Posts by supra59uk

thankyou for all the help got them working now lovely
just a quick question withh ccam config i just used the one the loaded when the cam loaded and added my line, but if i edit the file not deleting anything just putting things in order so it makes it easy to use rather than it being all jumbled together the file wont work why is this?
thanks paul

hi this is all new to me
i have just setup a host name with no ip and also setup the update client
whats the next step to test it to see if i can share to my daughter, and can i test it by using my internal
share which is already running,
please give a full instruction as possible because i have never done this before
thanks Paul

dont seem to be able to get in page not found i will have a play thanks guys for the help

hi guys just loaded the new config with my cline and now it says connection to ccam refused and check webinfo

any ideas thanks Paul

thankyou guys will try this and save for future use

tenbellow try clicking on the link you give me its been taken over by the fedral bl bl lol
take a look

thanks paul

i will give that ago great thanks could i delete most of the stuff in here or will that stop other things working

this is the config of the dm
is there anything in this to stop it working ?

#, caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address
#
# example:
#
# F: user1 pass1
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00
# outside these hours the share will not give cw's to the client
#
#
# F: user5 pass5 5 1 1 { } { } { } 192.168.1.1
c: 192.168.1.13 12000 ***** ******
id:id(:uphops), ... }
SERVER LISTEN PORT : 12000
#BOXKEY: /dev/sci0
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
# P: caid1:ident1, caid2:ident2, .., caidN:identN
#
# situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
# Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
# P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
#
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#
# In this file all provider idents are defined
# The info from this file is being used in the web interface
# format:
# <caid><ident> "Provider description"
#
#
#
# In this file all channel idents are defined
# The info from this file is being used in the web interface
# format:
# caid:ident:sid "Channel description"
#
#
# write wrong logins to file
# defaults is off
#
#LOG WARNINGS : /tmp/warnings.txt
#
# global setting for stealthy login to newcamd/newcs server, N line can overrule
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
# default: 0
#
#NEWCAMD STEALTH : 0
#
# load balancing between identical cards, list device names of card readers containing identical cards,
# optionally followed by a list of service id's which are to be excluded from loadbalancing
#
# LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }
#
# multiple loadbalance groups can be configured, by adding multiple lines
# warning: restart is required, when loadbalance group config changes
#
#example 1: load balance requests for three identical cards
#
# LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2
#
#example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available
#on one of the cards, so requests for these sids shouldn't be loadbalanced
#
# LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }
#
# in version 1.2.1 and lower there was a problem which could lead to disconnecting clients
# in version 1.4.0 network load was significantly reduced
# in version 1.7.0 dangerous password bug was fixed
# in order to take advantage of these fixes, all clients should upgrade
# with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
#
# default : accept all versions
#
#example 1: avoid disconnecting clients problem
#
#MINIMUM CLIENT VERSION : 1.3.0
#
#example 2: achieve network load decrease
#
#MINIMUM CLIENT VERSION : 1.4.0
#
#example 3: don't allow potentially wrong passwords (pre 1.7.0 has password bug)
#
#MINIMUM CLIENT VERSION : 1.7.0
#
# I***** smartcards: option to disable smart chid checking for i***** smartcards.
# Default, only chids advertised by card are accepted.
# This avoids a lot of unwanted card traffic
#
# But if smartcard has hidden/unknown chids, all chids should be tried.
# In that case specify 'TRY ALL CHIDS' option for cardreader.
# Use with care, enabling option causes more card traffic.
# Only use setting when some channels don't work without it.
# note: if even this setting don't help decode all channels, try using
# commandline arg -l, to disable all self-learning features (warning: slower)
#
#TRY ALL CHIDS : <device>
#
#example: card in /dev/ttyUSB0 gets ecm for all possible chids, not
#just the chids it officially supports
#
#TRY ALL CHIDS : /dev/ttyUSB0
#
# perform smartcard post init commands
#
# POSTINIT : <device> <filename> (<autodelete>)
#
# send commands in 'filename' to 'device', and delete 'filename' when
# optional 'autodelete' argument nonzero
#
#example:
#
#POSTINIT : /dev/sci0 /tmp/postinit
#
#example /tmp/postinit contents:
#c134000003000000
#c13201000a
#
# Option to override autodetected dvb api version. Restart needed.
#
#DVB API: <value>
#
# <value> <1 = no dvb, 1 = dvb api 1, 3 = dvb api 3>
#
# WARNING: only use when autodetect fails!
#
#example, disable nonworking dvb hardware:
#DVB API: -1
#
# Option to set global share limits
#
#GLOBAL LIMITS: { caid:id(:downhops), caid:id(:downhops), ... }
#
#example:
#
#GLOBAL LIMITS : { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# all users get no 0100:000080.
# and our 0622:000000 cards only for themself (1 hop down),
# and 0500 cards for themself plus one additional hop down.
# global limits are overridden by client specific limits (see F:)
#
# Option to reject shares with less than required downhops on clientside
#
#MINIMUM DOWNHOPS: <value>
#
# default: 0 (don't ignore any shares)
#
#example:
#
#MINIMUM DOWNHOPS: 1
#
# ingore shares that have less than 1 'downhops' (i.e. can not be shared
# further down to other clients)

hi ten below
that how i have done it the spider works fine all channels the dm wont clear
when i look in the ccam info of the dm and look at server i can see the cline but it says no card
and there is nothing in shares

update
firstly the wife had moved the card from lower lot to the upper so if im right that would mean it should have been set tp sci1 not 0 and i think when i have made changes to the configs i have restarted enigma and not stopped and restarted the cams would that make sence ? lol
well its clearing all now so thanks for the help

hi guys
trying to setup internal share
but cant get the dm800 to work
added 2 flines pass user ip
1 for spiderbox which is fine the other for dm800
which cant get working
these are my f lines and cline i used

F: user pass 192.168.1.11 spiderboxes ip works fine
F: user pass 192.168.1.12 dms ip

c: 192.168.1.13 12000 user Pass xtrends ip which as the card i want to share

can you see what im doing wrong
or any thing else i have missed

Thanks Paul

can anyone help ? please

hi thanks for getting back to me
i have now installed the cam which you sugested also used the configs which you pointed at but still no movies or sport

dm800 as blackhole 1.33 i think and 2.3 ccam also tryed with oscam as well
as for my interal share my f line is as follows
F: b#### pb#######
F: b##### pb#### both diff passwords and users
my ccamcfg for the dm is as follows

# F: user5 pass5 5 1 1 { } { } { } 192.168.1.1
c: 192.168.1.90 12000 B#### PB######
id:id(:uphops), ... }
SERVER LISTEN PORT : 12000
#BOXKEY: /dev/sci0
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo

this is from web server

2012/01/23 00:46:07 5A6E60 c linuxsat (0963&000000/10CF/62:8DC8): rejected user ident (120 ms) (0 of 0) (no card support 0963:000000)
2012/01/23 00:46:13 5A6E60 c linuxsat (0963&000000/10CF/62:9A96): rejected user ident (121 ms) (0 of 0) (no card support 0963:000000)
2012/01/23 00:46:22 5A6E60 c linuxsat (0963&000000/10CF/62:E9CE): rejected user ident (121 ms) (0 of 0) (no card support 0963:000000)
2012/01/23 00:46:31 5A6E60 c linuxsat (0963&000000/10CF/62:837E): rejected user ident (120 ms) (0 of 0) (no card support 0963:000000)
2012/01/23 00:46:39 5A6E60 c linuxsat (0963&000000/10CF/62:A294): rejected user ident (120 ms) (0 of 0) (no card support 0963:000000)
2012/01/23 00:46:45 5A6E60 c linuxsat (0963&000000/10CF/62:DE6C): rejected user ident (120 ms) (0 of 0) (no card support 0963:000000)
2012/01/23 00:46:53 5A6E60 c linuxsat (0963&000000/10CF/62:6110): rejected user ident (120 ms) (0 of 0) (no card support 0963:000000)
2012/01/23 00:53:06 5A6E60 c linuxsat disconnected from 127.0.0.1
2012/01/23 00:53:06 5A6E60 c thread 76FF74B0 ended!
2012/01/23 00:53:06 5A54B0 c client connected to 10000 port
2012/01/23 00:53:06 5A54B0 c encrypted newcamd:10000-client 127.0.0.1 granted (linuxsat, au=on (1 reader))
2012/01/23 00:53:06 5A54B0 c user linuxsat authenticated successfully (CCcam)
2012/01/23 00:53:06 5A54B0 c AU disabled for user linuxsat
2012/01/23 00:53:48 56D428 h unauthorized access from 127.0.0.1 flag 1
2012/01/23 00:59:48 56D428 h unauthorized access from 127.0.0.1 flag 1
2012/01/23 01:05:48 56D428 h unauthorized access from 127.0.0.1 flag 1
2012/01/23 01:11:48 56D428 h unauthorized access from 127.0.0.1 flag 1
2012/01/23 01:17:48 56D428 h unauthorized access from 127.0.0.1 flag
2012/01/23 00:47:03 5A6E60 c linuxsat (0963&000000/10CF/62:41E8): rejected user ident (120

not sure what all this means

you will notice i have just left the passwords as they were in the oscam files but will change when its working again

well hopefully you can make some sence of it all

thanks Paul

my setup is as follows et9200 vix 2.3 ccam 213+oscam 6189

all was well using my full sub sly card and i got a tuner problem but basically with out going into full detail i restored a previous backup and now i have been trying for the last two days to get it to clear my movies and sports chans i have checked the cams are running, i have checked my config files but cant get them back on rebooted every time, i have tryed altering the configs, i think its something to do with the box keys but im sure it dont even need them with these cams any help will be great to get me back on

also im trying to do a internal share with my dm800 again cant get that to work either if i go into the ccam info on my dm box and check shares i can see it but it says no card, but it shares with my spider no problem apart from the movies and sports, but if i get the et9200 to descamble that will sort my spider out

thanks Paul

thankyou for your support on this matter

its working a treat

thankyou i will give it ago
do i need to change ips in my configs or are they all just standard
thanks Paul

I to all

i have been trying to get this working for the last two days but cant seem to get it to unscramble my
movies and sport

these are my files im using

1. the only change i make to these are my box xxx
and passwords, should i be changing any ips ect ?

my cams are oscam 1.0 and 0.99 none work
and also im using ccam 2.1.3
which was sugested my a member from this site
2. also which cam will be doing the updating of the card with this setup if i can get it working?

3. should i have anything in the scce dir as there is nothing in it ?
4. can i put my card in any slot ? and is this what this is for device = /dev/sci0 or sci01

with vix latest image

oscam.conf

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000

oscam.user
[account]
user = test1
description = for local mgcamd or DVBAPI
pwd = test2
disabled = 0
uniq = 1
group = 1
au = lower card
caid = 0963:000000

oscam.server
[reader]
label = lower card
enable = 1
protocol = internal
device = /dev/sci0
boxid =
caid = 0963:000000
detect = cd
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101

ccam.cfg
{ caid:id:sid, caid:id:sid, ... } { begintime-endtime, ... } ) hostname/ip address
#
# example:
#
# F: user1 pass1
#
# user4 gets all cards at a maximum of 5 hops away from us,
# and get's to share them down two further levels beyond his own level.
# the share is only valid between 12:00 and 17:00 and between 19:00 and 20:00
# outside these hours the share will not give cw's to the client
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
id:id(:uphops), ... }
SERVER LISTEN PORT : 12000
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci1
SOFTKEY FILE :

ok well im sure one of you clever peeps can help
thanks Paul

i thanks for the reply i have entered these files but it wont clear the movies,sports,seems to clear other stuff any sugestions ? i have tried with my box keys and without still no joy, when entering the box keys do they have to be in hex with a space in between every two digits, know the keys are ok as they work in ccam 2.30

thanks Paul

hi could you please tell me are these file ok to use if im using oscam+ccam 213 without mgcam
also when i enter the box keys do they have a space between?
also the passwords test1 ect i assume i change these ?

Thanks Paul

thankyou for the quick reply

i will install your sugestions do i have to uninstall the other cams first ?
and what does the ts panel do ? thanks Paul
can any plugins mess the box up as there seems to be loads but im never sure what to load and what not to load crashed my box a few times already lol
i have a problem at the moment if i use fast forwards on 8x for a few mins then it hangs and i have to switch the box off with the switch been told thats not good for the box so hoping there is a cure for this
maybe some one else as had his problem and as a fix
im using the latest kernal and latest vix image driver 161 think i got all that right lol.

i do have another question what does hop1 hop2 ect mean i read something to do with distance, how would i know what hop i am? would i be hop1 if its my card ?

i think it would be a massive help to newbies if there was a glossary covering all terminalogy because when you read most of the posts they mention all sorts of things then ecm, emus ,hops , ccams , telnet, plugins , ,ect think you all get the drift lol well just a thought

thanks again for advice given

Hi to all

need some good advice to get the most out of my new et9200 cams, plugins, ect

i have got a full sub sly card which is working fine with ccam 2.3.0
but is there any other cams i can run to recieve any other channels off all the other sats as my system is motorised, i also have a spiderboxhd9000 which still opens lots of channels but i have taken this off my motorised system so lost all them channels now, i use this in my bedroom on 28e, you may be wondering why would you do that, well i want to get to learn these linux boxes as these seem to be a better bet for future useage and i love playing about lol.

so any sugestions would be great, look forwards to your help thanks Paul