenPLi or SatDreamGr maybe?

Destination = /media/usb/zgemma/h3

RECEIVER = Zgemma H3

MKUBIFS_ARGS = -m 2048 -e 126976 -c 8192

UBINIZE_ARGS = -m 2048 -p 128KiB

KERNEL dimensione del backup: 6144 KB

ROOTFS dimensione del backup: 114756 KB

=TOTAL dimensione del backup: 120900 KB (= 118 MB)

Si prega di essere pazienti, un backup sarà eseguito e impiegherà circa: 8.03 Minuti

*** FIRST SOME HOUSEKEEPING ***

Remove directory = /media/usb/bi

Recreate directory = /media/usb/bi

Create directory = /tmp/bi/root

UBINIZE.CFG CREATED WITH THE CONTENT:

[ubifs]

mode=ubi

image=/media/usb/bi/root.ubi

vol_id=0

vol_type=dynamic

vol_name=rootfs

vol_flags=autoresize

--------------------------

Creando: Kerneldump

Kernel resides on mtd1

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

all it does is this stops like this and stays forever

USB folder

bi

root.ubi

ubinize.cfg

finished everything and 'this without any result very nice Py3

IMG_20231229_145453.jpg

Quote from abu baniaz

If you want the problem fixed, please provide a log, I will forward it to the PLI forum and somebody will have a look when they get a chance.. What do you mean by "soft"?

OpenPli 9 on the Zetagemma

what's the point of making a soft and not being able to save it for a possible future,

suspended..deleted it from my archive.

I did another test and tried to restore the Zetagemma with the backup made with the backupflashe plugin...and it doesn't work, this is also not good...I confirm that there is no possibility of making a backup after 8 hours of testing.

the new backup works but not with their feeds,
after 4 hours of testing,
I know how to get by, I'm quite expert on almost all decoders
I had to find another backupflashe plugin which is a plugin for the DM 920 develop and works on the Zetagemma H2H which is a soft Mips,

I would like to see if other users on all the forums can make a backup of Pli9 on the Zetagemma.

I realized that OpenPli 9 is another crap job I have to say
I'm hating this latest news

Zetagemma H2H...BackupSuite

What's the point of having feeds if your plugins no longer work?

it's useless to have them

the backup is not possible, it stops at a certain point and goes into catalepsy, the decoder no longer works
the catalepsy remains forever you just have to disconnect the cord to restart it... my Maroni actually broke.

I hope that those who are part of the temple check otherwise it's a bad logo that was put up... from 2024... what's the point if you can't keep this soft one.

HI,

opkg update && opkg list | grep libssl
later to install the library
opkg install <libssl_package_name>
opkg install libssl1.0.2

OSCam-11726

now the new bin works, it needed to download the right dlls
Forgive my post if I had doubts... always thanks for your work.

Quote from samur

Quote from piterfree

today in testing the OpenPli 9 Py 3.3.9 soft

I think OpenPLI 9 still uses OpenSSL-1.1.1 and you can't use oscam with OpenSSL-1.0.2 on it.

Use the right version that match the OpenSSL of your image .

(https://www.linuxsat-support.c…openssl-1-1-1-libusb-zip/)

;

Display More

HI,

I also did the SSL test and it confirmed that I have the 102
and your oscam works for me if I put OSCam-11724-798 (OpenSSL-1.0.2

the OSCam-11726...this doesn't work for me