Posts by alibaba1802

  • OpenBox S9/S10 Firmware Tool by MST Latest Version

    This tool allows you to:
    - analyze Openbox S9/S10 firmware file (*.abs)
    - extract and replace channel list with TP_PROG.dbs file (e.g. you can extract list from .abs edited with SetEditHD100 tool)
    - extract and replace channel list with TP_PROG.udf file (e.g. you can edit TP_PROG.udf file with SetEditHD100 tool, then import it back to *.abs)
    - preview, extract and replace background logo file (Back_logo.m2v)
    - preview, extract and replace boot logo file (Boot_logo.m2v) (preview is not working for firmwares with non pure m2v format boot logo)
    - check block's CRC and fix it
    - extract and replace whole blocks and blocks's data only
    - find firmware duplicates (firmwares with the same maincode block CRC, but e.g. different logo or channel list)


    Things that tool cannot do, but maybe be able to do in future:
    - decrypt maincode, for example to get firmware release date
    - preview boot logo for some firmwares with non pure m2v format



    WARNING:
    Important note in case of replacing Boot and Background Logo.
    In firmwares we can find logos (boot and back) which have pure m2v format, an those can be previewed in my tool. And we can find logos with not pure m2v format, and those cannot be previewed in my tool.
    You can replace pure m2v (visible in tool) logo with any other pure m2v format file, and you can replace non-pure m2v logo (not shown in tool) with any non-pure m2v logo file.
    Do not replace pure m2v logo with non-pure m2v file and vice versa!


    Thanks MST

  • Help with box reanimator

    Quote from alffront

    i tried all the possible tools.
    I really think it is the cable. Maybe USB to Serial doesn't work.
    I played with the USB/serial driver setting to adjust it to the value of the fix tool, COMport, bit rate,.etc
    No luck


    If the noclone.rar (posted by me) dont work......... serial doesnt work.
    Try only via RS-232, like phonix says.

  • Help with box reanimator

    Quote from phonix

    A usb to rs 232 will not work you need to use a a null modem cable connected directly from the box to a laptop/pc via rs232


    when you do the recovery it can take nearly 15 min and you way need to try several times to get it to work or try different images


    I never use a usb to rs232 for openbox, but for ariva ts-100 and it works.

  • Satellite Director

    Satellite Director replaces the compass to locate a TV satellite.
    Set or enter the GPS location, select the TV satellite and point your phone to the *** to target (find) the TV satellite. You have found the satellite when the white ball is in the white circle and the cyan ball is in the cyan circle. Align, in azimuth, the offset arm of the satellite dish with the cyan arrow on the phones display and the satellite dish is aligned with the satellite.
    Selectable audio tone, camera preview, continuous mode (no pauze) and color pickers may make it easier for you to find the TV satellite.





    Download and website:


    Code
    http://www.zekitez.com/satdir

  • Help with box reanimator

    Quote from alffront

    USB to RS-232 serial interface
    I do not have an rs-232 port on my laptop


    Maybe this is the problem


    Last solution, download this file: noclone.rar
    Try this:


    1) Load EromUpgrade and run it. Select "Upgrade" and check the "bootloader".
    Select the image "HDS2_CMT_Eng.abs" and give "Next".
    Once you finish the upgrade will show us these symbols " - - ". Turn off satbox.


    2) Run EromUpgrade again. Select "Upgrade" and check the "bootloader".
    Select the image "HDS2_SCMT_20110315.abs" and give "Next".
    Box wii say "boot" and " - - ". Turn off satbox.


    3)Again run EromUpgrade. Select "Upgrade" and check the "bootloader".
    Select the original image "HDS2_DUMP.abs" and give "Next".


    Enjoy the resurrection. Keep original dump safe.

  • Controloid (Free)

    Controloid is a Enigma Web-Interface Client. (Dreambox-Models 500 / 500+ / 5600 / 5620 / 600 / 7000 / 7020).
    The aim of Controloid is the everday use (instead of the remote control). Many features are also available off-line. For example you can plan your timers during a train journey. Controloid synchronize the data automatically.


    Features:
    * Access to all TV- and Radio-Bouquets (with EPG preview)
    * EPG detail info
    * Access to your recordings (deleting movies in off-line modus available)
    * Organize your timers (also off-line)


    Requirements:
    * Receiver with ENIGMA Webinterface.
    * For video-streaming a Player which supports TS-Streams (e.g. VPlayer from the android market).


    There is only a limited functionality with some older ENIGMA versions.




    Controloid (Free) (Android) - Download

  • AndroidDreamer Beta 0.65 of January 15, 2012

    AndroidDreamer is an application for Dreambox-owners (or any Enigma1- or Enigma2-based satellite-receiver) which lets you watch your Dreambox on your Android via streaming in LAN and remotely over 3G/HDSPA/WIFI. It will later on also replace your real remote-control with an virtual one so you can control your Dreambox directly from your Android-device.
    AndroidDreamer (ANDR) - now with streaming in Local LAN and remotely over 3G/HDSPA/WIFI. Works with most Enigma-based receivers (Enigma1 and Enigma2) such as Dreambox, xTrend, VU+ etc. For video-streaming, players such as vPlayer, MX Video Player and DaroonPlayer are supported.





    AndroidDreamer (Android) - Download

  • Firmware Openbox S10 14/01/2012 !!!


    Sorry, but no information about s12.
    :(