If you use a services file, then it maybe best to keep on top of it alright, to help keep your services file up to date
Otherwise you may be blocking channels (or allowing them) to your reader(s)
Another plus is to see what channels your card is being hit for in the oscam webif
Posts by codar
-
-
Have a look in your configs to see if there is a srvid.bak file, if so, delete it along with the present srvid file.
Then re-load a new srvid file and restart oscam/server.
Hopefully it should rectify your problem.
You can get your required srvid file from here:Quote -
Then you'll need a genuine subscription or a share from someone that has one.
Have a read here on the basics:
http://linuxsat-support.com/showthread.php?t=90
The rules are here:
http://linuxsat-support.com/misc.php?do=vsarules -
-
On the navbar ,top of page, click where you see "image/firmware" and select your image team (your currently on openvix) followed by your receiver's make and model.
-
Quote
is there away to change my cline to an n
Not really, it's set by the peer who gave you the line.
You could try oscam or mgcamd (mgcamd may not work though as it depends also on how the server is setup)Quotei have a green flashing light where the red is when i record on the bottom bar
That's to inform you that there's an update available for your image. -
From the telegraph
QuoteCarl Frampton v Scott Quigg: WBA/IBF world super-bantamweight titles
The first fight of the undercard begins at 6pm, with the main event likely to start at around 10.45pm. -
This guide will help explain how crontab is configured:
http://linuxsat-support.com/showthread.php?t=14263&highlight=crontab
I would think anything to do with cccam can be removed if your not running it on your server.Quotealso reading "thatfellows" tuts he mentions he restarts oscam every night and reboots his server everyday, but ive also read peeps leave thereson 24/7 what advantages/dis advantages is there to rebooting every night or leaving on 24/7
Advantages may include clearing tmp logs etc..
Disadvantages maybe mixing up card readers (if more than one of the same type are connected although it is possible to lock them to specific usb ports)
http://linuxsat-support.com/showthread.php?t=3663&highlight=udev+rules -
You'll need to install a patched version of the firmware.
It can be found here:
http://linuxsat-support.com/showthread.php?t=96186
Make sure you only flash the correct firmware for your model otherwise you'll get "ASH" error appear on display and receiver will become unusable.
A tutorial on how to upgrade can be found here: (is written for the 102E but procedure is the same)
http://linuxsat-support.com/showthread.php?t=13204
This will help inputting your line details:
http://linuxsat-support.com/showthread.php?t=19244I'd also recommend backing up your channel list before flashing as it will erase them.
Insert usb.
Menu-tools-upgrade by USB and choose "dump"
Hit "start"
That creates a dumpfile/backup.abs file on usb stick.Then to upload again (after updating firmware),
Menu-tools-upgrade by USB and choose "userdb"
Hit start.
Receiver should reboot with your original channel list loaded, all going well. -
The flashing guide/tutorial is here:
http://linuxsat-support.com/showthread.php?t=82451 -
Red coloured are the cards without reshare level as far as I'm aware. (connection through a connection etc)
You could try changing your cccmaxhops to avail of more re-share but anything above 2 or 3 may be unstable.
The other side may also have to allow this for it to work. -
-
Works ok when you just press the "arrow up" button (vixbmc 1080 confluence skin, combo receiver)
It will not however change the minitv pic as you scroll down your bouquet list, only change epg info for the channell you've highlighted.- - - Updated - - -
Quotehi zigpip how u install this backup in the 2/2 loading image blue skin reboot the box stay on boot put normal image not prob ???
When screen turns blue, power down the receiver and remove the usb containing the image.
Then power on the receiver and it should start normally, it does so on the combo version. -
Try re-flashing it again with another image or alternative image version (may have had a bad flash or corrupted image)
-
Quote
Can you tell me where the settting is to get the mini screen and the now and next epg in your screenshot above.. I have the channel list in the left screen and a blank right screen. Good work!!
You need to download the epg.
Better off to mount a usb stick to store it on (not recommended to use internal flash.)
Plugin usb.
Then, on remote,
Menu-setup-system-epg-settings and scroll right on "EPG location" to select your usb/ flash drive.
Green button to save.
Exit out of everything then press blue button and scroll down to "cross epg downloader"
Press ok and it should download the epg.Then, select a channel and press up button and the screen + epg data should appear. (from what I remember)
-
First thing to note, if your looking for support, I'd advise you to leave out the "thanks required" option in order to read it, as it will put people off helping you from the outset.
These receivers are pretty much on the same difficulty level to set up as a vu+ receiver. (they're all enigma2 receivers)
The best ones to purchase are the newer released ones as they perform faster and have an improved remote.
There are three different varieties, H.S (single sat tuner) H.2S (twin sat tuner) and H.2H ( terrestrial and sat tuner) -
Image attached below:
-
I'd have a read of the vix manual if I were you, It'll make life easier if your trying to setup from scratch.
I've attached it below.Quotefrom what i seen i have downloaded a ipk file which should put autobouquet on
If it is a vix image (openvix) you can skip installing autobouquets ipk as it comes pre-installed on all the latest images from openvix.
If the going is a bit too much, you could load a backup image (preconfigured image)
Vu duo backup images can be found here: (no recent backups of openvix for your duo I'm afraid though)
http://linuxsat-support.com/forumdisplay.php?f=234
Have no experience with TurkVod I'm afraid but go with oe2.0 (oe1.6 normally means enigma1 and oe2.0 = enigma2 as far as I'm aware) -
After flashing, it sticks on first boot.
Just power off, remove your usb stick and restart, all should be ok then. -
Quote
codar m8,did you see if your remote works with the duo2?
Didn't get a chance but had a quick look in the setup and duo2 is listed as supported.
