Posts by codar

Try another receiver if you have one handy. It needs to be a dvb-s2 (hi def) though.
If it works, that will eliminate your dish, lnb etc.

I have a foxsat 500 hdr, lovely freesat box. There is a patched firmware for it, "raydon's Media and File Server Bundle for the Humax FoxsatHDR" but i don't know if it enables any emu as i haven't gotten around to installing it.
Dunno if i'm supposed to link.
This is the description with the file.

"(1) A fully functioning web interface for the Foxsat HDR.

(2) A package management system with web based repository for the downloading and updating of applications.
This can be accessed both from the web interface and from the command line.

(3) A service management system to display status of custom applications, start or stop them, and disable/enable boot-time autostart.
Again, this is accessible from the web interface and the command line.

The file named 'FOXSAT-HDR_upgrade.hdf' is the firmware upgrade which provides the platform on which custom application software
packages can then be installed. It also provides the means to start these custom applications automatically at boot time. "

Thanks nano but I'm in a saorview blackspot. Ariva does the job for now, will have to look into a new twin tuner receiver. Any recommendations? (needs to be able for saorsat)

Motor is a nice job and gives loads of flexibility but if you know what sats you want and have more than one receiver, etc then google visiosat bisat. Trying to get permission for one from mrs kitchen myself.

I have one pointing at hotbird at 13deg with no problems, I'm in south west.

I think the problem is that the tuner can't handle this type of lnbf or its something that i'm doing wrong (hopefully) or my tuner is damaged.. I don't think it has anything to do with the image.

Sorry fasa, i don't understand uour question.
Przepraszamy FASA nie rozumiem pytanie. (google translate)

Best of luck fionncorp, i spent the best part of the morning trying to receive saorsat with no luck.
First of all, i connected my ariva to the dish and picked up saorsat with no difficulty.
I flashed hyperion to my nbox , connected both feeds from lnb to nbox, had tuner 1 set up as simple with no disqec enabled and tuner 2 equal to tuner one and tried scanning but no signal to be found. Tried both dvd-s and dvd-s2 on all fec variations.
The ariva is picking them up on a different frequency than advertised on boards.ie. Freq 11015, pol vertical, symbol 24991 (advertised as freq 10765, symbol 25000, pol vertical, fec 1/2)with blind scan on ariva. Tried both frequencies and also the one listed on lyngsat (freq 20185, pol circular left, qpsk, fec 1/2 symbol 24995) I cannot see a blind scan option on the nbox.
Let me know how you get on , maybe i'm missing something stupid.

Its looking like that alright. I'll install hyperion and try again but i don't hold out much hope as it is probably hardware issue.
Will update thread with the outcome.

Hello,
I have an nbox twin tuner 5800sx and am looking to pull in saorsat on eutelsat Ka sat 9.0deg east.
I can receive eutelsat 9 with a ku lnbf with no difficulty but when I change out my lnbf for the ka type lnbf (inverto), I can get no signal. The strange thing is, if i connect up my cheaper ariva 150 combo to the ka lnbf, it will pull in saorsat perfectly.
I am running Nebula zero on the nbox and am wondering if it is a problem with the image, settings or a hardware issue with this type of lnbf and receiver. I have tried to manually search using the saorsat settings( Freq 10765, symbol 25000,Polar vertical, fec 1/2)and also lyngsats settings (freq 20185. sym24995, polar circular left, fec 1/2 ,qpsk) with no luck.I know this question will only apply to a very small number of members but any help would be greatly appreciated. My next step is to upgrade the image to hyperion but am hesitant to do this as i never had a problem with nebula zero.

works a treat, thanks

Nice one to know, cheers

About as good as I am at setting up oscam.

Oh, and I thought i might have made just a small error.
I'll try those settings tomorrow and let you know how i get on.
Cheers

Hello.
Just got oscam working on nbox using a cline but its jittery.
Have i messed up some setting in the config.
I'm using oscam 3527 but jittery in 4123, 4158 and 3144 also which leads me to believe its my settings.
Thanks.

oscam.server

########## oscam.server ###########

[reader]
label = reader_up
enable = 0
protocol = internal
device = /dev/sci1
services =
caid =
detect = cd
mhz = 500
cardmhz = 357
ident =
group = 1
emmcache = 1,2,3
lb_weight = 100

[reader]
label = reader_down
enable = 0
protocol = internal
device = /dev/sci0
services =
caid =
detect = cd
mhz = 500
cardmhz = 357
ident =
group = 2
emmcache = 1,2,3
lb_weight = 100

[reader]
label = remote
enable = 1
protocol = cccam
key = 0102030405060708091011121314
device = ***.***.***,***
account = ****,****
group = 3
fallback = 1

oscam user

# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #3527
# Read more: gmc.to - Informationen zum Thema satellite tv.

[account]
user = local
pwd = local
disabled = 0
expdate =
group = 1,2,3,4
hostname =
uniq = 0
sleep = 0
monlevel = 2
services =
caid =
betatunnel =
ident =
chid =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

oscam config

# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #3527
# Read more: gmc.to - Informationen zum Thema satellite tv.

[global]
pidfile = /tmp/oscam.pid
logfile = /dev/tty
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -10
serialreadertimeout = 1500
maxlogsize = 32
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = local
pmt_mode = 0

[webif]
httpport = 8888
httpuser = root
httppwd = pkteam
httprefresh = 0
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 0
httpreadonly = 0

oscam provid

#
# provider table
#
# format: <caid>:<provid>|<provider>|<satellite>|<language>

0100:000068|CTFRA+|Hot Bird 13.0E|Polish
1803:000000|CYFROWY POLSAT|Hot Bird 13.0E|Polish
0B00:000000|TVN|Hot Bird 13.0E|Polish

Hi
Image is nebula zero and only ch number.
Ch name would be nice.

Hello,
Is it possible to have current channel displayed on front panel of receiver?
Thanks

Hi gavin, I sent you a PM about it.

donedeal.ie

Finally managed to change to multi boot and then installed nebula zero (thanks nano). Working great but had the 4 yr old daughter beside me when it booted initially and the logo scared the s**t out of her. I have been also successful in updating the epg ang getting both tuners running on 28.2. Is it possible to use a diseqc switch for another satellite on one of the tuners? I am looking to pull in saorsat (eutalsat at 9deg east). I have a ka band lnb arriving soon. ( I am one of the 3% of the population who cannot receive saorview)
I would also like to set up an emu and from what i have read, oscam is the best for a twin tuner. Would this be correct?