Posts by jojo36

/dev/sci0 it does read it with this i will try the other way again and let you know thankz for the help

when i changed this device = /dev/sci0 to device = 0 it stopped reading the card i,m not to sure were i,m going wrong i,m only using oscam on its on not with cccam

i,m now using oscam 6197 with unbuntu can anyone tell me the proper configs to make sure the card updates the entitlement with omniket readerthank-you

i tried this but doesn,t seem to be working

[account]
user = user
pwd = pass
description = for local mgcamd or DVBAPI
group = 1
uniq = 1
au = my_***_card
caid = 0963
ident = 1F1F:000000
cccmaxhops = 0
cccreshare = 1

this is the file i made in the oscam user
and here is the server file
[reader]
label = my_***_card
protocol = pcsc
device = /dev/sci0
caid = 0963
boxid = xxxxxxx
ecmwhitelist = 0963:3E,42,44,45,47,4E,53,54,61,62,68,69,6A,6B,6D,6F,71,72,73,77,78,79,7A,7C,7D,7E,80,8B
detect = cd
mhz = 500
cardmhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-g = 1
auprovid = 000963

any help is much appreciated

i use open pli beta image for a clone box and its very stable i can send it to you if you need it

ok got one off these boxes a few weeks back for some reason after watching the box for a while say 5 hours the box just go,s scrambled and the channel will not clear so i have to reboot the box to get the channel back on this has happened quite a few times now is this a patch fault or software anyone else having these problems any help is much appreciated also i am using the latest aquilla patch

Quote from nano

Yep thats really helpful :amazed:

I'm not that daft :doubt:

i only made a suggestion to you and you have an attitude like that its a common fault for people to put the card in the wrong way

make sure card is in the right way on the reader

try changing the mhz to 600 for both of them try that i read that on another forum somewhere

sorry for asking for help i will try and figure things out for myself , also i didn,t know what your your icon face meant in one of your replys and it says moneygrubber i went onto google and did a search for this and it says : a person bent on accumulating money can you explain yourself to me ten below as i have no intentions of trying to make money i only askesd for help and you are implying things can someone on the forum please delete my posts and account thank-you

to clear things up me and my friends pay the xxx card together we have motorised systems and i share with other servers for the football and boxing and for no other reasons this is the cheapest option out there for us to get the channels we require i only take local cards and not hops thats why i have 6 and i test the card for reliability so is it best to cut down on the servers as some are for back-up if a channel go,s down some of my friends have eagle hd receivers and how to you tell if a card is overloaded as it works fine in cccam not oscam

i only have 7 friends i posted about this being a mistake that i typed i reshare with 6 other people not my friends have i did something wrong as i have to explain myself

i only use this as a hobby and let people share my card so my friends can watch the football on saturdays i only use other servers cards for this reason and for no other how should i set the flines then if they are wrong as i say it doesn,t freeze when i use cccam only when i try oscam and the only reason i want this to work is for the boxing please explain howto set thing up correctly or can you give me a link to it, i have just realised my mistake i posted 17 friends instead or 7 i will now edit my last post

i only have about 7 friends and 6 servers that i use for football and i give them reshare of my card i only give them 0 0 0 0:0:2 when i set your fline

and give my friends 1 0 0 0:0:1 is this the wrong settings but when using cccam 2.14 i have hardly any problems

78 to 82ms if this is correct i have not tried it again from this morning but in cccam info the ecm,s were like 0.8882 to 1.2345 and then they would go low to 0.1212 which would be fine

ok should i change the oscam and cccam with the above file or just leave the one that was in the image the way it was , and yes i got it to work i flashed it with dreamup at the start and it would not work so i did it with flashwizard after advice from cazuela and it work but i had freeze problems

ok where abouts in the oscam should i look to change the mhz is it in the reader

had the same problems after putting an oscam/cccam image onto box a bad lot of freeze i even tried changing the mhz and put a smartcard clock frequency into the cfg file to see if it would help it didn,t , my question is is there any other cam thati can use to clear the channels pick tv and boxnation to share with my friends ,i havenowwent back to cccam 2.14 and do not have any freeze problems using a dm500 any help is much appreciated thank-you

ok i have added all clines and flines to the cfg file i have router port 18000 open i have removed the# from the file in the image i have added c-lines and f-lines to the cfg file and still not working for me to share to my friends

ok i have my port 18000 open on the router as use this with cccam 2.14 so i know it is correct do i need to open another one i have tried almost everything possible and have eliminated the # aswel of certain things i have been reading from the start i have been the one asking all the questions

has anyone else managed to get this image working by just adding there clines and flines to the cfg file

Quote from master G

Your problem is you need a unique username and password for each user.

When using joe bloggs for every user, only one will ever connect with those details.

i just put that as an example i give people the flines and they are all different usernames and passwords

is there another setup with oscam/cccam with a different image that i could try?