Hello All,
Just an update, I used s3n0's clean config attached, added my server settings and Its seams a lot better, no freezing just certain channels take a few seconds to clear.
Thanks to masterG and s3n0's help.
Hello All,
Just an update, I used s3n0's clean config attached, added my server settings and Its seams a lot better, no freezing just certain channels take a few seconds to clear.
Thanks to masterG and s3n0's help.
From the log timeout (4001 ms)
This is OSCam giving up because the server isn`t able to supply the channel requested.
Every channel you`ve tried has this error.. So its likely a server error.. Unless you have a problem with your internet connection..
I will have a talk with provider, I have tried both wifi and ethernet and don't seam to have issues with streaming netflix.
Thanks master G
Display MoreHello.
You also have a mistake in the "oscam.user" file because the user's declaration begins with the [account] tag, and this also applies to the dvbapi special user. You are also missing a mandatory password for this dvbapi user, it should be there even if it remains empty (pwd =).
In general, your configuration looks bad. I don't know where you copied this configuration. Uhm ...
You could have used a clean base configuration and just added your remote card reader to the "oscam.server" file. An example of a clean Oscam configuration you have here:
(without defining CAIDs, PROVIDs, internal reader frequencies, and other stupidity)
Thanks s3n0,
I will try using your config and add my my server info.
Thank you again
Thanks Master G, Ive tried your ideas but still stops ager a couple of minutes. I have attached a log and removed server info, hopefully that may shed some light on my problem.
thanks again
Martin
Hello All,
I am having issues with freezing, my box is a VU+ Uno 4K SE. It's been ok up to a couple of weeks ago and now just freezes after a couple of minutes. I am getting an error disconnected: reason receive error1 but sure the reason. I have not changed any files recently so not sure why its started.
I have attached my config files so hopefully someone maybe able to help.
Box - VU+ uno 4K
Oscam 1.20+svn11572-r798
Image Openvix
Thank you
Display MoreQuoteP: 0963:000000
Try changing this line in your oscam.dvbapi file to
P: 1841:000000
The "P: 0963:000000" is for satellite but your clearly receiving cable which has a caid 1841.
Not sure if it will help much as your times seem to be pretty high, according to the log provided, but that said I've no experience with cable and those times may be normal for that caid.
Post up your oscam.server file (removing your server details , user/password info etc)
I have deleted your log though as it contains sensitive info (your server info).
Thanks, I’ve changed that, didn’t know they were different. Thinks there was an issue at server end too.
I am struggling with oscam freezing every few seconds. I have a gigablue quad which was working great. I copied the oscam files across hoping that would be ok. It has not worked and now I have freezing.
I have tried adding my server to the basic files posted but just the same. I don't really understand it but there is a line saying "
5FFCC114 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding! " at the time of freezing. I have attached my oscam files incase of an error.
any help would be great.
Hello Makbar. Thanks for replying, it's good to hear from an owner. I had a duo many years ago too great box. I'm probably leaning to ultimo 4k.
Thanks again
Hello All,
I currently have a Gigablue quad and thinking of a change. I have twin sat and cable but thinking of just cable. Been looking at VU+ duo2 or ultimo 4K. Don't need 4K yet but looking specs mainly. Only thing that sways to duo2 is I use openvix but no openvix for ultimo 4K yet. I fancy trying black hole so may not be an issue.
Any help would be great. Thanks
Thanks, I'll have another go, I have tried another computer with same lead and got same result. I will get a null cable and have another go.
Thanks again
Sent from my D6503 using Tapatalk
Sorry to be a pain,
Connected serial cable think its a null, opened putty ,set to com port and baud, switch box on and nothing, Cant type anything as if its not connected.
Will make one I think to be sure.
attached pics of my setup
I have tried flashing correct bootloader but the USB is unresponsive.
Sent from my D6503 using Tapatalk
I have just looked at the box again after your suggestion and to my horror it's a 800 se plus. That's why it won't connect.
I am not sure which xml file and Broadcom chip is in it.
Sent from my D6503 using Tapatalk
I am using the xml file people are saying for a gigablue se. I haven't actually checked the nand chip. I will do now, thanks
Sent from my D6503 using Tapatalk
Hello again,,
Still struggling but this is where I am,
Clean install of Windows xp 32bit,
Installed .Net version 2, version 3, 3.5, 4 in that order,
Installed BBS without using setup file,
installed BCM97325
Copied .xml file to flashes folder,
turned computer off,
connected board to box and switched on,
Switched box on, switch comper on,
BBS still show disconnected....
Not sure where to go know,
thanks
Just an little update.....
I have installed winxp on another machine, the board was installed as a Broadcom test board which is different and I didn't see an error. I have removed the jumper as suggested. I still cant get the box to connect. I have tried to do a boot log but nothing shows on screen, could be a damaged null cable. I have posted extra pics to id the wiring of the bbs plug. I have also tried different gnd pins and swapped scl with sda on the board
Load up some pics of your connections mate.
Have you installed network framework on your xp machine?
To update on things,
I have reinstalled .net 4 to see if that makes a difference, and it doesn't. I am not sure if the drivers for the board are correct so there is a screen of my device manager
I have attached some pictures to help point me in the right direction and an error I get.
Thank you
Hello All,
A friend of mine has flashed his 800se with a 800ue boot loader, he first flashed it with 800ue image. It is now stuck on boot. I have tried to jtag it but I cannot seam to get bbs to connect. I am using a Cypress CY7C68013A-56PVXC (FX2LP) and have installed BBs onto an win xp machine. I have a guide for pin out of the connector but having no luck. Windows detects the board as a Cypress CY7C68013A-56PVXC (FX2LP) so not sure where to go.
Just wondered if the box is scrap. any help in the right direction would be great. My head is spinning somewhat reading various guides with I'm confused a bit.
Thanks Martin