Posts by yugi

Quote from prilly1

works just fine..

no. Is not working.

░░ The job identifier is 8847 and the job result is done.
Apr 21 22:38:41 nuvp systemd[12553]: oscam1.service: Failed to locate executable /usr/local/bin/oscam1: No such file or directory
░░ Subject: Process /usr/local/bin/oscam1 could not be executed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ The process /usr/local/bin/oscam1 could not be executed and failed.
░░
░░ The error number returned by this process is ERRNO.
Apr 21 22:38:41 nuvp  systemd[12553]: oscam1.service: Failed at step EXEC spawning /usr/local/bin/oscam1: No such file or directory
░░ Subject: Process /usr/local/bin/oscam1 could not be executed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ The process /usr/local/bin/oscam1 could not be executed and failed.

Hi,

Anyone have load this image ?

I tryed in 2 GB800SE, and the GB don t accept the image ...

I tryed other images and the upload was ok....

Is any special trick ?

HI,

I am new with MAG devices.

I tryed to upload my m3u list from my android box, but after iload the channels every time I enter in iptv app it gets almost 3 minutes to change screen.

change channel will take almost 4 minutes ?

Is this normal ?

what am i doing wrong ?

The m3u file that i use work like a charm in vlc and android box ...

can anyone help me out ?

Quote from joeuser

I am not at my PC now, but if you use simplebuild, it will download it for you. Old instructions, but basically still correct are here: http://linuxsat-support.com/showthread.php?t=30959

(Sent from my A/S10 using Forum Fiend OSP v1.3.3.)

http://www.streamboard.tv/oscam/wiki/crosscompiling

Mate thanks for your reply.

The question is that I don t have simple build for mac ....
That s why I asked for a link to download ...
Can you get me one copy ? I will avoid the time to download or create a VM just for that ...

Cheers

Hi
I would like to get the toolchain for mipsel for compile oscam for gigablue and Dreambox and sh4 on linux PC

Anyone could supply me a link to download ?

cheers

another funny thing is that i have tested this situation on DREAMBOX from a freind of mine and in one AZBOX with the same image (OpenRSI) and same emu and nothing happened...

So i can confirm that this is crap from Gigablue !!!!

@dontworry...




Could you fix this problems? I've just bought a GigaBlue Quad Plus and have the same troubles. It drives me crazy. I'm using openATV 4.1.




Thanks!

hi
I fix this crap downgrading the drivers to older release.
Now is fast again ....
I think Gigablue is loosing quality ....
Attention my fix bring some extras ...
All working correct now except the info of Quality of Sinal in the screen ....

Quote from yugi

Hi
i m facing serious delays .. about 30 seconds in some channels when change channel with CCcam.

i have made this experience (test with CCcam 209/ 221/214/230 ) all reveal the same delay ....

when it begin to open do not stop /freeze ... works like a charm ...

I have checked the level of sinal in that channels that demonstrate the delay with this cam, and the same is ok ....

I´m using home server in Linx and 2 gigablue800 with OpenRSI. The delay is only when I change to some channels ... not all

i have tested with other receiver from a freind of my a box from other brand (the cheap ones spark) with the same conditions and the delay vanish ...
i have reinstall all the firmware in my giga because i think that is a problem with them but no...

Finally i have changed the emu to mgcamd and the delay vanish ....

i wolud like to ask is someone can confirm that the same is happend and if so is possible to fix ?

here is a simple log when happend this crap ...

here is when the channel is open fast ....

and here is when i change and have to wait some times 30 seconds till i got image

Display More

Solved !!!!

the problem here is caused by the fantastic support of Gigablue (change the drivers and all came back normal...... (use older drivers ....))

i have the same
now the service start at boot .. but i have to restart manually every time the box restart after power down ...

Hi
i m facing serious delays .. about 30 seconds in some channels when change channel with CCcam.

i have made this experience (test with CCcam 209/ 221/214/230 ) all reveal the same delay ....

when it begin to open do not stop /freeze ... works like a charm ...

I have checked the level of sinal in that channels that demonstrate the delay with this cam, and the same is ok ....

I´m using home server in Linx and 2 gigablue800 with OpenRSI. The delay is only when I change to some channels ... not all

i have tested with other receiver from a freind of my a box from other brand (the cheap ones spark) with the same conditions and the delay vanish ...
i have reinstall all the firmware in my giga because i think that is a problem with them but no...

Finally i have changed the emu to mgcamd and the delay vanish ....

i wolud like to ask is someone can confirm that the same is happend and if so is possible to fix ?

here is a simple log when happend this crap ...

here is when the channel is open fast ....

6:18:35.109 CCcam: remote ecm -> 192.168.1.1:12000 0x1802(0x000)
16:18:35.620 CCcam: remote ecm <- 192.168.1.1:12000 ok (took -nan seconds)
16:18:35.625 CCcam: cam[0] ecm odd ok caid:0x1802 id:0x0 pid:0x441 TV ............/Multicanal (30W)/SABC (68) (took -nan seconds)

and here is when i change and have to wait some times 30 seconds till i got image

16:18:27.855 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
16:18:27.855 CCcam: remote ecm -> 192.168.1.1:12000 0x1802(0x000)
16:18:29.483 CCcam: remote ecm <- 192.168.1.1:12000 ok (took -nan seconds)
16:18:29.490 CCcam: cam[0] ecm even ok caid:0x1802 id:0x0 pid:0x441 TV ........................
16:18:35.109 CCcam: remote ecm -> 192.168.1.1:12000 0x1802(0x000)
16:18:35.620 CCcam: remote ecm <- 192.168.1.1:12000 ok (took -nan seconds)
16:18:35.625 CCcam: cam[0] ecm odd ok caid:0x1802 id:0x0 pid:0x441 TV ............................

Does this append only to me ?
Can anyone confirm ...

I have 2 gb800se with the same problem !!!

Hi
i m facing serious delays .. about 30 seconds in some channels when change channel with CCcam.

i have made this experience (test with CCcam 209/ 221/214/230 ) all reveal the same delay ....

when it begin to open do not stop /freeze ... works like a charm ...

I have checked the level of sinal in that channels that demonstrate the delay with this cam, and the same is ok ....

I´m using home server in Linx and 2 gigablue800 with OpenRSI. The delay is only when I change to some channels ... not all

i have tested with other receiver from a freind of my a box from other brand (the cheap ones spark) with the same conditions and the delay vanish ...
i have reinstall all the firmware in my giga because i think that is a problem with them but no...

Finally i have changed the emu to mgcamd and the delay vanish ....

i wolud like to ask is someone can confirm that the same is happend and if so is possible to fix ?

here is a simple log when happend this crap ...

here is when the channel is open fast ....

Quote

6:18:35.109 CCcam: remote ecm -> 192.168.1.1:12000 0x1802(0x000)
16:18:35.620 CCcam: remote ecm <- 192.168.1.1:12000 ok (took -nan seconds)
16:18:35.625 CCcam: cam[0] ecm odd ok caid:0x1802 id:0x0 pid:0x441 TV ............/Multicanal (30W)/SABC (68) (took -nan seconds)

and here is when i change and have to wait some times 30 seconds till i got image

Quote

16:18:27.855 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
16:18:27.855 CCcam: remote ecm -> 192.168.1.1:12000 0x1802(0x000)
16:18:29.483 CCcam: remote ecm <- 192.168.1.1:12000 ok (took -nan seconds)
16:18:29.490 CCcam: cam[0] ecm even ok caid:0x1802 id:0x0 pid:0x441 TV ........................
16:18:35.109 CCcam: remote ecm -> 192.168.1.1:12000 0x1802(0x000)
16:18:35.620 CCcam: remote ecm <- 192.168.1.1:12000 ok (took -nan seconds)
16:18:35.625 CCcam: cam[0] ecm odd ok caid:0x1802 id:0x0 pid:0x441 TV ............................

Display More

hi
could you please be more specific ?
i have the same issue that you ...
could you post the symlink creation ? command ? tnk s

Hi
Is possible to change my tuner from DVBS to DVBS2 on DM600Pvr ?

Tank s

Hi
any chance anyone know one image without enigma just the lnx to transform my DM600 in one NFS server and svn since i could not get HD channels or dvbS2 on it ?
tank s

Quote from yugi

hi
I would like to add some features to some keys in my remote ...

since i change my image I have lost the Buttons P+ and P- but i still have the functions but in other keys ....

I would like to fix this bad layout attribute and would like to ask to the people that could help where did I find the config files for that ...

tank s

Display More

for that with the same problem ..

/usr/share/enigma2/keymap.xml

SOLVED !!

First try :

File Type: zip hd800se_bootloader_04-04-2012.zip

and after this update with the image that you intend ..
if you still have bad result may be you got a problem with that image ....

hi
I would like to add some features to some keys in my remote ...

since i change my image I have lost the Buttons P+ and P- but i still have the functions but in other keys ....

I would like to fix this bad layout attribute and would like to ask to the people that could help where did I find the config files for that ...

tank s

Hi
i would like to disable clock and the power LED in the front panel on my GB800SE when the receiver is in standby..

its a very bright light to have all night in the room,....

I use OpenRsi image but i think that is not relevant for now ...

Anyone could give me a tip where are locate the files for that ...

I know that in GB800UE you can disable and change the contrast ... but in 800SE that same functions do not work...

Tank s

Hi anyone could give me a tip where to find the necessary material to install enigma2 on this decoder ?
if possible ?

Tank s

Quote from pheonix

It's built into the ViX image manager so not a plugin, however any member of the OE-Alliance can take this code and use it in their images too. There is a tutorial on this forum showing how to use this feature and ill update that soon to reflect the new updates etc.

Sent from my iPad using Tapatalk HD

Any chance you point me to that tutorial ...please ...