Also followed this thread and have tried to help.
You're the only one I have heard about who have not got it running with a sd box!
What type of sd tuner and which country?
know we have discussed number entitlements and this has nothing to say, is different in from one country to another.
These settings will update your 093E card
[reader]
label = Viasat
protocol = internal
device = /dev/sci1
caid = 093E
ident = 093E:000000
boxid = xxxxxxxx
detect = cd
mhz = 450
cardmhz = 3150
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-u = 0
blockemm-g = 0
[account]
user = dvbapi
au = Viasat
group = 1
Here is the latest oscam to dm 600:
http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK/powerpc-tuxbox
download this: oscam-svn10630-powerpc-tuxbox-webif-Distribution.tar.gz
standing slightly in Section 3 on how to update oscam bin file, only difference is that on dreambox so is oscam bin file located in /usr/bin/:
http://linuxsat-support.com/showthread.php?t=30959
this is at least a beginning
You must use oscam,
and you have HD tuner? throw it in the ocean and get an sd tuner.
There is no solution to the problem, some say there are already solution for this in private oscam but think this is just nonsense!
The only known solution that is currently acquiring an approved Viasat sd tuner and associate card to this. You will then get a new boxid and card works again in oscam.
This now applies to all countries that supply Viasat channels 4.8E
Sooner or later Viasat forcing customers to use HD tuners again and it will cost them a lot of money. There are even many thousands who even uses sd tuners so this may take time.....
Not sure what country you belong to but in Norway
it is 78 entitlements for full sd package.
specify your country so I'm sure someone who can verify what is right of entitlements for your country.
Have you tried updating your card in sd-tuner?
Thinking of solution where you call automatic telephone answering.
Do not think it is correct with 86 Entitlements??for sd!
I have the full package and 78 Entitlements...
Searay
If you switch from the HD box to a SD box,
You get a new boxid !!
How are your files in oscam otherwise?
I've even tested solution @ digi247 describes,
price was / is 25 Euro each month and there were serious people.
Operated in several countries, one of them is italy.
server is g-box and client encrypted mgcamd in vpn tunnel.
It was picture the same day as PL disappeared in Norway, even HD channels that are now encoded with CD sweden are open.
Otherwise it was TV packages for the whole europe and more.
So if i understand you correct, i will have to take an SD box and pair my card to that, put in that boxid in OScam.serve
it is correct:40_002:
- - - Updated - - -
regarding newer builds of oscam so you do not need mhz and cardmhz, oscam have 357 as default.
I have almost the same problem, but here came the card not to work after it came in a SD box again. There is a picture on the SD box, but Oscam write channel is not open.
Viasat [***********] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
XXXXXX c XXX (093E&000000/009D/0460/AA:XXXXXXXXXXX535C1CEE314DXXXXXC4E): not found (75 ms) by Viasat
Searay: Have you added in boxid that is right for sd box?
indbyggeren: Newer oscam 1.20 works but you may need to change your settings on reader!
Card MHz and MHz.
Which box you have, image and how oscam.server configured?
if your card works in original Viasat tuner so the card is likely allready paried with this.
Solution is to acquire a sd box and connect the card to this and add new boxid in oscam and your card will work 100% again.
This can also happen with the second card that works today.
- - - Updated - - -
Perhaps you should also update your oscam, it is very old.
I have attached an edited opensc file for you..... this is tried & tested using two omnikey readers.
I took a new clean install of ubuntu 13.10 64-bit and uses only one reader.
and I've run the script for autoinstall of CCcam / oscam.
Have used your file but keep getting no readers!
2015/01/23 11:11:23 440008C0 h canaldigital [pcsc] Restarting reader
2015/01/23 11:11:23 440008C0 h canaldigital [pcsc] creating thread for device 0
2015/01/23 11:11:23 48003B40 r canaldigital [pcsc] Cannot open device: 0
I run this:
Code:
opensc-tool list-readers
only get this:
root@playlive:~# opensc-tool list-readers
Usage: opensc-tool [OPTIONS]
Options:
-i, --info Prints information about OpenSC
-a, --atr Prints the ATR bytes of the card
--serial Prints the card serial number
-n, --name Identify the card and print its name
-G, --get-conf-entry <arg> Get configuration key, format: section:name:key
-S, --set-conf-entry <arg> Set configuration key, format: section:name:key:value
-l, --list-readers Lists readers
-D, --list-drivers Lists all installed card drivers
-f, --list-files Recursively lists files stored on card
-s, --send-apdu <arg> Sends an APDU in format AA:BB:CC:DD:EE:FF...
-r, --reader <arg> Uses reader number <arg> [0]
-c, --card-driver <arg> Forces the use of driver <arg> [auto-detect]
--list-algorithms Lists algorithms supported by card
-w, --wait Wait for a card to be inserted
-v, --verbose Verbose operation. Use several times to enable debug output.
I think I'm missing something in ubuntu?
I have some old readers who works just fine (ID 076b:3021 OmniKey AG CardMan 3121)
but the new will not work (ID 076b:3022 OmniKey AG)
- - - Updated - - -
Figured a little more now, found out by comando:
root@playlive:~# opensc-tool -l
No smart card readers found.
root@playlive:~# opensc-tool -D
Configured card drivers:
cardos Siemens CardOS
flex Schlumberger Multiflex/Cryptoflex
cyberflex Schlumberger Cyberflex
gpk Gemplus GPK
gemsafeV1 driver for the Gemplus GemSAFE V1 applet
miocos MioCOS 1.1
mcrd MICARDO 2.1 / EstEID 1.0 - 3.0
asepcos Athena ASEPCOS
starcos STARCOS SPK 2.3/2.4
tcos TCOS 3.0
openpgp OpenPGP card
jcop JCOP cards with BlueZ PKCS#15 applet
oberthur Oberthur AuthentIC.v2/CosmopolIC.v4
authentic Oberthur AuthentIC v3.1
iasecc IAS-ECC
belpic Belpic cards
ias IAS
incrypto34 Incard Incripto34
acos5 ACS ACOS5 card
akis TUBITAK UEKAE AKIS
entersafe entersafe
epass2003 epass2003
rutoken Rutoken driver
rutoken_ecp Rutoken ECP driver
westcos WESTCOS compatible cards
myeid MyEID cards with PKCS#15 applet
sc-hsm SmartCard-HSM
setcos Setec cards
muscle MuscleApplet
atrust-acos A-Trust ACOS cards
piv PIV-II for multiple cards
itacns Italian CNS
javacard JavaCard (without supported applet)
default Default driver for unknown cards
I think your device needs to be labeled correctly Not 0. One of the Guy's with more knowledge with say for sure
Have a look here:
http://linuxsat-support.com/showthread.php?t=1712
Or if you have simplebuild installed:
http://linuxsat-support.com/showthread.php?t=30959
I can not find this in the file: reader_drivers = pcsc, ctapi;
- - - Updated - - -
and simple build I have allready installed as you links to!
Running oscam on ubuntu 13.10 and have new card readers that I do not get to work.
This reader
root@ubuntu:~# sudo lsusb
Bus 002 Device 002: ID 058f:6361 Alcor Micro Corp. Multimedia Card Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 076b:3022 OmniKey AG
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 076b:3022 OmniKey AG
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
USB Devices
Bus 002 Device 002: ID 058f:6361 Alcor Micro Corp. Multimedia Card Reader
iProduct 2 Mass Storage Device
iSerial 3 058F63616476
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
Bus 005 Device 002: ID 076b:3022 OmniKey AG
iProduct 2 Smart Card Reader USB
iSerial 0
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.2
Bus 004 Device 002: ID 076b:3022 OmniKey AG
iProduct 2 Smart Card Reader USB
iSerial 0
[reader]
label = canaldigital
protocol = pcsc
device = 0
caid = 0B00
detect = cd
ident = 0B00:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
log:
2015/01/22 17:56:06 0 s waiting for local card init
2015/01/22 17:56:06 1BC5860 r canaldigital [pcsc] Cannot open device: 0
oscam closes down after a while, what could be wrong??
application does not work as it should!
Try compiling your own oscam on the ubuntu with simplebuild.. Tutorial: Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild
I have allready done this but do not get started oscam by freshly oscam!
- - - Updated - - -
it worked out now:78:
Upgraded ubuntu to 14.04.1 LTS (GNU/Linux 3.13.0-43-generic i686 and used this tutorital:http://linuxsat-support.com/showthread.php?t=16479
Get error in startup, see picture! server starts normally after ca.10-20 seconds.
The problem is when upgrading to newer oscam svn,do not get started oscam.
root@ubuntupc:~# sudo oscam -b
oscam: /lib/i386-linux-gnu/libc.so.6: version `GLIBC_2.16' not found (required by oscam)
I have this file: eglibc_2.16.orig.tar.xz and may well installed it manually and how do I do it????
Project oscam and Newcs on the same server.
Is this possible on ubuntu instead of CCcam/Newcs?
To set up a oscamserver on ubuntu is no problem, but need help with Newcs, maybe 1.67.
Maybe someone allready have created this finished, newcsCheck.sh should also work since oscam also have this.
please come with input...
Why get klask notified that a moderator will approve it before he can answer again in thread??
you do not need this in oscam.dvapi:
P: 0B00: 000000 1
if you use it so this is correct:
P: 0B00:000000 # prioritise CAID 0100 with provider 123456
you can also take away:
ecmwhitelist = 0B00@000000:56,5B,68
Have never seen anyone use this on your card
- - - Updated - - -
your card is also just updated with these package:
2014/12/06 16:30:59 552E30 r upper [conax] Package: 19, id: 8014, classes: 0100107B, date: 2014/12/01 - 2014/12/31, name: 8014
2014/12/06 16:30:59 552E30 r upper [conax] Package: 15, id: 8010, classes: 01000080, date: 2014/12/01 - 2014/12/31, name: 8010
2014/12/06 16:30:59 552E30 r upper [conax] Package: 17, id: 8013, classes: 01000020, date: 2014/12/01 - 2014/12/31, name: 8013
