Posts by sunlight786

i did tried to install DDclient and noip, noip2 ,i have remove them by terminal and i have even remove all the files related manully by terminal then reboot server but when next time i tried to install from fresh it itself find my settings? like server stored some where last set up

what is the best way to clean all the set up first?

ALSO

can it be run with out any boot up?

it should run every 1 day with out main restart or reboot
and should also if main internet conection change and pc or box reboot
also when we just restart oscam or cccam its own

how can i make this possible?
in that case it will be always uptodate

i have foloowed that guide and it download th noip-2.1.9-1/ instead noip-2.1.7/
before follow the guide i did update a wrong IP at no ip.com so i can see after following the guid will it update the right IP?

unfortunatly after all the instruction when i start the noip2, it showing OK but ip d,nt update.
this is the way I am stuck.

to follow th guide is not hard but for some reason it d,nt work with no ip.com !!

I have tried all day to get help via google but so far did not achieve any thing.

it seems machine need to be hard rebooting to get dyndns working !
Any way can I avoide to be reboot and it update?

Hi,

Normally when i was using free dyndns from dyndns.com it was very well update in my router and ubuntu pc with DDclient software.but I have move to no-ip.com and my router which got DD-WRT software is struggling to update the dyndns every 10 days.at the minut i update dyndns manually via no ip .com and it will be ok till next month.

this what i see on router page
Tue Aug 14 02:30:31 2012: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater.
Tue Aug 14 02:30:31 2012: INADYN: IP read from cache file is 'xx.xx.xx.xx'. No update required.
Tue Aug 14 10:58:58 2012: W: DYNDNS: Error 'RC_IP_CONNECT_FAILED' (0x13) when talking to IP server
Tue Aug 14 10:58:58 2012: W:'RC_IP_CONNECT_FAILED' (0x13) updating the IPs. (it 50)
Tue Aug 14 11:33:11 2012: W: DYNDNS: Error 'RC_IP_CONNECT_FAILED' (0x13) when talking to IP server
Tue Aug 14 11:33:11 2012: W:'RC_IP_CONNECT_FAILED' (0x13) updating the IPs. (it 53)

Can not see here what I am doing wrong?

then I try little further to install noip2 to mu ubuntu during installation it ask me my log-in (user name or email ) and password then interval with my only 1 dyndns address.

i tried to make interval 1 days to 30 days but nothing happens.

here this the way i am checking if it work or not

i Go in to no-ip.com then select wrong any random ip and update manually and i can see it stat wrong address. then i force on my ubuntu to use noip2 to run and if this work correctly i can see same time on no-ip.com that my ip changed but i don't change.

Please any advise as it expire ever month and d,nt get update while via server.

I think it should be as in my opinion

your remote reader

[reader]
label = remote cacheex reader
description =
protocol = cccam # you can use camd35 also which is more prefer
device = dyndns,port
user = remote-user
password = remote-pass
cacheex = 3
cacheex_maxhop = 4
group = 40# any unique no you like

user account for this remote reader should be as

[account]
user = remote-user
pwd = remote-pass
description =
group = 1 ,40 # ( 1 is you local reader but you add all if you want to send every single cach) and ( 40 is you remote cacheex reader)
cacheex = 3
cacheex_maxhop = 4
cccmaxhops = -1 # adding this line will make sure that your friend cant be able to see you local card but only cach of you local card because cacheex=3 for cach only

both you&firend need same set up though

and when you want to exchange just cach only for next time just do all same but add all cach groups only in oscam.user for remote reader.

also add this into oscam.config under global
clienttimeout = 1600
cachedelay = 15
max_cache_time = 7
max_cache_count = 7500

Please some one make me clear if i am totaly wrong.
many thanks

Hi,
I like to know
what exact benifit of this script?
do it need to be in server?
can it be use in ubuntu also?
what is the reason to be get high ecm ?

thanks

chech your oscam.config and see what port is set for you webinfo.

hi,
one of my friend want to try cachex and he ask to me to enable cachex=2 in my server under his remote line and also in my oscam user under his acount i gave him.he said that he done same thing on his server.

so i like to know which option is good to try so it can be fair among our servers(d,nt like heavy users ), i realy d,nt want to hammerd his server or he hammerd my server. so plz advise.

i my self confused which option to choose? as i did enable cachex=1 in the past and one of my peer complain to me as it was hammering toooo much to his card so since then i disable this option.

if you got 2 cards then better use group=1 and group=2 also saparate them by oscam.services if the entitlements are diffrents. I been told that remote reader work more better while saparated by service compare to local reader though.

i got issue here

i got sly uk latest picons in a folder and inside there are too many files.
example .i got file called
IC_1_0_1_1A7C_7DD_2_11A0000_0_0_0

now as you said we need to rename it as Caid_ChannelId
how can i do all of them? its too much to do do 1 but 1
to get extansion pn from png is not a issue.
please guide me

yes i agree try to use latest version it might solve the issue as in the past time to time i had this issue also but not at the minut,so try latest with white list.

au = 1

that can be

au = lable name of your reader and in your case it will be ***uk

update!
since 06/06/2012 I am using OSCAM 1.20-unstable_svn build #6356 and so far things are settel with out any issue.the only thing i am not sure off is,

on the status page of the webinfo if i click on my local or some time remote reader uder LB Value / Reader
I found some timeout messages against those chanel which i have,
example!
09*3:000000:10CE:0000 *** Movies Action & Adventure 0062 timeout 5000ms 5000ms 24 07.06.12 11:16:55

please advise me on that.thanks

i have # box id,servies in my local reader and leave services for remote reader to recieve only what i need. restart oscam and i will report back what every happend next.
thanks for all the use full info you guys provide today.

thanks,
the only thing i d,nt want is use my peers line for those chanels which i have my own and they are their just as back up i mean for rainy day.

i will #services from my local group 1 reader .
but can i leave services on remote readers,becuse i only want their chanel what exact they offer in their share.
so far i tried services = what they have and also
services=! what they d,nt

it is very pain full matter to me as when i recieve them chanel from peers with a bit high ecm they glitch and freez.ofcourse come out from my local very very low ecm and more smooth.

i am continiuing seeking for permanent solution for this oscam behavior as when i use peer line like that ,he might think i am hammering him for nothing.
normaly i use their back up when i have issue my own though.

what else we can do for the local service which block because it think its 'bad sid' ?

update!
i have seen on webinfo that
users are using a periticuler chanel from my one peer instead from my local , showing on webinfo as by remote peer3 (cache) (389ms)
remember i have that chanel in my local so why user are using from peers with high ecm 389 instead they can use from my own local with low ecm.

what i done is

i have re direct my own box with selecting only my local group and try to watch that chanel which is clearly decoding.
i refresh my webinfo page and now users are using my local far that chanel instead peer.this time i have not restart oscam

can you please advise me for that .

many thanks

i am not using cachex function and my version is OSCAM 1.20-unstable_svn build #6356(i have tried so many new also)

here si my config files

[global]
Nice = -1
#LogFile = stdout
logfile = /var/log/oscam.log
MaxLogSize = 102400
Sleep = 0
FallbackTimeout = 2
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 1
WaitForCards = 1
PreferLocalCards = 1
saveinithistory =1
readerautoloadbalance=1
lb_mode = 1
lb_min_ecmcount = 3
dropdups=1

[monitor]
port = 878
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 1

[cccam]
port = 13000
reshare = 1
version = 2.1.2
stealth = 1

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httphideidleclients = 1
httprefresh = 60
#httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpallowed = 127.0.0.1,1.0.0.1-254.254.254.254
httphideidleclients = 1

[newcamd]
port = 13001@0963:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1

####server file###

[reader]
label = my local
protocol = smartreader
device = 001:006
services = !servise i d,nt have
caid = 0963
boxid = xxxxxxxx
detect = cd
mhz = 480
cardmhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101

[reader]
label = remote-peer1
protocol = cccam
device = dyndns,12000
user = user1
password = psw1
group = 2
cccversion = 2.1.3
ccckeepalive = 1
audisabled = 1
ccmaxhops = 0
services = services they have in their local

[reader]
label = remote-peer2
protocol = cccam
device = dyndnsv,14000
user = user2
password = pass2
group = 3
cccversion = 2.1.4
ccckeepalive = 1
audisabled = 1
ccmaxhops = 0
services = services they have in their local

[reader]
label = remote-perr3
protocol = cccam
device = dyndns,12000
user = usesdr1
password = pswert1
group = 4
cccversion = 2.1.3
ccckeepalive = 1
audisabled = 1
ccmaxhops = 0
services = services they have in their local

[reader]
label = remote-peer4
protocol = cccam
device = dyndnsv,14000
user = userff2
password = passdd2
group = 5
cccversion = 2.1.2
ccckeepalive = 1
audisabled = 1
ccmaxhops = 0
services = services they have in their local

#######user file#########

[account]
user = aaa1
pwd = bbb2
group = 1,2,3,4,5
monlevel = 0
caid = 0963
ident = 0963:000000
cccreshare = 0
uniq = 3

[account]
user = aaa2
pwd = bbbb3
group = 1,2,3,4,5
monlevel = 0
caid = 0963
ident = 0963:000000
cccreshare = 0
uniq = 3

[account]
user = aaa3
pwd = bbbb43
group = 1,2,3,4,5
monlevel = 0
caid = 0963
ident = 0963:000000
cccreshare = 0
uniq = 3

thanks a lot this explanation clear a lot of my confusion about services set up.i am going to alter my some set up.
one more issue i have notice is that i got sports package and my 3 peers also got sports packag in their local,every 24 hrs what i found that on my web info i use his sports package and not from my local which i d,nt like,
my local been use for other packages but not sport package
i have to restart oscam here to resolve this issue,which is also not normal.
after restart i am stop using his packages and all request go to my card and it work for next 24hrs.i am fasing this issue past many weeks.

hi,
i was not able to start oscam manually for some reason and i attept to install this
http://linuxsat-support.com/li…1-2012-silverfox0786.html

its all ON now but i will come back another time to attept again to install and then see whats going on a spare pc very soon.
thanks a lot

HI,
I got some question to ask and thanks in advance for the answers

i want to add services(what actuall chanel on card) in my local and remote reader in my oscam.server

example

my local card got sport,movie
remote reader -1 got HD sports,HD movie ( but he has some other packages on hope2 also which I d,not want as hop2 ecm too high )
remote reader-2 got mutv,espn (but he has some other packages on hope2 also which I d,not want as its ecm too high)
remote reader-3 got asian packages ( but he has some other packages on hope2 also which I d,not want as its ecm too high )

now what i need is i only request to watch chanel from them readers Chanel on their hop1 NOT hop2

my problem is when i watch certain Chanel from remote raeder some time its not available on his local and take from his hop2 it brings too high ecm to me and that Chanel freeze and glitch.

i hop you guys understand what i am trying to explain!

another example

remote reader-3 got asian Chanel on his local(hop1 with fast and low ecm) and on hop2 also(slow and high ecm)

some time when i watch Chanel from the reader-3 i got freeze and glitch and that time i found the ecm is too high so it mean i am not watching this Chanel from his local.

my 2nd question is.

i want to add services in my reader sections and i got already service file

now there is 2 way i can add service in my local and remote reader.

1rst way
service = name of the services what i have on local and remote

2nd way
services = ! name of those services which i d,not have on local and remote

please advise me which way is the best to select in oscam.server and oscam.user?

can some one please help me out,
i have followed all debian tut and in the end i got cccam web:16001 working fine
but oscam not starting
what else i can do to see why its not running?please help me out as my server carshed and i am trying to make this auto install one.
i have add my all old config files as they was working absolutly fine before and then give then 755 permition,restart server and yet again cccam running but no oscam.

i have checked my ports etc.....so realy cany work out what going on!!