Posts by digi247

You have to set it up as 'Advanced' then Diseqc 1.2 LNB 1 scroll to the very end when it asks 'Use USALS for this sat' select yes and put in your USALS co-ordinates do this for every satellite you receive apart from when you get to 28.2° east set this as advanced again but as Diseqc 1.0 LNB 2 and that should be it, and please dont panic as you go along for each satellite in the advanced menu when selecting LNB 1 it should remember your previous save for LNB 1 and repeat it for all the other sats

You will have to put each one in as a reader in oscam, Just go to reader section on the Webif and add a new reader but for the protocol chosse CCcam and then fill in the user,pass,port,IP/DYDNS details

Quote from shirra

does anyone know if i update the satellite.xml file, maybe it will work???

There are no Sat.xml files to edit within the DrHD its a closed source receiver

Quote from kiwiz

i dont know that what i head people talking about iptv hbbtv. pressed blue cant se hbbtv plugin.

As i asked previously what receiver do you own a Solo or a Solo2 as the standard Solo cannot run hbbtv.

hbbtv is only available on satellites such as 19.2 east etc.. and not on 28.2 east, if you have the Solo2 try a channel on 19.2 east and in the bottom left hand corner you will see the hbbtv light green if the channel you are on is compatible

According to your post your using the Solo which is not HBBTV compatible due to insufficient memory, If you have the Solo2 then yes it works fine

Theres loads of channel list available for the Blade, TM5402HD and Clarke Tech 5000 as they all use the same .cndf file structure so plenty to choose from all over the place

Quote from hopper

Will do

Do you know if you delete all the transponders from the list what is the best way to get them back from scratch.
To me it looks like the tunes is not strong enough as it's not picking up some of the transponders. ?

To me it looks like a problem with either your box or your dish setup, as the channel list you posted and i tried as well as my mate you said premier HD was not showing it worked perfectly on mine thats all i can go off

Quote from hopper

How come when I delete all channels and then do a factory reset or even re flash with memory stick
I still have my full channel list and Favorites
This is driving me mad why I cannot remove all my lists
I think this is why I cannot find some channels.
Anyone know how to return this unit to factory setting - I think it has something to do with the default DB as this is where I uploaded my channel list to.

to delete all channels got to the channel editor menu and select delete channels then press INFO button to delete all channels it asks for password enter password then it should delete, now here is the problem it leaves certain ones in so you have to go back and do the same thing again until when you finally delete everything when you come out of the menu you are greeted with the planet picture and the words No Channels this means everything has been wiped.

It took me 4 attempts to clear the whole lot then you can load the blade list and most important dont forget to set the tuner up again in the menu to 28.2° east

I had problems with the blade list until i did the delete 4 times

As i said it must be your setup i tried a number of channels and they all worked and so did my mate who has the F15.

why are you scanning a channel list that is already done for you when all the channels work.

Quote from keirllyan

hi difi247, thanks for the clarification. when I apply the firmware and press the green buttonin the Channel settings are nothing happens. Where exactly am I to press the green button to allow me to insert the cs information using the remote please?

You load the patched firmware set your box up again as it was with your channel settings and then when either on a FTA channel or Scrambled channel press the green button to enter the CS hidden menu and either enter details there manually with remote or download the CSinfo.txt via usb and enter the info on your PC and re-upload via usb

Quote from hopper

Will do

Thanks

also I have been trying to factory reset it but everytime I do it still has the channel files there I think I did something myself and loaded my channel list into the Default DB

Funny why I cannot reset everything

I have tried to auto scan and blind scan and still cannot find premier HD ?

i have attached my channel list
Thanks

Display More

No problems here Hopper tried this on my DrHD Grand triple and got a mate to try it on his DrHD F15 so i would assume its something to do with your setup.

6e9df2b4636a6dcda6fac.jpgffb6f4d350b7decb7cee28b2a.jpg

Quote from hopper

Thank

BTW I got the streaming software from the Strong website works great
Now if I could only see why my Blade channel list shows up some channels as bad or no signal
PS I will stick at it and see if I can get the 7 day EPG working
as you said they come from the same factory and at the price it would be worth sticking with it

again thanks and if you can point me to any other fourms or even test my channel file to see what might be wrong.

Upload your cndf channel list here with the problem ones and i will have a look on my DrHD Grand Triple

Quote from hopper

Hi

Point taken
I will spend a bit more time with it
BTW on the Russian site do you know when to find that software

Thanks

You would be better letting Google translate the whole web page for you, its not great but i have always found firmware and other tools without problem with the translation

I could only garnish this slight bit of information from the Russian manual on the D15 which states the following:

Excuse the Google Translate:

Quote

1) Do not forget before you connect to the computer, run the program STBDaemon
v303 (or higher) and select the folder for access.
2) Model D15 can view video from a folder on the network, bypassing the copy operation
video on a drive resivera.Kak rule, 720p video and plenty of speed below
Online 50Mbit/sec, 1080p video will need a broadband connection with at
data for at least 100Mbit/sec
3) The system has a limit of 40 characters in length of the folder name / file, otherwise
If long folder and file names ignogriruyutsya and not displayed.

Display More

Quote from keirllyan

Hello, when I try Module_002p-cccam-newcamd on D15, I get insuffiecient memory error message. The D15_105P installs fine but the Module does not. Any help would be appreciated.

Thanks

You dont need to load the 002 module on the D15 this is included within the patch the 002 module is for the older F15

Quote from hopper

After testing this unit for a day or two I feel it's no where close to the Blade 7000
Blade has a better menu and the EPG works
Also the ability to stream movies from PC to Blade is great
the playback or recorded footage is also no where close to the Blade

I also noticed I can tune in 11777 27500 v on the blade and my ***box and get 8010 for EPG
This cannot be tuned in on the DRHD ?

I have tried to contact DRHD on this but got no answer support is crap at present
The only site I can find for support is in Russian.

does anyone out there have any ideas on how to solve these problems above.

Thanks
PS I downloaded my Blade channel list and selected default DB now every time I do a factory reset it loads the Blade channel list
how do you remove this.

Display More

If you had preferred the old style blade menu then you would have been better buying the F15 as this is what the Blade is based on, with the F15 you had a choice of either the standard look ( Like a Blade ) which in my opinion looks awful anyway and the info bar is stretched halfway across the screen or you could load the HD firmware with the slicker looking Menu and info bar.

I am sorry i cannot help you with the EPG question as i do not use my box for general day to day viewing, but what i do know is the streaming software is available from the Russian support site but as everything and i learned the hard way you have to read how it works as i have done for the last year or so on the Russian support site, There is also an English section where you could get help there if needed.

How you can say support is crap is a little strong i think yes the main support site is russian but the D15 is only around 3 months old and already has had 5 firmware patches available for it comparing it to the blade which has only had 3 in over 12 months you tell me which is poorly supported. A quick math will give you the answer to that one.

Your recording and playback problem with footage is also a strange one, Take into account that the DrHD/Blade/TM5402HD are all made in the same Korean factory using identical parts so would also use near identical firmware so in practice they should all perform the same.

Regards

Quote from hopper

Sorry Shirra

Your wrong there you can send the info to the unit using a text file as I have five cline added to my unit it would take some time to type them all in.
I got that sorted now
But I have two problems
1. after uploading my CNDF channel list I noticed a good few channels show up as no or bad single - this works fine on the Blade (97% single)
2. What channel do you need to be on to populate the channel list for 7 days only getting now and next.

Thanks

Display More

When you say your getting 97% signal is this on the main screen with just the info bar present at the bottom

Quote from hopper

Sorry meant HD D15

Then the one i posted on the 8th of this month in the firmware thread is the latest version for the D15

Quote from hopper

Hi Digi247

Will this also work for the Dr. HD F15
Sorry just waiting for mine to arrive Friday want to have everything ready using a Blade 7000 at present.

It wont sorry they both use different patches, if you are struggling for the latest F15 patch i have them all, The D15 is the latest model the F15 has been around longer than the Blade 7000

Quote from hopper

Hi

Just to add I have also just ordered one of these units Dr.F15 I think it goes by been using the Blade 7000 for the last year GREAT box saw this one which is very alike but was told its faster and has more features.
I was adding the UK&IRELAND channel file onto Blades server but I'm not sure if this unit can pull that down.
The PC media stream software that I have for the Blade will that work for this unit.
Also the company said they will send me out the latest patched firmware for this unit I can post it here when it arrives.

Thanks

The Dr HD F15 is different from the title of this thread the Dr HD D15 be careful which patch you load as they are totally different and you would not want an expensive brick on your hands, The D15 is the latest Model

Upload via a USB Stick