Posts by taveners

Dear Ahmed

I tried to install another IPK plugin with DCC - Telnet. But error, ipkg or opkg not found on Neutrino. Can you suggest me a solution to install ipk.

Now 11 free server work

Tested OK. Works on H7 OATV 6.4.

Dear ahmed gazye

have a image backup for 7162 with freeserver scripts already installed ?

I tried, but without success. What linux distribution to use ??
Jffs2 images on Knoppix are not recognized for repacking

Hy guys

Frequently many image backups for 7162 are too large to load into memory.

Flash memory freezes with error.

I read this guide

Some scripts for extracting and re-packing e2jffs2.img files.
but I failed.

There are other ways to compress the image file ??

.

Ciao,

provo a caricarla ma durante la scrittura della flash si blocca con ERR appena arriva a E299.

Suggerimenti ??

OA TV the best

Open ATV

In conclusion, I installed a fresh image
Thanks

joeuser
Thanks for repacked image.
Now the flash has been completed successfully without problems .

@ Championc
"It should load in all circumctances since you should be able to power up the box without being connected to an LNB at all - so pauldb's argument is somewhat irrelevant."
I agree with what you say.

After the flash is enough to disable , temporarily , the TV tuner to avoid delays.
I wanted to install the setting of Vhannibal but there is no free space . I tried to free up space but also impossible to remove the plugin the "O" :06: begins to rotate in the loop at this point must be switched off the stb.

At this point I flash the last image of OATV and installed plugins favorite .

Thanks

I install images in standard mode
"" Press and hold the OK button, Turn ON the box and wait until you see the front panel say FORC. At this point, release the OK button. Press the DOWN arrow button on the box and it will display ENIG. Press and Release the OK button. ""

The load error (LD ERR) occurs during the first upload image, not during restart after the flash

Now a new problem
I tested the remote control on Spark it's OK .
After booting of Spark, boot with E2 cycling on Boot Load Run Boot .........
Now try again to reload the image

Quote from pauldb

how many tuners are connected one or two,

do you have a usb or hard drive connected

one tuner on 13 est
usb connected

HI
I tried several times but the load images always stops with load error on display LD ERR

Thank you
Now the boot is ok , but the remote control not work on my alien 2

After flash my stb remains stuck on boot.

This fault only with backup images, with original images boot is ok.

????