Yup some people have the cheek of charging for them!
And some people are foolish enough to pay!!
Posts by glenviewjf
-
-
Little pictures that appear on your info bar, of the channels logo...
Like them:
See the bottom left hand corner..
-
Its just a channel list mate, with favourites and picons!...
Some cheeky so and so's have the neck to sell them like!
Example's of them are here: http://linuxsat-shares.com/eni…flipflop-e1-settings.html
-
Here m8..
1. MENU > INSTALLATION > TP List.
2. Look and make sure you are on the correct satellite. If not use the < and > arrows to flip thru. If you were already on the satellite it should be the one selected already.
3. Press green button to add.
4. Type in the frequency, then arrow down to symbol rate
5. type in the symbol rate, arrow down to polarity. Use < or > arrows to change polarity.
6. Arrow down to save, press OK button
----------------------------------------------
To scan the TP:1. Press blue button on remote for Search
2. Either press ok and it will search, or set the options if you want such as FTA only, TV/Radio and Network search. I just hit the ok button as the defaults are what I want with a manual TP scan. -
http://linuxsat-shares.com/ope…box-s9-hd-usb-update.html
Am i think restart with the CCAM again and follow that tutorial m8..
-
That there is something wrong with it...
Does your openbox recognise your usb??
-
Is it possible your usb stick or ccam.cfg file is corrupt mate?
-
You put the usb in your pc and click format and select fat-32..
Stick to the one thread mate!
-
http://www.4shared.com/account…ZfUVb7/sharing.html?rnd=8
Software available to download from there!..
-
Ok mate is your usb drive in fat:32 format?
Take a look at these tutorials too...
http://linuxsat-shares.com/ope…rmware-openbox-s9-hd.html
-
Improvise mate..
Those are the tutorials you should be looking at!...
Have a read and if your stuck with any terms or just have any questions, don't be afraid to ask!
We'll get you set up ;) :top:
http://linuxsat-shares.com/ope…nbox-s9-set-up-guide.html
http://linuxsat-shares.com/ope…am-cfg-upgrade-start.html
http://linuxsat-shares.com/ope…s-guide-adding-cline.html
-
Sounds like the video output on that it fooked!...
Unless its different with another image but i doubt it!
Maybe someone else might have another option!
-
Am that sounds like the scart out put could be faulty!
Have you tried the other connection, the three circler inputs, yellow for video, red and white for sound?
-
-
Even if it is cracked, Mgcamd isn't too enticing if you know what i mean...
Always said it was too cheap to be true! Good box i'm sure though for hd and all!!
Oh wells!! Hope something happens with it too mate for ye're sake!
-
Nothing about that around either like...
Everything you see, you think oh this may be it, but its only about a client and how they got it working!
Surely someone has it set up if it is possible!
Would be fairly frustrated if I had one myself...
-
Ya it can be done m8..
Did a search only yesterday for a tutorial or even some signs someone had done it but no good!
Never heard of anyone sharing through mgcamd myself though...
-
Yup but only share Mgcamd mate..
Been known all along like...
And its not known how to set it up as such...
-
Been looking for more ways people have fixed this problem m8!
Found this!
"When Dreamup asks you to power on the DM500, then switch on or insert the power lead
You should see box type: DM500
however it may fail to initialise the flash upload or give you the message "alive and speaking to us"Leave for about 1 minute connected using Dreamup then quickly remove power from the DM500 and quickly reconnect the Power.
You may see that DreamUps starts to initiate the flash upload..but wont copy flash to memory.
What I did next seemed really strange but brought these boxes back to life.
Click disconnect in DreamUps ..Remove power from DM500..then click connect.. Reconnect power to DM500. You should see box type again DM500
Intialise again fails.....quickly remove and connect power to the DM500 (i did it about 5 times)
Reboot laptop or PC with Null modem cable connected and DM500 switched off
Start Dreamups again
Power on DM500 when asked to.Hey presto....managed to get an Image back on :-)
This wasnt a "one off" as I have done it to 3x DM500s now (2 clones and an original)
Hope you find this helpful"
Worth a shot!...
-
http://linuxsat-shares.com/lin…-ubuntu-cccam-server.html
You following that guide mate ya?
Sounds promising that you got internet connection ;)...
