thanks for image, it is very clean and resource (cpu) friendly, compared to other images
my findings, running from BarryAllen does not mount sdcard, to get back, mount must be done manually mount /dev/mmcblk1p1 /media/ba/, foreca plugin goes to green restart, different skin - working in vanilla Openpli, is corrupted and throwing errors, sometimes green restart..
yes, from the log it looks like symptoms are there, emmc is in read only mode,
it happened to me after warranty period , my bad, so my decision was to buy another dm920 with the SD card and Barry Allen plugin and run whole system from SD card plus additional cooling
probably your flash mmc memory is damaged (read only mode), warranty repair will be needed ...
boot log from usb service port may looks like:
CS0: SFDP SPI, 32MB, 64kB blocks, 64kB erase block, 256B pages
EMMC1: transfer complete intr error, intr=0x208000
Command 8 failed
EMMC1: device failed to enter transfer mode
CS1: NAND: unrecognized ID: 0xffff 0xffffffff
RTS0: 0x1101004, 256 clients, ok
...
set pwm to 200/255
Normal bootup
Default boot device not found!
Booting failed. Running recovery
Loader:zimg Filesys:raw Dev:flash0.recovery File: Options:(null)
