i have added the f-lines and c-lines to the cfg file but it see the clines ok but the f-lines do not connect i make my f-lines like this
for a server it is F: joe bloggs 0 0 0 { 0:0:2 }
and for my friends it is F: joe bloggs 0 0 0 { 0:0:1 }
these work fine when i use cccam 2.14 in my other setup for the dm500
can you take a look at the file on the first page incase i have to edit something to get it to work thank-you
as you can see this is me using my other box now
Success: I can see your service on xx.xx.88.207 on port (18000)
Your ISP is not blocking port 18000
yes cccam port is open i try the canyouseeme.org checking port 18000 and it says success your port is open
HOST ADDRESS:127.0.0.1 do i need to change this to say the ip of my box like 192.168.x.xx or like my dyndns address
i checked all the network settings and all seems fine to me but i can,t get my clients to connect to my card i,m at a loss as i,m sure i have done everything right as i said before in the cccam info i can see the servers but no clients
127.0.0.1:10001 |00d 00:00:52|newcamd | | | 1 | |
|xxxxxx.gotdns.com:1821 |00d 00:00:41|CCcam-s2s|2.1.3 |7ba5e7f6b959f79a| 3 | |
|xxxxxx.stx.nl:22001 |00d 00:00:41|CCcam-s2s|2.1.3 |423ec777b393ce46| 3 | |
xxxxxxx.dyndns.info:20001 |00d 00:00:51|CCcam-s2s|2.1.3 |fc819bc48a460e51| 5
Connected clients: 0
0 ACTIVE CLIENTS IN LAST 20 SECONDS
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
as you see it shows the servers but no clients
yes it is mate as its what i use for the cccam
SERVER LISTEN PORT : 18000
WEBINFO USERNAME :
WEBINFO PASSWORD :
TELNETINFO USERNAME :
TELNETINFO PASSWORD :
TELNETINFO LISTEN PORT :
WEBINFO LISTEN PORT :
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dreambox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
MINIMUM CLIENT VERSION : 1.7.0
#MINIMUM DOWNHOPS: 1
#### linuxsat-support.com ###
N: 127.0.0.1 10001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
this is the setup that was downloaded with the image now all i did was enter the c-lines and the f-lines into the cfg file as i said before i can see the servers but not my friends do i need to enable the down hops
ok i tried it again i can see the servers that i shar with in the cccam info page ok but its not connecting to the flines i have install here is what i,m getting in the oscam page
1970/01/01 0:04:18 35025B50 c anonymous disconnected from 84.13.197.91
1970/01/01 0:04:18 35025B50 c thread 35025B50 ended!
1970/01/01 0:04:18 34825B50 c encrypted cccam-client 62.252.9.166 rejected (invalid access)
1970/01/01 0:04:18 34825B50 c account '8wren' not found!
1970/01/01 0:04:18 34825B50 c anonymous disconnected from 62.252.9.166
1970/01/01 0:04:18 34825B50 c thread 34825B50 ended!
1970/01/01 0:04:18 34825B50 c encrypted cccam-client 92.251.93.165 rejected (invalid access)
can you tell me were i,m going wrong i also have a vu-solo box and even though the dreambox is working it will not connect to me using the solo even if i enter the details as my ip address on the local network any help is muchappreciated do i need to enter my flines into the oscam user list
ok will try it again in the morning but don,t know why it will not work for me thankz for all your help
no mate should it not be showing my friends to me ,i will test it again in the morning as my friends are using it now i went back to my cccam
yes i see that ok
no picture at all and it doesn,t show any other other server or client
this is all i get there is something wrong somewhere
1970/01/01 0:15:39 32825B50 c test1 (0963&000000/178E/62:F9BA): found (77 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:40 32825B50 c test1 (0963&000000/107D/62:5995): found (74 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:40 32825B50 c test1 (0963&000000/107B/62:F259): found (73 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:41 32825B50 c test1 (0963&000000/1BBE/62:2801): found (76 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:41 32825B50 c test1 (0963&000000/CCC4/62:4374): found (76 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:41 32825B50 c test1 (0963&000000/D025/62:E880): found (75 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:41 32825B50 c test1 (0963&000000/0EDE/80:5984): found (92 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:41 32825B50 c test1 (0963&000000/132B/62:3487): found (75 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:41 32825B50 c test1 (0963&000000/15BA/62:E17E): found (75 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:42 32825B50 c test1 (0963&000000/10CF/62:C1BB): found (74 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:42 32825B50 c test1 (0963&000000/232F/62:F446): found (75 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:42 32825B50 c test1 (0963&000000/183A/62:812B): found (75 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:42 32825B50 c test1 (0963&000000/1B5B/62:9F9E): found (75 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:43 32825B50 c test1 (0963&000000/C7A8/4E:81E9): found (65 ms) by cardslot (of 1 avail 1)
1970/01/01 0:15:43 32825B50 c test1 (0963&000000/0EE7/6A:87AD): found (78 ms) by cardslot (of 1 avail 1)
all i did mate was add the clines and the flines but it will not work for me
i,m not sure about oscam i have just been following what i have been told to do i,m trying to be able to watch pick tv and boxnation but they will not work with cccam so i,m trying to set my box up with this image to get it working but i have been unbale to do so can you give me any help please do i need to enable oscam as the cardreader from blue panel some way? also in the oscam web page ifo it was saying cardock and needinit ok
how do you add it to services i,m not familiar with oscam as i,m having problems getting it to work on a dm500
i flashed the dreambox with this image i then copied what fhat clines and flines i had saved from my cccam and put them into the new cfg file in this image i then added this n-line to the cfg file N: 127.0.0.1 10001 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 and put the card in and restarted i then went to the web log in page of oscam it see,s the card ok but no servers or friends what am i doing wrong do i need to open another port on the router or do i need to do anything in the oscam files to be able to see my friends any help is much appreciated
i can confirm that this channel will not work with cccam
ok mate will do
