loaded it and sent to
usr/lib/enigma2/python
BoxBrandingTest.pyo
it's the same error ....no module found....
loaded it and sent to
usr/lib/enigma2/python
BoxBrandingTest.pyo
it's the same error ....no module found....
root@dm8000:~# opkg install /tmp/*.ipk
Installing enigma2-plugin-systemplugins-ciplushelper (5.2) on root
python: can't open file '/usr/lib/enigma2/python/BoxBrandingTest.py': [Errno 2]
No such file or directory
Removing any system startup links for ciplushelper ...
Removing any system startup links for cihelper.sh ...
Configuring enigma2-plugin-systemplugins-ciplushelper.
root@dm8000:~#
root@dm8000:~#
root@dm8000:~#
root@dm8000:~# reboot
has anyone managed to get the module running on openvision image
Display Moretry to install it and you will know
Send ipk file via FTP (via DCC or FileZilla) to tmp> / var / temp
after over telnet:
opkg install /tmp/*.ipk
reboot
I have installed but still can't find any module this image works fine on the dm8000
only if I get the module running
I have to install something to find the module
Try the attached CiPlusHelper.
it is py3 image....does it fit
finally i managed to flash openvision thanks for all the help it doesn't find the CI module, I have to install something to find the module
tried many images because the box freezes, can't do anything until I disconnect from the power
only dreamelite and openvision image are slightly better than the others
this image can be flashed without problems ....openvision-e2-multilanguage-py2-10.2-r382-dm8000_nf .....but I couldn't get module CI to work
therefore want to test them here
openvision-e2-multilang-py2.7-12.1-r454-dm8000-20220711_flash
openvision-e2-multilang-py3.10-12.1-r454-dm8000-20220713_flash
tried flashing openvision didn't work
INVALID IMAGE (OR OLD VERSION)
still don`t no which bootloader you have
please try this image in attachment, first unrar it
this one I flashed without problems
how should I flash openvision now?
i have it
DM8000 second stage loader #84 (2011-09-01)
thanks tested but it's the same
dreambox invalid image (or old version)
Hello
how can i reflash dreambox 8000 to openvision image tried but i get this error...... dreambox invalid image (or old version)
tried with here
openvision-e2-multilang-py2.7-12.1-r454-dm8000-20220711_flash
openvision-e2-multilang-py3.10-12.1-r454-dm8000-20220713_flash
can i test this image to the dm 8000 if anyone has tested
BPanther Neutrino Image för dm 8000
I took out both the hard drive and the fan it's the same problem
I change some channels or back and forth the box freezes, can't do anything until I turn it off from the power
sometimes when i restart the box freezes then also have to disconnect from power and open
i have tried many image also its same what can do more any suggestions
hei hei...
try to change the power-cable of your DM8000... maybe it sounds stupid... -but- try it...
I tested it is the same there is hard drive and fan that is mounted it can be from them intend to relax them and test
tested both tuners it is the same error
it hangs when I change the channel then I get turned off from the power
when watching a channel nothing happens it is a problem when I change channel 7-8 times
Hello
dreambox 8000 gets stuck too much will have to restart from power
sometimes when i change channel it gets stuck sometimes when i restart the box it gets stuck test many image it is the same at all
then there is something with the box what can it be any tip?
I told my friend soon I'll throw this box out the window it has dvd player we have tested if it works with this image
we put a dvd disc it works without problems but when we take it out and put another dvd disc does not work immediately dvd player disappears from menu so have to restart the box then dvd player comes to menu again and other dvd disc works we have to start about the box all the time when we change dvd disc ??? what could be the problem is the dvd player maybe it is old or image
I have flashed to openpli 8.2 everything works without problems we will see in the future with py3
thank you for your help
thanks my master installed without problems but can not find it on menu or plugins
Its a dependency/module not a plugin.
Maybe the FanControl plugin isn`t compatible with python 3 images yet.
I also think it can be
Maybe the FanControl plugin isn`t compatible with python 3 images yet.