Posts by sunlight786

i am geeting continiuing this message on web page.how can i resolve this mate?
[videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed

i have remove services=sunlight from every reader sections so that mean they are not selected(disable) if this corect way to disable then it was as when i start the thread and i do have problem like now.
the only thing give me benifit so far is by deleting those bat files clear a lot of those chanels which was showing black screen before.still only few left.

is it possible them files can update them self with out any hastle?

yes a lot of chanel are clearing mate after removing that bat files. as i am using oscam its own so i add c line as remote reader, i d,nt think it make me local as i got my own local which show hop1 and remote reader always show me hope2.do you have any alternative so i can add peers lines in oscam?if yes then where they need to go in please?is it good or bad to add that way? since i move into oscam too many thing are completetly diffrent then cccam.in cccam i just add peers c line in cccam.cfg as c lines finish with just yes or no

i am checking what clear and what not as my one of freind had same issue thats why i try to check mine and found same issue
i did not relise that once you tick or untick on web page it creat another bat file so i am glade that atleast now i know.still on my local 2,3 chanels not clear.d,nt now why.trying to figer out.

i have replace this file with what i had.
then in my own local reader i have add this line services = sunlight.

now do i need to add this line to all my remote reader,s well?

i also have some other files in my config folder as
-oscam.ird
-oscam.provid
-oscam.srvid
-oscam.tiers

do they need to update OR not as you update my services file.and if yes then how often them files need to be uptade?

....to get the logfile working once i add thses setting under oscam.conf then will it fill my entire disk space by loging?
the shell command mean to run on terminal with root login?

it is the asian chanel which d,nt clear and i cant see any [ pack] which can show as [ asain-pack] so where i need to add srvid? can i add srived for asian chanel to any pack? like in
[variety_pack_hd]
caid = 09**
provid =
srvid = 0F15,0EEF,0F22,0F1A,0F10,0F28
can i add all asian chanles srvid in this line?

should be like this

[asians_entertainment]
caid = 09**
provid =
srvid = ***********************************************************

i am totaly lost now mate. do you thing some one already have service file already include the asiand srvid?

in my oscam.server i d,nt have servise= under any [reader]
but in my folder as i said i do have a file called oscam.servise
i have opend that file and it finish with these lines
[adult_entertainment]
caid = 09**
provid =
srvid = D15C,D7C4,D7C3,D7C6,D7C7,D7C8,D7BF,D15D,D7C0,D7C2

can i add this line in the end
[asian_entertainment]
caid = 09**
provid =
srvid = ****************************************

in my dreamedite i can see all aisna srvid which i can replased in ****************

is it possible?

the tut you gave me still it is too complicated to me.

ok i have done it and majority chanels are come back ON and only few chanel left where picture is just black,and showing this
rejected group (1 ms) (of 0 avail 1) - G*O N*ws (no matching reader)

this chanel should work among some others

the one you recomend oscam service sly uk ,it seems in that thread #1 all asina srvid missing. is their ready made file? because iwas never succesful to make my own by using B16mcc guide.

yes i just see that i have oscam.server.bat, oscame.config.bat, oscam.services.bak and oscam.user.bat in my folder

so do you want me to delet them and leave the osca.server....... etc

?

great, in my reader setting i did not click any service , i know there is a lot to choose but nothing been selected but in etc folder there is oscam.service file.
also i think if i select just my own card group then that chanls is clear then why d,nt this service sid effect that time?

the funny thing is on peers group when i change chanel some time chanel comes on after a while.

ok this is message i am getting soon i change chanel which suppose to wrk
rejected group (1 ms) (of 0 avail 1) - 52134 (no matching reader)

then i change chanel which some time work and when not work i get this
rejected group (1 ms) (of 0 avail 1) - Max (no matching reader)

can you please tell me in this set up would i get any log file? or do i have change that line in [global]
from
LogFile = stdout
to
LogFile = /var/log file

then restart the oscam and see the log file?
?
so in my set up should every thing work then?i have my other freind who has same issue also and he is thinking to install newcs instead oscam because of that but i like to solve this issue.

i am using oscam its own as server and box have cccam 213. so box conect to osam with cccam protocol.i add c lines in oscam,server as remote reader.

group 1 is my own raeder
group 2 is c line(remote reader)
group 3 is cline(remote reader)

hi, since i move to oscam i have starnge issue as i am using oscam as card reader&server and box conect to server via cccam.i also add my peers c lines in oscam deviede by groups.
i have notis that a lot of randomly chanels are not clearing on my box while i am using just my peers group.and its is happening to all peers lines.i am using oscam 5070 unstable.
here is my configs.
# oscam.conf generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5070
# Read more: h**p://str**mb**rd.gmc.to/osca…on/doc/txt/oscam.conf.txt
###############################################################################
[global]
Nice = -1
LogFile = stdout
MaxLogSize = 102400
Sleep = 0
FallbackTimeout = 2
ClientTimeout = 5
ClientMaxIdle = 120
CacheDelay = 1
WaitForCards = 1
PreferLocalCards = 1
saveinithistory =1
readerautoloadbalance=1
lb_mode = 2
################################################################################
[monitor]
port = 576
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 1
#################################################################################
[cccam]
port = 1*****
reshare = 1
version = 2.1.3
stealth = 1
##################################################################################
[webif]
httpport = ****
httpuser = *****
httppwd = *******
httphideidleclients = 1
httprefresh = 60
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 1
####################################################################################
[newcamd]
port = ******@09**:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1

oscam.server
>>>>>>>>>>
[reader]
label = s**
protocol = smartreader
device = 001:003
caid = 09**
boxid = ********
detect = cd
mhz = 480
cardmhz = 357
ident = 09**:000000
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-g = 1
audisabled = 1

[reader]
label = remote-******
protocol = cccam
device = ******.**-**.biz,*****
user = ******
password = *****
group = 2
cccversion = 2.1.3
ccckeepalive = 1
audisabled = 1

oscam.user
>>>>>>>>>
[account]
user = ****
pwd = *******
group = 1,2
monlevel = 0
caid = 0**
ident = 09**:000000
cccreshare = 0

can you please advise me whay not chanels clear from peers lins as he has them chanels and it also showing me on hop2.

ok i am going to alter the time of reboot which will be 20min after the crossepg downloaded and will report back if it solve the epg issue.

i have ftp the box and found this
/usr/camscript/Ncam_mgcamd_1.35.sh

which is

#!/bin/sh

CAMNAME="Mgcamd-1.35"

remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp* /tmp/*mgcamd*
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/usr/bin/mgcamd_1.35 &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
killall -9 mgcamd_1.35
remove_tmp
;;
*)
$0 stop
exit 0
;;
esac

exit 0

can i edite or add any lines in it and try to run the script as cron job every 5minu so script can watch if the mGcamd frozen or stop it can make sure it auto start after reboot or any crash.

this is also what i think to try ,please tell me if its wrong

if i add this script to /var/script/mgcamdheck_userscript then chomd 755

here is the script

#!/bin/sh
if ps x |grep -v grep |grep -c mgcamd_1.35 >/dev/null
then
echo "mgcamd is ok."
else
echo "mgcamd is restarting."
/var/script/mgcamd_1.35_cam.sh stop
/var/script/mgcamd_1.35_cam.sh start
fi

then make a crontab as

# crontab -e
*/5 * * * * /var/script/CCcamCheck.sh

will it work?

hi,
i am using original dm8000 (image bh 1.3.3d ) and i am currently using mgcamd 1.35a .every often i found morning time my box is not displaying any premium channels and that time i press blue button to reconectt the magcamd and then box work fine.
i must need to tell you that i reboot my box every night at 3am and then 3:20am my crossepg get to update.where i have also found issue some time after updating the epg i only get epg for now&next and this situation i just restart the enigma2 and all epg loaded properly for 7 days.

so basically as you see i got 2 issue.
1- i think once the box reboot then mgcamd itself d,nt connect to server.
2- 20 minutes after reboot crossepg start getting update and after uptade epg failed to load properly into my usb(location)

can any one please advise me for that?
or any one can provide me a script to set as cron for every 5 minute to check if mgcamd stop or freeze then it make it to run.

also some thing to solve this epg issue please.

if we add usb tunner then will it perform as twin tunner?can we record 1 and watch the other?

hi, guys.
at the minut i am using darkstart 2 image on my dm500 clone, and i like to change but i need to know if there are any other images who can have vpn set up in there.?

i have add this file and now that message diappear mate, what info was in this file?do i need to change any thing in it?

also Irdeto was not tick in web info.

so apart of that is every thing ok?

also i need to ask you as i heard that oscan binery update every day, in that case do i need to update,s well?

i must need to tell youmy other server which are with smargo. in conf folder all i have 3 files and i d,nt have these type of error there. realy d,nt understand so far.

ok i have cope the whole information of the Srvid from the link you told me and past it into my existing srvid file and reboot the pc and now i am only having this on status.

can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded

and here is the whole status
and plz let me know what is look like?

OSCam cardserver started version 1.00-unstable_svn, build #5070 (i686-pc-linux)
version=1.00-unstable_svn, build #5070, system=i686-pc-linux, nice=-1
client max. idle=120 sec, debug level=0
max. logsize=102400 Kb, loghistorysize=4096 bytes
client timeout=5000 ms, fallback timeout=2000 ms, cache delay=1 ms
services reloaded: 0 services freed, 21 services loaded
userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
signal handling initialized (type=sysv)
517 service-id's loaded
33 tier-id's loaded
1 provid's loaded
can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
monitor: initialized (fd=6, port=***)
camd33: disabled
camd35: disabled
cs378x: disabled
newcamd: disabled
cccam: initialized (fd=7, port=1*****, crypted)
radegast: disabled
http thread started
creating thread for device 0
loadbalancer: can't read from file /tmp/.oscam/stat
waiting for local card init
reader thread started (thread=B78******, label=*****, device=0, detect=cd, mhz=357, cardmhz=357)
HTTP Server listening on port ****
slyu* card detected
slyu* ATR: ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **
videoguard2-reader] parental lock setting: FF ** FF 00
videoguard2-reader] type: VideoGuard B***B (09**), caid: 09**
videoguard2-reader] serial: ********, BoxID: ********, baseyear: *****
[videoguard2-reader] ready for requests
found cardsystem videoguard2
videoguard2-reader] sly** card detected
videoguard2-reader] type: VideoGuard B***B (09**)
s init for all local cards done
anti cascading disabled