Posts by herr flick

C: 192.168.1.9 17544 test1 test1
if you try to share between oscam and cccam in home then:
in cccam put in f line
F: test1 test1 0 0 0 ........
and in oscam
reader:C: 192.168.1.9,19566
user: test1
password:test1
as cccam reader in oscam server
if you send line from oscam to cccam (home) then in oscam user put
user:card1
password:card1
caid
. . .
.
.
and in oscam cfg
15500@your cardident:caid
key:01 02 03 04 05 06 07 08 09 10 11 12 13 14

and home share works,no port forwarding needed
that settings are like your in first post

how you connect cable direct to dm ,because that cable is male and you need female

Quote from newtolinux

Those that use smargos in a linux pc setup have probably come across the frustration that after a reboot the smargos no longer correspond to the device positions which you have setup in your relevant cams and your card won't read . A very easy trick is as follows : -

create the following wordpad document with this text :-

SUBSYSTEMS=="usb", ATTRS{idProduct}=="6001", ATTRS{idVendor}=="0403",
SYMLINK+="ttyUSB_%b", KERNEL=="ttyUSB[0123456789]", MODE="0666"

save it as "52_reader"

ftp the file into etc/udev on linux . chmod to 755 then reboot pc and setup your usb on oscam/cccam etc ,thats it !

Then give your pc another reboot and test.

regards

t

Display More

did it works with serial phoenix connected through usb/serial adapter ?because i have similar problem after reboot, simple no recognize card

did you restart router after forwarding? you try to see ports from your pc here http://dream-sat.info/Portcheck/
and port must be ftp you know that .

have ubuntu 12.04 32b oscam+cccam server, and problem is that cccam no work good. I see my client in cccam but no see servers, only local server, between cccam and oscam, oscam works ok.

i don`t know some user just keep clear au - missed. my suggestion is to put au for ***uk on, then you haven`t worry for update.i have i***** card and similar situation like you (pc-box)and i have au on always, but this is no nds card, so i don`t know exactly

if i understand you have pc oscam server and box for yourself (client), then in oscam user (pc) put just au = 1 for card which one need to be updated,but i thing ,you must have also oscam in your box, switch one channel from ***uk and you will see in web browser in readers section how are your card is up dated.

give peers with oscam or mgcamd, in oscam user au=1, and card will be updated. you can see what`s happend in reders section

Need command to see my rs 232 port, because i have added 2 port on pci so i need to find did i need driver for them ,just to see how many ports i have.(ttys) not ttyusb

did you see your server in oscam web browser?

if you have blue gp image you need only find satellite position and channels that gp means gemmini project so you already have image.

and? what`s going wrong?

it means that od70 and older card got only basic cs/sk chanel ? i have information that theolder criptoworks card (0d0f,0d03 ,0d70) will no longer valid, only 0d96 and newer( cw i*****). is that correct?

Quote from Maverick_BK

Pay TV on 0666 ends 30.11.2012.

i don`t think so ,it`s new s.ylink or csl.nk card ex 0d70 0d96 in i***** mode that caid 0d70 an 0d 96 is ends 31 12 2012 if i am understand.

what you don`t understand from this site , paste here i will try to translate.and it`s not serb but cech and sl***k language

Quote from lfc4ever

Try this.

Code

[reader]
device = hisdyndns,port
label   = anything
caid    = 0963 or whatever caid it is
protocol = newcamd
key       = key you were given
ident     = ident for card
group    = different group from other cards/shares
user      = username
password = password
blocknano = all
blockemm-unknown = 1
blockemm-g = 1
cccreshare  = 1
ccckeepalive  = 1
cccmaxhops   = 0
audisabled      = 1

Display More

nothing i deleted this line it`s fake

i said tht`s vps server, and some kind of bullcript encription if that means something.
do you thing that blocker helps?

Quote from sync

The des key is changed for security, it should never be left at the default, you must use whatever des key the server uses or it will not allow your line to connect

i use that key but nothing still same = unknown

Quote from sync

As said you are probably entering the line incorrectly
My 1st point was that some nagra 3 caids may not work properly this way...

cardserver > n line to oscam > client

it`s not nagra card it`s bu.cript works only in mgcamd and oscam
my question why that key, not standard 01 02 03 04....14

Quote from lfc4ever

Assume you are entering the line in oscam.server? if so how are you entering it?

is not my 1st nline

[reader]
label = xxxx
protocol = newcamd
key = 0102030405060708091011121314
device = serverip,66666
account = login1,password1
group = 1
fallback = 1