Explanation here on why it's happening:
https://linuxsat-support.com/s…p/122882-Error-on-Solo-4K
It should be fixed soon
Posts by codar
-
-
Have a look in here:
https://linuxsat-support.com/f…php/1406-DM900-UHD-Images -
Remember to restart your receiver after installing the plugin, otherwise it won't find your server.
-
Probably need to change your tuner setup to point to 28.2 first.
It's normally in setup-service searching- tuner configuration. -
Duo2 has now gone to a family member.
I'll close this out. -
@ abarkie, pm sent.
-
P.m me a rough destination and I'll see what it costs.
- - - Updated - - -
Postage is expensive, go to €260 and we have a deal.
-
What type / make of tuner and onto what model of zgemma and image installed?
There are drivers on the image feeds but if your using a modded / patched image, they may cause more harm than good to your receiver.
Backup configs / image before trying them. -
If your getting interference from transmissions on the same channel, use a different channel on the modulator and tune your tv into that channel.
You shouldn't need the aerial feed for it to work, just need the rf out to your second tv.
Good installation videos here:https://www.youtube.com/watch?v=_q01Fb89tP4
https://www.youtube.com/watch?v=3BNhOFommKQ&feature=youtu.be -
Glad your sorted, I'll close this.
-
Try refitting the 3.5 jack to phono output lead, make sure the jack is plugged firmly/fully into the rear of the receiver (i don't have a tri-link but have found that if the jack isn't pushed fully home, you will get static across both channels when using external speakers)
- - - Updated - - -
Also, are you using the original 3.5 to rca lead that came with the receiver as some aftermarket ones differ (the length and spacing of the jack is sometimes longer/shorter which will end up in bad or no contact within the jack plug on the rear of your receiver).
-
Try inputting your port number starting with a 0 (zero), eg, port 1234.
Try entering it as 01234 it may work for you. -
Selling my duo2 (re-modelling and duo2 is just too big for planned new location, will be sorry to let it go to be honest)
Purchased from canthackit on 04/07/2015 For €300:
http://linuxsat-support.com/sh…d.php/86435-VU-Duo2/page2
Added a few extras since I purchased it :
Installed a 500gb 3.5" hdd, twin dvb-s/s2 tuner module and single dvb-C/T2 tuner module (originally came with 2 dvb-s2 single tuner modules)
Also included is another twin dvb-s2 tuner module , a single dvb-s2 module and a genuine vu solo2 remote (purchased remote as I found the original duo2 remote was not as responsive as I'd like it to be)
It is in very good condition, normal wear n tear, box and manuals, only a small scratch on top of the casing (photo included), running perfectly and never missed a beat in my ownership.
Looking for €260 euro + postage for the lot.
Current configuration as new (dual dvb-s2 + single dvb-t2/c tuners and 500gb hdd installed) will cost you £338 pounds/€400 euro from site sponsor (although they will fit a 2.5" hdd)
I am willing to configure it to however the purchaser wants, tuner wise, and will try to sell off the extra tuners on their own but I will not sell any tuners until I've the receiver sold.
The additional tuners are also suitable for the vu uno, ultimo and solo se v2.I am away for the next few days, won't be able to ship it till next Tuesday at the earliest.
-
Humax Foxsat HDR for sale.
Looking for €60 + postage.
500gb hdd fitted.
Two remotes (one genuine, one spurious)
Great Freesat Receiver.
f9779.jpg -
Garage clear-out, need homes for these items.
Any offer/swap etc considered.
Let me know what your interested in, rough location for postage and I'll test it and send it out (postage at your expense obviously)
The odd one out in the picture is an old ferguson ariva HD-combo receiver (Right hand side, second one from top, can't find the remote at the moment for it though)
I think those that should have hdd's, do still have them (I've not removed them anyway)
Two sly plus+ box's missing remotes at time of posting. (I may come across them when doing more tidying up, will be next week by the time I get back to it though) -
Tough call really, this has most of what you require except a third tuner
http://www.world-of-satellite.…se-m2-plus-twin-satelliteAnother option would be the edision os mega and use your smartphone or tablet as a remote, loads of enigma remote apps out there, no need for ir extender.
It has 2 dvb-s2 tuners and a hybrid multi 3rd tuner (can be configured for dvb-s2 or dvb-c/t/t2, same tuner as os mini+ receiver)
http://www.world-of-satellite.…on/edision-os-mega-osmega -
Which edision model do you have?
The os-mini is supplied with a 3.5 jack to phono output lead (red white and yellow)
This lead along with a scart adaptor should be all that is needed to connect to your tri-link.
87c3b55b814.jpgIt can be got from any electronics store (currys/maplin) or auction sites, shouldn't cost anything more than €5.
-
-
It may be a port conflict as your cccam sharing port on solo4k and your server are both 12000 (according to your posted configs)
Try changing the cccam port entry on solo4k to something other than 12000 (if that's the cccam port you use on your server) and restart oscam:Quote[cccam]
port = 12000
nodeid = 0558244110821388
version = 2.1.3
reshare = 1QuoteDisplay More
oscam.server
reader]
label = 192.168.1.100
protocol = cccam
device = 192.168.1.100,12000
user = canthackit
password = support
inactivitytimeout = 30
group = 1
cccversion = 2.1.2
cccmaxhops = 1
ccckeepalive = 1Is your webif port the same on both server and solo4k also, if so, try changing one.
-
My mistake, it was an unofficial version release and has been removed.
