Posts by novice999

Hi

I picked up a second hand Amiko Alien 2+ Triple Tuner that I want to use in one of the bedrooms taking a line from my DM800HD which uses Oscam+CCCam (0963 Card). I have a couple of Dreamboxes in other rooms all of which work fine but am a total novice with this Amiko Alien 2+. It currently works perfectly with FTA channels. I have located the Oscam Config files in the keys folder using DCC but they quite frankly seem to a bit of a mess. I would very much appreciate if someone could point me in the direction of a set of Oscam Configs for this box which would allow me to simply enter a converted cline to get the box up and running.
The box appears to be flashed with PKT SVN-2874 based on GIT-5580 (Father Pio Version 3.2.7 - 2013)

Many thanks

Novice999

- - - Updated - - -

Hi, apologies for my own stupidity. I even managed to confuse myself! I was for some reason coming at this as if I was attempting to configure oscam for a server as opposed to a client. A little time out and a quick browse through some of Master G's configs posted here and I was sorted.

Many thanks
Novice999

Quote from dabecka

You take the serial number from the receiver menu (not from one of the labels), remove the first and the last digit, convert that number to hex and add it as "boxkey = $number". It should be 8 digits, if it are less, you need to fill up with zeroes in the beginning to get a 8 digit string.

Many thanks debecka, I already had the boxkey written down from a few years back so entered it as described and immediately my entitlements were updated and all channels are now clearing. I still don't remember having the boxkey entered in my previous setup which worked for the past 2 years but that could be a sign that I need to start worrying about my brain not getting the correct updates ;)

Thanks again

Hi Master G
I seem to have a similar problem and would very much appreciate your advice. I have a dm800 clone which I have used as a server for the past 2 years, using oscam & CCCam. The box crashed about a month ago and I reflashed it with the same image:- Dream Elite Black Hole V1.0: Enigma Phoenix 2010-06-01 :Image Sat4fun 2013-06-02

I installed oscam #6059+CCcam213-Sly_Uk-E2-BH from the addons and copied my configs from a notepad version I had saved. Everything worked fine for the past few weeks until this Monday when I was missing a few channels. Obviously I checked the frequencies for change but it was not that. I then noticed my entitlements were down to 14 (I'm sure there were more) and these 14 are due to expire at the end of the month.

I am not aware I have done anything different from my previous setup so would very much appreciate your input

These are my configs

Oscam Conf

[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 90
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 15000
httpuser = XXX
httppwd = XXXX
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httpdyndns = XXX.XXX.com

[newcamd]
key = 0102030405060708091011121314
port = 15500@0963:000000
allowed = 127.0.0.1,0.0.0.0-255.255.255.255
httpdyndns = XXX.XXX.com
keepalive = 1

Oscam.Server

[reader]
label = skyuk
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101

Oscan.user

[account]
user = XXX
pwd = XXXX
group = 1
uniq = 2
monlevel = 1
au = skyuk
caid = 0963
ident = 0963:000000
keepalive = 1

Finally, I note in your response to Debecka above about entering the box key. I know what the box key is as I had previously used when I had standalone CCcam setup but I cannot remember using it in the oscam+cccam setup prior to the recent crash which worked for approx. 2 years. If I do need to enter it perhaps you could advise what the entry format of the key is in oscam.server.

Many thanks in advance for your assistance.

Novice999

Hi again

All seems to be ok now, these channels are clearing this morning. Not sure what the problem was, probably an issue with the Dreambox.....maybe time for me to move to a linux server :69:

Hi Guys
I am running Oscam V6408/Cccam 2.1.3 on a DM800HD with 0969 internal card and all has been working well until today. For some reason when the frequencies changed on B*Sport 1 and E$PN changed today and I retuned them they no longer clear. I am in ROI and have subscribed to these channels via S€tanta.

Just wondering if it is a cam issue or something else?

Many thanks

Novice999

Its definitely a nice image. Couple of issues however, firstly when I tried to download and install the oscam+CCcam213 or CCcam 2.1.3 from the TSpanel it gives me the ......no valid infrastructure, ignoring! Not sure if this is a problem with the softcam file or the image.

I performed a software update within setup menu which completed successfully however when it rebooted some real problems started to happen. Firstly the TSpanel background pins onto the screen and wont go away until full reboot and then the box keeps freezing and then rebooting. I am absolutely certain that this is down to the software update I performed as when I reflashed the image it was fine and then when I did the update again the same problems happened.

Its a great image but I would definitely recommend that the current software update be avoided at all costs.

Thanks again guys for the help

Hi Guys
I have a Clone DM800HD SIM 201 SSL 84a with Dreamboxuk image installed. The image has become somewhat problematic of late and I wish to replace it. I would very much appreciate if someone could recommend a reliable replacement image. It would also be helpful if any recommended image provided easy access and download of oscam + cccam.

Thanks in advance for your help
Novice999