Posts by dacorsa

Quote from saerdnast

Quote from dacorsa

Verify if works your page : emm_url = https://pastexxxxxxxxxxxxxRm

I have 4 Url´s and all works

If I open one of these URLs, the current one is displayed on all of them

Code

82708E0000000000D38.....................................................F21E6BA

in the first post Samur tells to use this name: Tivusat_183E

label                         = Tivusat_183E

Quote from saerdnast

Quote from sodex

saerdnast ; PASTORE ; u.a.

what does the "tivusat.sh" script have to do with the thread title here? This is about Oscam with http-emm support

Excuse me
Oscam by Samur is running on my server but it doesn't update.

[reader]

label = Tivusat

protocol = mouse

device = /dev/Tivusat

autospeed = 0

caid = 183E

rsakey = A92DA72Fxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

emm_url = https://pastexxxxxxxxxxxxxRm

emm_reload_minute = 5

fix07 = 0

detect = cd

nagra_read = 1

mhz = 368

cardmhz = 368

group = 4

emmcache = 0,1,2,0

blockemm-u = 1

saveemm-unknown = 1

saveemm-g = 1

cccreshare = 0

I always have to write the EMM on the card by hand

Display More

Verify if works your page : emm_url = https://pastexxxxxxxxxxxxxRm

run "which curl"

seems i have solved this problem:

for my system (decoder+card) i have to specify the following values:

autospeed = 0

mhz = 368

cardmhz = 368

the default value 357mhz not works.... now oscam-samur is reading the card !

thanks to all of you :)

This is the diff:

pasted-from-clipboard.png

I have 183E gold card of Tivusat

Quote from piterfree

hi, when it doesn't initialize it seems that you have to turn off or restart the decoder... and check if you have given 755 rights to all the Oscam files and the bin.

and made sure it is the right reader 0 or 1

Thanks Piter, i have reboot the decoder, but not solved the problem, yes bin and conf file have 755 permissions. I have Mutant HD514K and has only /dev/sci0

Quote from niosi

dacorsa

Post your configuration here and let's see if there are any imperfections in the compilation. Have you entered the RSAKEY correctly? Have you chosen the correct device?

Thanks niosi ,

if i start ncam read the card perfectly and my dec Mutant HD514K has only /dev/sci0, the problem is some version of oscam (samur and satlodge ecc ...)

Unix starttime: 1710229680
Starttime:      12.03.2024 08:48:00
Version:        oscam-1.20_svn-r11734-799
Compiler:       arm_cak7-icam-l2b_(samur)
Box type:       hd51 (generic)
PID:            2528
TempDir:        /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/
WebifPort:      2000

Web interface support:                   yes
LiveLog support:                         yes
jQuery support intern:                   yes
Touch interface support:                 no
SSL support:                             yes
DVB API support:                         yes
DVB API with AZBOX support:              no
DVB API with MCA support:                no
DVB API with COOLAPI support:            no
DVB API with COOLAPI2 support:           no
DVB API with STAPI support:              no
DVB API with STAPI5 support:             no
DVB API with NEUTRINO support:           no
DVB API read-sdt charsets:               yes
Anti-cascading support:                  no
Debug mode:                              yes
Monitor:                                 yes
Loadbalancing support:                   yes
Cache exchange support:                  yes
Cache exchange AIO support:              yes
CW Cycle Check support:                  yes
LCD support:                             no
LED support:                             no
Clockfix with realtime clock:            no
IPv6 support:                            no
Emulator support:                        yes
Built-in SoftCam.Key:                    no

camd 3.3x:                               no
camd 3.5 UDP:                            yes
camd 3.5 TCP:                            yes
newcamd:                                 yes
CCcam:                                   yes
CCcam share:                             yes
gbox:                                    no
radegast:                                yes
scam:                                    no
serial:                                  no
constant CW:                             yes
Pandora:                                 no
ghttp:                                   no

Reader support:                          yes

Nagra:                                   yes
Nagra CAK7 (Merlin/Cameleon/Cayman):     yes
Irdeto:                                  yes
Conax:                                   yes
Cryptoworks:                             yes
Seca:                                    yes
Viaccess:                                yes
NDS Videoguard:                          yes
DRE Crypt:                               yes
TONGFANG:                                yes
Bulcrypt:                                yes
Griffin:                                 yes
DGCrypt:                                 yes

cardreader_phoenix:                      yes
cardreader_drecas:                       no
cardreader_internal_azbox:               no
cardreader_internal_coolapi:             no
cardreader_internal_coolapi2:            no
cardreader_internal_sci:                 yes
cardreader_sc8in1:                       no
cardreader_mp35:                         no
cardreader_smargo:                       yes
cardreader_pcsc:                         no
cardreader_smartreader:                  yes
cardreader_db2com:                       no
cardreader_stapi:                        no
cardreader_stapi5:                       no
cardreader_stinger:                      yes

samur

according to you, how can i solve this?:

Tivusat_183E [internal] card detected

Tivusat_183E [internal] detect nagra tiger card

Tivusat_183E [internal] card system not supported

Tivusat_183E [internal] Normal mode failed, reverting to Deprecated Mode

Tivusat_183E [internal] Warning: Card returned error on setting ifsd value to 251

Tivusat_183E [internal] detect nagra tiger card

Tivusat_183E [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

Tivusat_183E [internal] T1 Resync command error, trying to reactivate!

Tivusat_183E [internal] card system not supported

Tivusat_183E [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

Tivusat_183E [internal] card initializing error

thanks

Quote from mc0807

Hi dacorsa.Do you have IPK? Greeting

for now to update Tivusat 183E you have to use oscam by samur, see the original thread:

Thread

183D/183E EMM Activation via the http/https server with OSCam

Now, you can download emms from http and https pages
both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.

emm is only added to the card if your reader is : 183D or 183E,
users also can create there own "URL" example:
For rentry: emm_url = https://rentry.co/"xxxx"/raw
for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."
#####
1)_Locally Activation (server side):
(Code, 25 lines)


##


2)_ Remotely activation (client side):
clients (cccam,…

samur

Aug 17th 2023

Quote from fairbird

This test are bin file .. Please test it and feedback ...

Yon need to install libdvbcsa first ..

Code

opkg update && opkg install libdvbcsa1

Selection_001.png

is possible to support updated of Tivusat card 183E?

best regards

Quote from dacorsa

Hi all,

i have a problem with this oscam from samur i see in the log this:

Normal mode failed, reverting to Deprecated Mode

Warning: Card returned error on setting ifsd value to 251

Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

T1 Resync command error, trying to reactivate!

Tivusat [internal] card system not supported

Tivusat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

Tivusat [internal] card initializing error

and the card can not be read, any solution?

with ncam i can read the card

thanks

Display More

Who can help me to solve this problem?

thanks

best regards

ok thanks, you're a gentleman

:)

Hi all

i tried to use s3 script on ubuntu to build oscam, but i got many failed during patching for emu 799, why?

what patch i can use?

  Emu Revision  : 799

  patching file -----> CMakeLists.txt
  Hunk #3 succeeded at 455 (offset 33 lines).
  Hunk #4 succeeded at 500 (offset 33 lines).
  Hunk #5 succeeded at 550 (offset 33 lines).
  Hunk #6 FAILED at 672.
  Hunk #7 FAILED at 679.
  Hunk #8 succeeded at 808 (offset 54 lines).
  Hunk #9 succeeded at 931 with fuzz 2 (offset 72 lines).
  patching file -----> Makefile
  Hunk #1 FAILED at 58.
  Hunk #2 succeeded at 294 (offset 18 lines).
  Hunk #3 succeeded at 419 (offset 18 lines).
  Hunk #4 FAILED at 448.
  patching file -----> config.h
  Hunk #1 succeeded at 1 with fuzz 1.
  Hunk #2 succeeded at 35 (offset 1 line).
  patching file -----> config.sh
  Hunk #1 FAILED at 1.
  Hunk #2 FAILED at 26.
  Hunk #3 succeeded at 295 (offset 2 lines).
  Hunk #4 succeeded at 354 (offset 2 lines).
  Hunk #5 FAILED at 471.
  Hunk #6 succeeded at 711 (offset 4 lines).
can't find file to patch at input line 315
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: ffdecsa/CMakeLists.txt
|===================================================================
|--- ffdecsa/CMakeLists.txt     (revision 11726)
|+++ ffdecsa/CMakeLists.txt     (working copy)
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
can't find file to patch at input line 335
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: ffdecsa/ffdecsa.c
|===================================================================
|--- ffdecsa/ffdecsa.c  (revision 11726)
|+++ ffdecsa/ffdecsa.c  (working copy)
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
can't find file to patch at input line 556
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: ffdecsa/ffdecsa.h
|===================================================================
|--- ffdecsa/ffdecsa.h  (revision 11726)
|+++ ffdecsa/ffdecsa.h  (working copy)
--------------------------
File to patch: 
Skip this patch? [y] 
Skipping patch.
  patching file -----> ffdecsa/parallel_128_neon.h
  patching file -----> globals.h
  Hunk #2 succeeded at 1945 (offset 64 lines).
  Hunk #3 succeeded at 2663 (offset 74 lines).
  patching file -----> module-dvbapi.c
  Hunk #1 succeeded at 11 with fuzz 2.
  Hunk #2 succeeded at 2658 (offset 9 lines).
  Hunk #3 succeeded at 2707 (offset 9 lines).
  Hunk #4 FAILED at 7851.
  patching file -----> module-emulator-biss.c
  patching file -----> module-emulator-biss.h
  patching file -----> module-emulator-cryptoworks.c
  patching file -----> module-emulator-cryptoworks.h
  patching file -----> module-emulator-director.c
  patching file -----> module-emulator-director.h
  patching file -----> module-emulator-icam.c
  patching file -----> module-emulator-icam.h
  patching file -----> module-emulator-irdeto.c
  patching file -----> module-emulator-irdeto.h
  patching file -----> module-emulator-nagravision.c
  patching file -----> module-emulator-nagravision.h
  patching file -----> module-emulator-osemu.c
  patching file -----> module-emulator-osemu.h
  patching file -----> module-emulator-powervu.c
  patching file -----> module-emulator-powervu.h
  patching file -----> module-emulator-streamserver.c
  patching file -----> module-emulator-streamserver.h
  patching file -----> module-emulator-viaccess.c
  patching file -----> module-emulator-viaccess.h
  patching file -----> module-emulator.c
  patching file -----> module-radegast.c
  Hunk #1 FAILED at 2.
  Hunk #2 FAILED at 86.
  patching file -----> oscam.c
  Hunk #2 succeeded at 427 with fuzz 2 (offset 3 lines).
  Hunk #3 FAILED at 448.
  Hunk #4 FAILED at 1845.
  Hunk #5 succeeded at 1944 with fuzz 2 (offset 11 lines).
  patching file -----> webif/config/dvbapi.html
Reversed (or previously applied) patch detected!  Assume -R? [n] 
Apply anyway? [n] 
Skipping patch.

  Patch Result
  ------------
  Hunk Count : 31
  Fail Count : 12

is possible to patch ncam to update the Tivusat_183E??:

Thread

183D/183E EMM Activation via the http/https server with OSCam

Now, you can download emms from http and https pages
both local and remote, clients can send emm, means remote clients using: cccam, newcamd and camd3x.

emm is only added to the card if your reader is : 183D or 183E,
users also can create there own "URL" example:
For rentry: emm_url = https://rentry.co/"xxxx"/raw
for github: emm_url = https://raw.githubusercontent.com/"xxxxx/xxxx..."
#####
1)_Locally Activation (server side):
(Code, 25 lines)


##


2)_ Remotely activation (client side):
clients (cccam,…

samur

Aug 17th 2023

thanks

There is no image for my dec Mutant HD 51 4K

Quote from gaccu

Quote from dacorsa

ciao DR-10

grazie per il tuo lavoro ma entrambi i binari arm sulla mia openatv mi danno errore:

./oscam-1.20_svn-satlodge-team11740-799-arm-newnigma2-linux-gnueabihf-ssl-libusb

./oscam-1.20_svn-satlodge-team11740-799-arm-newnigma2-linux-gnueabihf-ssl-libusb: symbol lookup error: ./oscam-1.20_svn-satlodge-team11740-799-arm-newnigma2-linux-gnueabihf-ssl-libusb: undefined symbol: SSL_load_error_strings

per favore potresti mettere in download anche le librerie coinvolte? grazie libssl.so libcrypto.so libatomic.so

Display More

anche solo per rispetto di chi ci ha studiato metti la SatLodge image

Display More

non sapevo assolutamente che esistesse questa img, dove la scarico?

Grazie

Hi all,

i have a problem with this oscam from samur i see in the log this:

Normal mode failed, reverting to Deprecated Mode

Warning: Card returned error on setting ifsd value to 251

Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

T1 Resync command error, trying to reactivate!

Tivusat [internal] card system not supported

Tivusat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1

Tivusat [internal] card initializing error

and the card can not be read, any solution?

with ncam i can read the card

thanks

ciao DR-10

grazie per il tuo lavoro ma entrambi i binari arm sulla mia openatv mi danno errore:

./oscam-1.20_svn-satlodge-team11740-799-arm-newnigma2-linux-gnueabihf-ssl-libusb

./oscam-1.20_svn-satlodge-team11740-799-arm-newnigma2-linux-gnueabihf-ssl-libusb: symbol lookup error: ./oscam-1.20_svn-satlodge-team11740-799-arm-newnigma2-linux-gnueabihf-ssl-libusb: undefined symbol: SSL_load_error_strings

per favore potresti mettere in download anche le librerie coinvolte? grazie libssl.so libcrypto.so libatomic.so

Quote from supertommy

Quote from dacorsa

Hi all,

i have tried many times different configuration and link of url , github and pastebin but after 1 week card not update...

Someone can help me also sending a private message on how can i solve this? i have a gold card 183E.

Best regards

PS card seems receive emm:

pasted-from-clipboard.png

Display More

me too

i ave checked everythink is ok, then debugging i found this error but i could not find a solution:

2024/02/23 23:07:24 7E98DBA7 c (reader) Tivusat_183E [nagra] EMM: emm count 1 rewrite 1

2024/02/23 23:07:24 7E98DBA7 c (reader) Tivusat_183E [nagra] EMM: HTTP https://rentry.co/#########2024/02/23

23:07:24 7E98DBA7 c (reader) Tivusat_183E [nagra] EMM: HTTP SSL connection using TLS_AES_256_GCM_SHA3842024/02/23

23:07:25 7E98DBA7 c (reader) Tivusat_183E [nagra] EMM: HTTP ERROR: Unknown reason

Display More

seems like you need some library of ssl, but maybe i'm wrong

Hi all,

i have tried many times different configuration and link of url , github and pastebin but after 1 week card not update...and stop to works

Someone can help me also sending a private message on how can i solve this? i have a gold card 183E.

Best regards

PS card seems receive emm:

pasted-from-clipboard.png

Quote from gadio

For me it's enough to know if some channel is running or not. Anyway I also made and this script to check stb status and turn it off or on:

Bash

#!/bin/bash

if [ $(wget -O - -q http://127.0.0.1/web/powerstate | grep "\(<\|</                                                                                        \)e2instandby" | tr -d '\n' | sed "s/.*<e2instandby>\(.*\)<\/e2instandby.*/\\1\n                                                                                        /g") = true ]; then

while true
do
        read -p "The receiver is on standby mode. Do you want to turn it on? Yes/                                                                                        No: " answer1

   case $answer1 in
   [yY]* ) wget -O - -q http://127.0.0.1/web/powerstate?newstate=4                                                                                         2>&1 1>/dev/null;
           echo "The receiver is on!"
           break;;

   [nN]* ) exit;;

   * )     echo "Dude, just enter Y or N, please."
           ;;
   esac

done

else

while true
do

        read -p "The receiver is running. Do you want to put receiver in standby m                                                                                        ode? Yes/No: " answer2

  case $answer2 in
   [yY]* ) wget -O - -q http://127.0.0.1/web/powerstate?newstate=5                                                                                         2>&1 1>/dev/null;
           echo "The receiver is going on standby mode!"
           break;;

   [nN]* ) exit;;

   * )     echo "Dude, just enter Y or N, please."
           ;;

  esac
done

fi

Display More

Powerstate can be changed to deep standby or reboot enigma or receiver.

on my mutant hd51tells me always :

root@mutant51:~# checkE2.sh

The receiver is running. Do you want to put receiver in standby m ode? Yes/No: n

root@mutant51:~# checkE2.sh

The receiver is running. Do you want to put receiver in standby m ode? Yes/No: y

The receiver is going on standby mode!

root@mutant51:~# checkE2.sh

The receiver is running. Do you want to put receiver in standby m ode? Yes/No: n

WHY?