Posts by glenviewjf

That will keep occuring until you flash the box in the new and install the drivers in the new!.... Until then I cant work miracles and as said previous this method has worked for me!

You can use that

Hi please make an introduction post!

Posting in Capitals is frowned upon also!

Sounds like your missing a registry file..

Google "LIBMYSQL.dll" and download it to your pc..

Restart it and try install the program again

Quote from ferdi

Sorry, but after reflashing you must reconfigure the decoder.
I do not understand how is preserved previously installed driver.

Yes technically you are right it should not make any difference but literally it works!

Try a reflash of the image and download the driver (make sure its the correct driver) via the ItalySatDTT Downloader which is found via the TS Panel..

I'm only guiding you on past experiences!

InfoBarTunerState 0.8

0.8LiveTV Stream AnzeigeBeendete Streams werden wie beendete Filme je nach Einstellung aufgelistetFortschrittsbalken für AufnahmenIcon und Fortschritsbalken können als Feld ausgewählt werden- Eine doppelte Auswahl ist nicht erlaubt und wird beim Beenden geprüftUnbegrenzte Aufnahmen haben keine Dauer, keine Restlaufzeit und keinen FortschrittsbalkenNeue Felder:Tuner Type: DVB-S, DVB-C, ...Stream Client: Name des Cleints. Wenn der Name nicht ermittelt werden kann, wird die IP dargestellt.Geänderte Felder:Begin, End, Duration: Wird auch für Streams berechnetKombinierte Felder:Time Left / Duration: Während der Aufnahme: Verbleibende Zeit, danach: GesamtzeitDestination / Client: Für Aufnahmen: Aufnahmeordner, für Streams: Client RechnerSkin Änderungen:Achtung Skin Update notwendig!Optinal screen paddingOptinal screen spacingwidget name="Type" ist nun ein MultiPixmapwidget name="Progress"Neue PNGs Stream und InfoProgressBar wird innerhalb der Zeile vertikal zentriert.backgroundColor="#ffrrggbb" ff should be fixConfig Änderungen:Horizontal OffsetVertical OffsetText OffsetAdd to extension menuBackground transparencyBugfix: Timer blocking weiter minimiert, liegt an den lokalen timer und iRecordableService Objekt KopienBugFix: Berechnung der Kanalnummer bei langen Kanallisten verursachte Verzögerungen der InfoBar AnzeigeBugFix: getTunerDanke Zombi für das Streaming Icon

Please stick to the one thread and post in the correct section!

Enigma 2 support, where i moved your two threads you made last night!

http://linuxsat-support.com/enigma2-support/8232-backup.html

Thread closed

mg.cfg is found under /var/keys/..

Not being smart or anything but in your other post your looking to delete mgcamd so i'm assuming you've installed another version and have it active?

You can always ftp in one anyways..

Update: 30.10.2011

LNB 1 (Hotbird 13E)
LNB 2 (Astra 4.8E)
LNB 3 (Astra 19.2E)
LNB 4 (Thor-Intelsat 0.8W-1W)
LNB 5 (Amos 4W) (Atlantic Bird 5W)
LNB 6 (LMI 75E)
LNB 7 (Eutelsat 36E)

Run a disk clean up..

And then run the "Disk Defragmenter"

These are usually found under "Accessories -> System Tools"

The Defrag will take a good while if you havent done one lately!

Quote from ferdi

I added ts panel, I downloaded the driver, but it doesn't work.
What do you mean ".. ended up reflashing" ? - You probably wanted to say reboot. Thanks

"Ended up reflashing" = Ended up flashing the same image in the new...

Make sure its activated yes..

Is it Iredeto or Via4.0?

Ya Debians and ubuntus are similar!

The configs will be the same for the card..

Installed this on my tab!

Streams for maybe two seconds and stops then..

Any pointers rocco?

No you can't use it as it is totally different reciever and would brick your Openbox...

File

TSpanel Enigma2 Plugin ~ all plugins to your box

Tspanel has many useful tools like Cams Manager, Addons, Files Explorer, Device Manager, Settings Backup, Settings Loader, Satellites Editor, NetSpeedTest, ScreenGrabber, Plugins Mover, Tools and Information about your Image and Receiver.

master G

Feb 21st 2019

Manual Install it buddy if its not already on your image

I'm pretty sure it's just to do with Service+ and the enhanced Rytec Epg..

So basically like everything its a personal choice!

Download the driver via the ts panel!...Look for it under the sim2 server... I had similar problems before and ended up reflashing!

Quote from jojo36

so just make the cline in notepad or something like that

You can't use the notepad way for the 5000sd as far as i'm aware!

i have only ever put it in manually using the remote!

I have seen other people complaining in the past week about there signal dropping alright, I must check mine later..

I hope its not a reduction in power in transmission :(

Quote

Update on new satellite:

The W3C satellite, built for Eutelsat by Thales Alenia Space has been successfully launched on Friday October 7 by a Long March 3BE rocket from the Xichang Satellite Launch Centre (China).

Scheduled to enter service at 16° East on the night of November 8th - 9th, W3C will replace Eutelsat’s EUROBIRD™ 16, W2M and SESAT 1 satellites.

Through its configuration of 53 Ku and three Ka transponders it will provide capacity for broadcasting and telecom/data services.

High-power footprints of Central Europe and Indian Ocean islands will support digital video broadcasting markets while coverage of Africa stretching from Senegal to South Africa will serve data and telecom markets.

Launch date: 07/10/11
Launch details: Long March
Satellite construction: Thales Alenia Space

Display More

Are you using up to date bouquets lad?

Its a possibilty that PIDs could have changed..

The sim basically determines which flash your reciever can take...

Most popular with dm800hd clones are sim 2.01

You can buy these off most good dreambox shops and probably off anyone with a broken clone if you put a request out!

Not too sure about the front panel of the reciever, it could just totally be confused! lol

Hope you get it sorted mate