Posts by cymbal

Hi,I just checked mine and my HDD is 'No Standby' and when I turn off in standby, I notice my HDD goes off after a few minutes. I also notice that the date scrolls every so often,so maybe on long standby it could freeze if left overnight which may cause the box to lockup. Try different time settings in the 'storage device' and see if that helps!

Have you turned off the box from the back switch, wait a few seconds and then turn it back on,it should boot up okay to enigma2. If it doesn't,turn off again and hold okay button in and turn on from back till you see FORC on display,then press 'UP' button and it should boot back to Spark. I have openatv 4.2 and have found some images do not turn off Hdd on standby. I have Champc on my box at present and I just press stanby, then turn off from back {I have a switch that turns off so do not to reach in behind the box all the time} .I never had a problem rebooting box . Hope this helps..

Hi, regarding moving pages, I found if next page doesn't move down with PAGE down button, try 0 number button to move down and 8 to move up. That works for me most times!

- - - Updated - - -

Sorry forgot to mention ,that works with my amiko alien2 remote.

Yes,thanks Banny,I will keep an eye what i'm doing and not opening files on the wrong computer! Will keep up to date with backups on the two lappies in future!

Hi all, Just to let you know all is good again. I uninstalled firefox and downloaded the newest version and now back up and running as normal. I checked on the web and it seems that it caused problems before with firefox. Glad it was nothing major, as I never screw around with the reg files! I will be more careful in future.

Hi all, Just to let you know all is good again. I uninstalled firefox and downloaded the newest version and now back up and running as normal. I checked on the web and it seems that it caused problems before with firefox. Glad it was nothing major, as I never screw around with the reg files! I will be more careful in future.:16_002:

lHelp!,I downloaded the above rar file onto my my windows vista home premium laptop to put the file onto my other laptop which has xp on it, but by mistake I opened it on vista and now it has changed the reg DWORD to the xp file .When I try to open my firefox browser it gives me the error message 'cannot load XPCOM.Any ideas how to get my proper dword for vista back? I lost all my system restore points too, so cannot go back to earlier points.DWORD file on PosReady is :0000001.Thanks..

Just to let you know,Ichannel [with proxy]stand alone extension is back working again and.up to speed with servers. It may have been a glitch, or if someone has fixed it,kudos to them.A big THANK YOU to masterg for the download!

Good news! I had that as a seperate extension,but on tsmedia 7.9 beta 1channel is still working,a bit slower to load than normal,but working fine!

Yes,same here.I get a green screen too if I try to get links.Pity, it's very good and hopefully it may be available again sometime soon,thankful it lasted this long!

Hi flapjack, I'm running ts7.9 beta,amiko alien 2 and I have noticed that sometimes my m3u player says the same [error playing stream] and none of my m3u files will open,but I turn off the box and switch off, wait a few seconds then switch back on my m3u files are all there again! Give it a try it may work for you!

Did you make a folder first named enigma 2, then put the two files in it,they are not zipped. by the way I found a small bug with the image to do with my playback of movies from my hdd,sometimes it hangs othertimes the spinner stays up and othertimes it works fine.Could have something to to do with my hdd paths.Tried it with my plugin media player, seems to work mostly. As it's still in beta testing you should expect these things.No good if it worked straight away, no fun in that!

Yes,you can load it the other way . Make sure you are on enig 2,turn off box ,disconnect hdd usb if you have one on back usb,put usb stick in , hold down okay button, turn on box, hold ok until forc comes up, then press right and should say uld.Let it run the full course till sucess and boots. The imgage I have has terr service on for RTE,but you con change that to whatever terr channels you want.Simply go to setup ,tunerconfig,and change to your area or you can disconnect tuner.Then if you just want sat channels, go into button setup, and change buttons to what you like, I have ok button on channel list for example. Thanks to all concerned and mods and paulb for all the efford involved. I find a great img and all working perfect and i know it will imrove even more with time. The people who complain should read all the guides and tips that on this great forum. If thay find this hard, thay should tried to setup a dreambox when they first came out!:54_002:

Yes smiggy1974, on tsmedia go to icefilms ,a to z list, and you will find several movies sbs.,including titanic sbs,wolverine, underworld, gravity, ghosts of the abyss and several more. Most work with movreel or billionupload servers, try them all .

Glad to see forum back up and running, you don't reliase how much you rely on it until it's not there! Great work guys for your hard work on keeping it alive, much appreicated!!!

Just an update,I put in frankens*y skin and all perfect now,thank you to fraggle121! Yes dr_funk, I think picture is better, maybe we should have gone to specksavers earlier!!

No luck with the with the plugins, but I like osdadjustment for getting the best size out of the skins, as some skins tend to be off on the bottom. Cheers..

Thanks spectrum#, will give it a try!

Hi martinxp, put in the two files above and the graphics were still too large. So, changed the default skin [aihd] to pli-hd and all is fine now. A pity, I liked the blue default skin too. Anyway, all is good now,thanks again!

Thank you martinxp! The image is very good ,very steady and working fine! Cheers..