Display MoreYour usb stick is mounted as /media/hdd/ not usb but thats no problem if you dont plan to attach a real HDD to your STB
just opload your picons to /media/hdd/picon folder and all should work just fine. If folder picon dont exist just create one your self.
Ditt usb minne har monterats som Hårddisk det görs automatisk när du bara har en extern lagrings enhet.
Det i sej är inget problem,bara om du tänkt att sätta in en riktig hårddisk i framtiden.
Du kan ladda up dina picons til mappen /media/usb/picon så funkar allt lika bra. Finns inte mappen så skapat du den bara själv.
Posts by knislinge2000
-
-
I use df -Th it shows the filesystem too.
root@gbue4k:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 975.9M 584.3M 324.4M 64% /
devtmpfs 434.3M 4.0K 434.3M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
/dev/mmcblk0p1 3.0M 12.0K 3.0M 0% /boot
tmpfs 442.5M 188.0K 442.3M 0% /var/volatile
/dev/sda1 297.0G 46.9G 250.1G 16% /media/hdd
root@gbue4k:~# df -Th
Filesystem Type Size Used Available Use% Mounted on
/dev/root ext4 975.9M 584.3M 324.4M 64% /
devtmpfs devtmpfs 434.3M 4.0K 434.3M 0% /dev
tmpfs tmpfs 64.0K 0 64.0K 0% /media
/dev/mmcblk0p1 vfat 3.0M 12.0K 3.0M 0% /boot
tmpfs tmpfs 442.5M 188.0K 442.3M 0% /var/volatile
/dev/sda1 ext4 297.0G 46.9G 250.1G 16% /media/hdd
root@gbue4k:~#
-
You have to start from the beginning. Format your usb in Windows as FAT32. Then you must go to Storage - Initialize devices.
Click on this and choose ext4.When is process finish then you have option Mount -Unmount. Click on mount and choose
mount as media/usb.Then you connect with Filezilla and go to media/usb folder. Make new folder name "picon" and change
attributes to 755. Restart the box and now you must put picons in media/usb/picon folder.
Ok but USB is already installed so it means I can't go back to fat32 on this USB
-
you can highlight the failed transfers, then select "process queue".
or connect the usb to your windows laptop/pc > copy the picon folder to where it should be (hdd) > connect usb back into the box.
Windows does not recognize a USB that is mounted in an enigma2 receiver it is no longer fat32 formatted is there any solution to that?
-
Have mounted a 32gB USB and want to put my picons on this.Ttried to create a folder named picon on it but when i try to put my picon in that folder i get notified that it is not enough with memory !!
What am I doing wrong?
:unhappy:
What image are you using?
Most of all image has a plugin feed where you can download picons.
Go to that download section of your image and download any piconset named usb.
Does not matter for what satellite just choose one random or of cause the one for yours if they have one.
After installation reboot and open with ftp your media/usb to check your new picon folder :)
Upload your picons to that folder and all should work just great :thumbup:
I know that, but it's not for me. I receive satellites from 75E- 37.5W and therefore I pick up picons here
-
It almost work but some files failed :-(
-
This one?
The usb device is mounted as /media/hdd. So put the picon folder in hdd.
Which program is best to use?
vucc / DCC / Filezilla / Total commander?
-
This one?
-
Sorry that i not understand how i can Use the command df -h to find the mount point .
-
As I said in root /media there are 3 folders autofs, hdd and USB
Should I create a folder in USB called picon?
-
I do it in receiver and can see my USB in root/Media 3 folders -autofs,hdd and USB
here Ttried to create a new folder named picon.
Did not work at all9cbe73bb450.jpg
-
Have mounted a 32gB USB and want to put my picons on this.Ttried to create a folder named picon on it but when i try to put my picon in that folder i get notified that it is not enough with memory !!
What am I doing wrong?
:unhappy:
-
Can you tell me how i flash from HDD ?
-
Did a software update and waited at least half an hour for the box to restart but it did not happen now it does not want to start at all have tested to insert a USB with a new image but on the display it just says "starting" and nothing happens.
I access it with FTP but do not know if you can get it started via the network.
Help, what should I do???:crying::crying::crying::crying:
Has also downloaded new software from VU + but the box only reads my USB memory (Flashes) but it only says "starting" on the display
-
Did KodiLite work ok before ? When did this problem start ? Did you change to a new image ?
Yes it work before No not new image This is on my VU+ Solo2 on my Solo 4k it is ok Same image in both
-
What am I doing wrong? I put the * zip file in "temp" but kodilite crashes right away when I try to install it
Is it possible to zip it up and put it in a folder
Please post the crash log. Perhaps some error in the code.
It is a very bad crash i must reinstall my image on the box it goes in in a loop after i try to install kodilite
These crashes are not due to KodiLite. KodiLite is not mentioned in the logs.
Strange but if i not try to install kodilite 5.0 all works well as soon i install kodilite this happens
-
What am I doing wrong? I put the * zip file in "temp" but kodilite crashes right away when I try to install it
Is it possible to zip it up and put it in a folder
Please post the crash log. Perhaps some error in the code.
It is a very bad crash i must reinstall my image on the box it goes in in a loop after i try to install kodilite
-
What am I doing wrong? I put the * zip file in "temp" but kodilite crashes right away when I try to install it
Is it possible to zip it up and put it in a folder
-
Ok Thanks found them now :-)
-
Per la prossima volta (1) avvia KodiLite (2) Exit (3) Restart enigma (4) Test KodiLite.
I tuoi addon installati dovrebbero funzionare. Se qualcuno non funziona, o hai bisogno di nuovi addon, per favore chiedi qui. Saluti.
ciao pcd si può avere l'addon AdultTvE2. Grazie.
Please download from here :- KodiLite.v.5.0
Ok still this i cant find here
Jizzplanet
Madnesporn
MCadult
TAD