Don't think oscam supports your card, it's not on the cards list:
Code
http://www.streamboard.tv/oscam/wiki/CardsListPosts by codar
-
-
Have a read here from 1st post.
Sky 0960: All channels on Sky Atlantic transponder went black (rejected ECMs)
No fix yet.
-
On remote, press up then green (satellite list), scroll to required satellite, press ok.
Scroll to desired channel you wish to add, don't select it, just leave it highlighted, press menu and select "add to bouquet" option, and choose the bouquet you'd like to add the highlighted channel to.
If your replacing a non working channel, you may be better off deleting that channels from the bouquet first, before adding the alternative working one, pressing "menu" while in the bouquet will give you this option.
To relocate your newly added channel within a bouquet, while in the bouquet , press your menu button again and select move mode, scroll to the channel you want to move within the bouquet, press "ok" (channel font should turn red) and now you can move it up or down within the bouquet, pressing menu again will give you the option to exit move mode.
Note: If your using abm and run it, have scheduled a daily, weekly scan, it will undo all of your changes though.
-
-
Quote
I haven't seen anyone posting yet that the red card from their sky q box works for sharing etc...
Reported working here on post #4
Quote -
Amazon also listing them:
Codehttps://www.amazon.co.uk/dp/7555564149/ref=sr_1_1?s=electronics&ie=UTF8&qid=1490733607&sr=1-1&keywords=sky+q+hybrid+lnb -
Found 2 sellers on fleabay
Codehttp://www.ebay.ie/itm/Hybrid-LNB-6-ports-for-Q-Boxes-free-to-air-from-the-same-dish-/182506772545?hash=item2a7e405841:g:CocAAOSw4CFYrd9i http://www.ebay.ie/itm/Hybrid-6-way-LNB-Freesat-Plus-and-other-HD-boxes-/261237929842?hash=item3cd2fe7772:g:e3oAAOSwax5Y1Q5I -
Vhannibal has a recent one (3rd march), although combined with other sats but dreamboxedit/dreamset should sort it for you.
https://linuxsat-support.com/s…nnibal-E1-settings/page12 -
[MENTION=237383]Ladder[/MENTION], I've a combo model os-mini with hdd attached at rear.
Epg on hdd and picons on flash without any issue.
Has basic plugins installed as well, and still loads of free flash.
All runs smooth.
a95812caa0ed44aabf4184529.jpg -
I'll have time later tonight around 8 or 9 and can have a look for you via teamviewer, if your interested, pm me.
-
Which protocol are you using for sharing on vu?
Have you opened up a port on your router for your pi to share your card?
Your configs from both will help to find your fault (hash out sensitive info) -
This thread may help you:
https://linuxsat-support.com/s…ighlight=splash+screen+vu -
I used cifs to test it on client box (your vu zero) and it worked ok.
I didn't alter any settings on my receiver with the on-board hdd (your solo2) -
From your crontab file, looks like your using oscam-cccam setup.
If so, cccam will also stop at 06:57
You may want to hash/comment out that entry also:Quote57 06 * * * root killall cccam_2.1.3
You could probably hash out the following also, if you have the oscam/cccam kill commands hashed:
Quote58 06 * * * root /usr/local/bin/oscam -b
59 06 * * * root /usr/local/bin/cccam_2.1.3These are just start commands and are not needed as you've prevented the stop commands from being executed previously.
-
Try flashing on original factory image first (or re-flashing the blackhole)
Image may have gotten corrupted upon flashing or extracting.
Factory images are here:
https://linuxsat-support.com/f…O-Original-Factory-Images -
Add your hdd on your solo2 as a network mountpoint
On Vix this is how (other images are probably similar):
Menu-setup-system-network-mounts setup-network browser.
This should scan your network and find all hdd's attached.
Select your solo2's hdd (no need to enter name/passwd unless you want to) , then scroll down to the hdd (may ask for name/pass again but no need, up to you)
In here you'll have the options of mounting the solo2's hdd on boot, as needed etc, also you will have the option of using it as a hdd replacement, etc.
Once mounted, to view its contents, go into your pvr/hdd/recordings, hit yellow button for location and scroll to your solo2's hdd.
Your screen should then populate with the hdd's contents.
If you want to timeshift using it, you may need to go into your zero's timeshift settings to activate it(never tried this myself though but viewing recordings/ media on hdd works well)
Let us know if timeshift is successful for you (if you use it as a hdd replacement). -
[MENTION=101456]mrbirdseye[/MENTION], It should work in openatv, it's just not installed in the image by default.
You need to download crossepg from the image feeds (menu/plugins, green to download and its in the system plugins I think, or extensions. ).
I had it running on my old duo2 with atv5.3 -
Can you receive this frequency?
803dded43d394567b4043.jpgIts the frequency needed for epg data.
Check it in:
Menu > Setup > Service Searching > Signal/Sat Finder
Taken from this thread:
https://linuxsat-support.com/showthread.php?t=101675&page=4Also, what way do you have your tuners setup.
If you've set up both tuners but only one cable connected to a tuner, tuner lock is normally experienced (this was the case on normal dvb-s2 tuners, I don't have a 4k receiver or fbc tuners so not sure if it applies)
If both tuners are set up with only one cable attached, try disabling the tuner without the cable and run crossepg again. -
It could be in /etc/crontab
will look something like this:Quote0 07 * * * root /sbin/reboot
Just comment it out (put a # in front of it to deactivate it or change/delete it)
-
There is a problem at the moment with the linuxsat panel, should be fixed soon.
Try finding dreamplex on the HD freaks image feeds, normally you go to plugins and green button to download (not familiar with hd freaks though so not sure if it is in their feeds).
