Posts by fogonero

  • AZ HD Multicas

    RTi Enigma 2 Core v1.3 Full Install by alonzo
    As of November 2011 I think is pretty good for AzBox HD, Enigma2 below RTi share to 1.3 Full installation files.


    I was prepared enigma2-plugins-Alonzo-fullkurulum_RTi-1.3_mipsel.ipk snap-in, first AzBox HD and Pro-HD interfaces AzConcinnity comes to the fore. These two interfaces and other interface is available in two fonts of all Turkish characters corrected the problem.


    Other add-ons, plugins are almost indispensable;
    CCcam
    CCcam info
    nStreamPlayer (for IPTV)
    Weather Plugin (add cities to the weather, go to Menu> Use the green buttons.)
    WebMedia
    N eyGüncelleme
    VLC Video Player (PC AzBox'ta videos to play in)
    such as plug-ins.


    All files with the extension ipk to / tmp directory after copying ipkg install - force-overwrite / tmp / *. ipk install command.


    Important: During installation, please wait until the Setup Complete message.


    After installation, the various images;


    Alonzo Full Plugins


    NOTE: After installing the add-ons will be installed first RTi 1.3










    add firm:
    Multiupload.com - upload your files to multiple file hosting sites!

  • Card in Smargo gets no ecm-no entitlements

    look at the dmseg, if the USB is OK. As I put it up.
    if so, you have to look at something in your setup that is wrong. oscam eye that many people can not read your card inserted in a Smargo. CCcam try and go only with ruling out possible problems.


    I put a comment BH drivers coders @angelof***1980:


    Quote

    Very strange.
    My smargo working properly after enabling their kernel drivers into Blue Panel.

  • Card in Smargo gets no ecm-no entitlements


    dmesg will have to leave something like this:


    smargo OK:

    Code
    usb 1-2: new full speed USB device using uhci_hcd and address 3
ftdi_sio 1-2:1.0: FTDI USB Serial Device converter detected
drivers/usb/serial/ftdi_sio.c: Detected FT232BM
usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0


    to see if this helps you:


    Driver smargo for all OE 1.6 Images


    Installation :
    - Copy all the files in the TMP folder via ftp
    - Connect the reader PCSC before installation


    Install the Image:
    - Tastoverde, yellow key, manual install Ipk packages (install them one at a time starting from the file
    1 to 8 in the list appear in reverse)
    - After installation is complete exit
    bh install select packages and install the only file that appears
    - Restart the Vudu


    Installing from telnet:
    - Navigate to the folder tmp cd / tmp
    - Enter the command: ipkg install *. ipk
    - Image by green button yellow button to select install package and install bh.tgz
    - Restart the Vudu


    Check post-installation:
    - Login via telnet or ssh
    - Type the following commands:



    ps aux | grep hald
    ps aux | grep pcscd


    if we have the answers


    /usr/sbin/hald
    /usr/sbin/pcscd


    the installation was successful and the reader is ready to use.
    Automaat will restart the daemon is restarted.



    luck.....

  • Gemini3 Wizard!...

    Gemini3 0.40-r3
    We recommend a current release or ICVS image.
    Who should use a different image in case of problems please contact the relevant people.
    Most functions can be found in the Gemini-Wiki.
    Gemini-Wiki
    How do you get the Gemini3 on his box is here.


    Function Buttons:
    * Plug the Gemini Blue blue panel
    * The remaining buttons can be freely assigned with our Quick button function


    New:
    * Internal changes to deal with loopback devices to be able (to be used for a new plugin)
    * Minor changes for Images 3.2


    Fixes and updates:
    * Language and translations. Thanks to all who keep sending us your changes.


    Important:
    * This is the final version will be based on Python 2.6.4. Future versions require Python 2.6.7. Say it must be an update of Python, or it must be a "newer" image will be used.


    Attention to Skinner:
    * Icon for loopback device / container files, the name "dev_loop.png"


    Extras:
    * Addon and Plugin Server
    * Cryptinfos the sender (assuming efficient GeminiPlugin Skin)
    * Manager to manage many daemons / Server (BP-> daemon)
    * Visual improvements such as HD-Skin, additional icons (GeminiPlugin ready skins can be recharged via the BP.)
    * Manager for formatting, setting up or integration of devices (BP-> Device Manager)
    * Own apps for example Dreamnetcast, eTorrent, NFS server, just to name a few
    * Detailed information about your Dreambox (BP-> Information)
    * EPG search (BP -> Extensions -> EPG search)
    * File-Manager, a lot of formats, regardless of whether images, footage, Torrents, scripts or DVDs (BP-> File Manager)


    Important:
    If the Gemini3 been updated, please always start new Enigma.
    Anyone who installs the plugin or NFS GeminiTools / updated, please start the new box.


    It is recommended picons to outsource EPG-Cache-Cache and the Gemini on a medium and not to leave it in Flash.


    User with the 7025 please select the G3 wizard for easy installation, storage is otherwise scarce.
    In the 7025 FlasExpander should be used.


    This plugin does not contain any keys or softcams.
    Backups or other modified Images are not
    and we will not be supported!

  • New PB-E2 VX Beta Image to test: v. 3.3.0


    New PB-E2 VX Beta Image to test: v. 3.3.0
    Power-Board Enigma 2 VX
    - public beta 3.3.0 vom 24.10.2011
    * based on RTi-core thx to the_ripper and all others


    - Power-Board-Center
    - one-key HD Skin thx to ravadi


    - backup-Manager, addon-Management, spaceviewer, crypt-Display, ... uvm.


    Newly listed:
    Flash Expander - the possibility of plugins and skins to outsource USB or CF (enlarged DOM)
    Camdinstaller - Allows Camd be installed - the Oscam also have the option to install them as stand-alone Camd or as an adjunct to other cam


    Included in this post is Stibbich's fstab file, which is something he keeps mentioning, as something that is not quite right with RTi Images, so compare this one with the one you will find in /etc/fstab, guys and use your common sense... or forums, whichever comes first...


    Download here:


    Index of /images


    I use AZUp to flash the rec... Say NO to EXT4, while doing it (untick that option!)!!!

  • OpenBox S9/S10 Firmware Tool by MST Latest Version

    OpenBox S9/S10 Firmware Tool 0.3 by MST
    This tool allows you to:
    - analyze Openbox S9/S10 firmware file (*.abs)
    - extract channel list to TP_PROG.dbs file (so you can extract list from .abs edited with SetEditHD100 tool)
    - preview, extract and replace background logo file (Back_logo.m2v)
    - preview, extract and replace boot logo file (Boot_logo.m2v) (preview is not working for firmwares with non pure m2v format boot logo)
    - check block's CRC and fix it
    - extract and replace whole blocks and blocks's data only


    Things that tool cannot do, but maybe be able to do in future:
    - decrypt maincode, for example to get firmware release date
    - preview boot logo for some firmwares with non pure m2v format


    Enjoy,
    MST

  • Power Board PB-Enigma II VX-Ferrari Ferrari for dm8000

    Power Board PB-Enigma II VX-Ferrari Ferrari for dm8000
    Release 2011-10-18




    Besides the familiar stuff is still an opportunity to come to install Camd by hand.
    When installing Oscam can even choose whether they want a stand-alone or in addition to Camd another Camd (eg CCcam).


    Furthermore, some mistakes have been corrected, eg The swap is now available after a restart,
    NFS and Samba servers can now be installed via browser addon etc.


    Important: Neuflashen is mandatory!



    Please note the latest version of SSL - SSL83F

    DOWNLOAD


    if I'm wrong please correct me of subforum.


    Thank you.

  • Tutorial AzBox How install Enigma2 Plugin Softcampanel.

    AzBox How install Enigma2 Plugin Softcampanel thx totox69


    '' Open file enigma2-plugin-extensions-softcampanel_0.1_mipsel.rar ... & unzip on Your PC ---> enigma2-plugin-extensions-softcampanel_0.1_mipsel.ipk



    With FTP:
    a - Open a sw FTP--->AZBox copy the folder unzipped file.ipk ... into the directory /tmp ...


    make attribute 755 your file.ipk ...


    b - If in Your sistem You have already installed the plugin User Scripts Menu , You only have to push for long time the BLUE button and in the options to select "install ipks from /tmp or /media/hdd", after..select file.ipk You want to install ... finally reboot Your AZBox!


    or


    With TELNET:
    Open Telnet ---> AZBox and write:



    cd /tmp
    ipkg install nome_file.ipk


    reboot
    Remembering ... if in /tmp there is only one file.ipk, is possible to use jolly (wildcard) example:


    ipkg install *.ipk




    Uploaded with ImageShack.us

  • BlackHole Vu+ Duo v. 1.6.6 Full Motor BackUP By Ferret

    BlackHole Vu+ Duo v. 1.6.6 Full Motor BackUP By Ferret




    Image Based On BlackHole Vu+ Duo v. 1.6.6



    Mods



    Smargo activated in kernel.



    CCcam nan ecm fix applied.

    EMUS added


    Mgcamd 1.37 configured just add keys.


    CCcam 2.2.1


    CCcam 2.1.3


    Oscam5965+CCcam213


    Scam 3.60


    Plugins/Addons



    CCcam Info 1.3


    Cool Mans TV Guide Setup to work with EPGs Configured.
    Picon Path /media/usb/picons




    Channel Settings



    Catseye Full Motor 15/10/11



    EPG's Setup



    Providing you have a mounted USB pen drive the following EPG's are setup. If you dont have a pen drive disable the scheduled downloads on the EPG panel. Insert your USB pen in slot below ethernet port. Mapped to /media/usb



    Satmate Sky Italia



    Satmate Sky UK



    Enjoy


    DOWNLOAD USB
    DOWNLOAD NFI

  • iDreamX (Mac OSX) for Enigma1 & Enigma2 receivers

    •Bouquet Editor
    •FTP Client
    •Telnet Client
    •Screenshots
    •Streaming TV, Radio and Movies to Mac
    •Streaming TV, Radio, Movies, iSight, Screen and A/V Files to Network (Internet)
    •EPG & Timer Events
    •and much more
    WHAT'S NEW


    Version 2.6.0.0b:
    New feature: stream tv, radio, movies, iSight, screen and audio/video files to your iPhone, iPad, iPod Touch, Android or Symbian device.


    REQUIREMENTS
    PPC / Intel, Mac OS X 10.5.8 or later, VLC v1.1.5 or newer, Satellite or Cable Box with Enigma1 or Enigma2, Like: Dreambox, VU+, Kathrein, Topfield e.t.c.




    MEGAUPLOAD - The leading online storage and file delivery service

  • Easy Blind Scan

    4.0 beta 0 [11 Oct, 2011]
    Changelog: