Posts by jooe007

the conax card is no active i have oscam the conax card has the eleven sport package but it is not yet active use oscam to read it gives me error reads card atr but does not take activation

2020/01/12 15:46:50 00000000 s (main) System name = Linux

2020/01/12 15:46:50 00000000 s (main) Host name = zgemmah7

2020/01/12 15:46:50 00000000 s (main) Release = 4.10.12

2020/01/12 15:46:50 00000000 s (main) Version = #1 SMP Mon Jun 3 01:00:42 UTC 2019

2020/01/12 15:46:50 00000000 s (main) Machine = armv7l

2020/01/12 15:46:50 00000000 s (main) Stb model = h7

2020/01/12 15:46:50 00000000 s (main) Stb boxtype = h7

2020/01/12 15:46:50 00000000 s (main) creating pidfile /var/tmp/oscam-stable.pid with pid 25022

2020/01/12 15:46:50 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled

2020/01/12 15:46:50 00000000 s (main) signal handling initialized

2020/01/12 15:46:50 00000000 s (led) LED support is not active. Can't detect machine type.

2020/01/12 15:46:50 00000000 s (net) cccam: initialized (fd=3, port=12000, prio=1 [ SO_PRIORITY IP_TOS IPV6_TCLASS ])

2020/01/12 15:46:50 00000000 s (reader) conax_sci0 [internal] creating thread for device /dev/sci0

2020/01/12 15:46:50 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms

2020/01/12 15:46:50 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms

2020/01/12 15:46:50 7A5C5832 r (reader) conax_sci0 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)

2020/01/12 15:46:50 7A5C5832 r (reader) conax_sci0 [internal] Reader sci internal, detected box type: h7

2020/01/12 15:46:50 234CEEE2 c (client) plain dvbapi-client granted (anonymous, au=off)

2020/01/12 15:46:50 234CEEE2 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-stable/oscam.ccache

2020/01/12 15:46:50 7A925790 h (webif) webif: decompressed 171999 bytes back into 413456 bytes

2020/01/12 15:46:50 7A925790 h (webif) HTTP Server running. ip=:: port=20002

2020/01/12 15:46:50 234CEEE2 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)

2020/01/12 15:46:50 234CEEE2 c (dvbapi) Detected /dev/dvb/adapter1/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 31 (oscam limit is 64)

2020/01/12 15:46:50 234CEEE2 c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Invalid argument

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 0C41 PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 20-1-2019

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1813 ECM_PID: 0C41 PROVID: 000068

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B01 ECM_PID: 0D09 PROVID: 000000

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1803 ECM_PID: 0DD1 PROVID: 000000

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1861 ECM_PID: 0E35 PROVID: 000000

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 0D6D PROVID: 032A00

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 1884 ECM_PID: 0CA5 PROVID: 000000

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186C ECM_PID: 0E99 PROVID: 000000

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 ecmpid 8 CAID: 06ED ECM_PID: 0EFD PROVID: 000000

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 found 9 ECM pids and 11 STREAM pids in CA PMT

2020/01/12 15:46:51 234CEEE2 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

2020/01/12 15:46:51 7A5C5832 r (reader) conax_sci0 [internal] card detected

2020/01/12 15:46:51 7A5C5832 r (reader) conax_sci0 [internal] ATR: 3B 24 00 30 42 30 30

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] ERROR: IO_Serial_Write: Written=0 of 5 (errno=22 Invalid argument)

2020/01/12 15:46:53 7A5C5832 r (-) -- Skipped 10 duplicated log lines --

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] Warning: needed try nr 2, next ECM has some delay

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] ERROR: IO_Serial_Write: Written=0 of 5 (errno=22 Invalid argument)

2020/01/12 15:46:53 7A5C5832 r (-) -- Skipped 10 duplicated log lines --

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] card system not supported

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] Normal mode failed, reverting to Deprecated Mode

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] Error: no card is present in readerslot!

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] Deactivating card

2020/01/12 15:46:53 7A5C5832 r (reader) conax_sci0 [internal] Error activating card.

2020/01/12 15:46:54 7A5C5832 r (reader) conax_sci0 [internal] ATR: 3B 24 00 30 42 30 30

2020/01/12 15:46:55 234CEEE2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2020/01/12 15:47:02 7A5C5832 r (-) -- Skipped 1 duplicated log lines --

2020/01/12 15:47:02 7A5C5832 r (reader) conax_sci0 [internal] Warning: needed try nr 2, next ECM has some delay

2020/01/12 15:47:05 234CEEE2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2020/01/12 15:47:08 7A5C5832 r (reader) conax_sci0 [internal] card system not supported

2020/01/12 15:47:08 7A5C5832 r (reader) conax_sci0 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

2020/01/12 15:47:08 7A5C5832 r (reader) conax_sci0 [internal] card initializing error

2020/01/12 15:47:10 234CEEE2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2020/01/12 15:48:05 234CEEE2 c (-) -- Skipped 10 duplicated log lines --

2020/01/12 15:48:16 7A925790 h (-) -- Skipped 3 duplicated log lines --

2020/01/12 15:48:16 7A925790 h (webif) Refresh Server requested by WebIF from 192.168.2.103

2020/01/12 15:48:20 234CEEE2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2020/01/12 15:48:25 7A925790 h (webif) Refresh Server requested by WebIF from 192.168.2.103

2020/01/12 15:48:25 234CEEE2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

2020/01/12 15:49:20 234CEEE2 c (-) -- Skipped 10 duplicated log lines --:whatthefuck:

help extration rsa conax card

thanks
I have this problem that is described there only in a pc with ubuntu 12:04 server 64 bet while the other server always with ubuntu 12:04 32 bet with the script and stoppre cardserver.sh can not start without problems and also the part oscam every time you restart the PC I thought that the problem depended on some library
I'll try again with your procedure
thanks

hello the only command that takes to boot
/ usr / bin / oscam-b
and
sudo / etc / init.d / start cardserver.sh
to make executable scripts I gave the command
sudo update-rc.d defaults cardserver.sh
while to stop and restart using the different commands
sudo / etc / init.d / stop cardserver.sh
and
killall-w oscam> & 2
give error
the script does not run with stop and restart only with the start of work

thanks

stop oscam

killall -w oscam >&2

/etc/init.d$ killall -w oscam >&2
-bash: line 6: killall: command not found

I changed rc.local

Code:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

/usr/bin/oscam -b

exit 0

reboot pc not start oscam

only with the command
/ usr / bin / oscam-b
running
then after the boot command I run the stop command and I always get the error 127 at line 9: killal comand not found

stop oscam
killall -9 oscam

error

/etc$ killall -9 oscam
-bash: line 9: killall: command not found

oscam

/usr/bin/oscam

cardserver.sh

#!/bin/sh -e
case "$1" in
start)
echo "Avvio Oscam Server"
/usr/bin/oscam -b >&2
sleep 5 >&2
;;
stop)
echo "Arresto Oscam Server"
killall -w oscam >&2
;;
restart)
echo "Riavvio Oscam Server"
killall -w oscam >&2
sleep 30
/usr/bin/oscam -b >&2
sleep 5 >&2
;;
*)
echo "Usage: $0 {start|stop|restart}" >&2
exit 1
;;
esac

rc.local

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.










exit 0

thanks

hello i have a problem with my pc with ubuntu 12:04 server restart does not restart the oscam with this I have to manually restart the terminal command sudo / etc / init.d / cardserver.sh and start oscam restarts if I try to stop it I always daterminale from / etc / init.d $ sudo / etc / init.d / stop cardserver.sh
Stop Oscam Server
/ etc / init.d / cardserver.sh: 10: / etc / init.d / cardserver.sh: killall: not found I get a written message command failed with error code 127
thanks