Posts by Lexzie

Quote from hecha71

Quote from piterfree

the Front Panel Display

Skin Setup

Display_Skin_12

they don't work or are not suitable for the format...it could be solved...thanks

what kind of display skin are you writing about? there are no skins in this image, only one -default...

unpacked the image openpli-12.3-dm920-original-20230722.zip there is no other than the default , no more display skins ..

unless you yourself have placed from the image of the openpli from the satpong into this

here's a try I pulled out of the image - I have no problems everything is displayed normally..

Display More

I can choose a Display Skin now, but the picon is not showing on the LCD.

Quote from hecha71

Quote from Lexzie

Can I use this in Barry Allen?

Thanks, I have manged it.

First notice is the bad screenshots again:
pasted-from-clipboard.png

Can I use this in Barry Allen?

I am desperate. Tried A LOT.
I admit, I haven't read ALL 47 pages here, what also can give false clues what to do.

When tuning directly into a channel, I see OSCam decoding.
When using streamrelay the reader is not used anymore (I think).

I tried oscam-11718-798.armv7ve, oscam-11718-798 (armv7ve libusb pcsc) and oscam-11718-798 (armv7ve libusb aio ipv6).
I have a DM920 with OpenPLi 8.2, installed oscam-icam 11718-798, below my config (maybe it's totally crap now from trying different things).

Include ECM in http streams is enabled, Descramble sending http streams is disabled, Descramble receiving http streams is disabled and Load unlinked userbouquets is enabled.

Changed this to

Include ECM in http streams is disabled, Descramble sending http streams is enabled, Descramble receiving http streams is disabled and Load unlinked userbouquets is enabled.

And it worked. I'm VERY sure I tried that before. (So, I have to figure out what else has changed...)

As I beleive I have to use dvbapi, not radegast.
How to config the one or the other?
Because Live Log keeps saying:

(emu) Stream client 0 request /1:0:19:83:6:85:C00000:0:0:0:

(emu) WARNING: stream client 0 no data from stream source

(emu) send_to_radegast send failure

pasted-from-clipboard.png
(dvbapiau is the name of the dvbapi user)

[streamrelay]
stream_source_auth_user       = dvbapiau
stream_ecm_delay              = 5
stream_relay_ctab             = 098D,0960,0961,0963,0919,093B,09CD

Quote from W@Rp

dm920 - Python 3.11.2 - openPLi-develop - homebuild

- Python 3.11.2

- GCC 12.2.0

- Glibc 2.37

- OpenSSL 3.0.8

- Busybox 1.36.0

- GStreamer 1.22.0

- FFmpeg 6.0

- ServiceApp

- OpenWebif 1.5.2

- CI+, WLAN, LED setup, Display skins

- blindscan, cablescan, terrestrialscan, fastscan

- CCcam 2.3.2a, OScam-icam, OScam-emu, OScam 11718

- E2 settings 75°E-45°W, streams

- feed dm920/drivers/settings/skins/plugins

update 10-03-2023:

- FFmpeg 5.1.2 → FFmpeg 6.0

- enigma2-develop-20230310

- Improve AdapterSetup

- updated Feeds

and more

Download openPLi-python3-dm920

openpli-develop-dm920-20230310-Py3.tar.gz

Display More

Barry Allen won't start with this file.

Thanks for the share.
There were still problems here with the last image, so I had to flash again.

Yes I would like to have a new link too...please.

Password is set, I have to use it when connecting with Telnet or FTP.
Connecting with WinSCP (SFTP) gives this message: "Cannot initialize SFTP protocol. Is the host running an SFTP server?"
Connecting with PuTTY (SSH) works... Must be something with a new fingerprint. Normally I get a message that the fingerprint has changed the first time I logon after a flash.

Another bug (?):
I try to add a username and passwordt to use for mounting to my NAS, then PLi crashes.

SSH is not working here. How do I enable SSH?

Quote from djangel912

i just do some updates on file now

CAN SOMONE POST A OSC*M LOG WITH DEBUG OF 0963 ?PLS

I have a 0963 card, tell me what log you need.

Can anyone post a link to the latest image from Satpong with all bouquetlists in it?

Does anyone know how this works:
When I update via SSH with 'opkg update|opkg upgrade' everything is updated except the bouquetlists.

Quote from master G

Lexzie he deleted all his own posts without any explanation.

Oh no. Not again....
Where to get his images now?

Jootje looks like @satpong is gone?
You're replying to him, but I don't see his posts.

Quote from satpong

openPLi-8.1-dm920

based on OpenPLi develop » Nightly builds

- cccam 2.3.9, gbox 811k, oscam-tnt, oscam-emu 11704, oscam 11704 (port 8888)

- E2 settings 70°E-45°W, Abertis TDT 30.0°W, BBC 27.5°W, RTRS T2-MI-PLP 54.9°E

- GStreamer 1.18.5, ServiceApp, Streamlink, YouTube, Streams, ...

- OpenWebif, WLAN, CI+, HDMI-in, LED setup, ...

- feed plugins/settings/picons/softcams, ...

- blindscan, cablescan, terrestrialscan, fastscan

update 18/12/2021

- openwebif_1.5.0-git20211218

- youtube_h1+git904

- A/V Setup

- display skins

Image not yet tested in flash memory

Tested with BA multiboot = OK

linuxsat-support.com/cms/attachment/184833/

Display More

Tested in flash memory. Looks fine.

Is there a way to add hbbTV?

Another thing dealing with audio.
I asked the guys from PLi to add the feature to convert AAC to PCM Multichannel or AC3. But of course Dreambox, so they don't want to do that (although they found another box who can do that too).
The feature is available in Openvision, but i don't want that image.
4049c8cd6fafe486.png

The patch for that should be in these repositories, I hope you know how to implement that?
https://github.com/fairbird/en…on/Components/AVSwitch.py
https://github.com/OpenVisionE…on/Components/AVSwitch.py

It's the same. On cable channels I also have no audio when I choose right channel only.

Great work @satpong ! A few things that were not working are working again now.
One thing that has never worked good on my DM920 is when selecting specifically the right channel I hear nothing.
F.e. on Vatican Media Europe (Hotbird) if you choose audio PID 2044 you have on left channel English, the right channel should be Spanish (you hear it when set to stereo).

42ae49acadc7b40f645d71.png

It always makes me angry when I have to do something in Linux.
Always errors and other assume you're a super-specialist.
Why saying:
enter:

cd /opt/s3
./s3
When it's actually
cd /opt/s3
sudo apt install ./s3

?

Just to give an example.

After that I started s3 menu and got all errors that a lot is missing.
Trying to install that didn't work, so (again) I give up.

In this way I never are going to (want to) understand Linux.