Posts by chelseabaz

  • 7020 stuck dreamup does not recognise it

    need help please guys
    got a problem writing image with dreamup v1339 said CRC32 on flash from box not equal local CRC32!!
    now when i boot box i get 2 vertical bars and it is stuck,i cant get dreamup to recognize it either,any other ideas lads,it is an original 7020 which i have owned for years and used loads of different images on in the past, i tried the latest pli from their website and this happened

  • 7020 sd image with oscam

    Thanks mate much appreciated :09:


    - - - Updated - - -


    got a problem writing image with dreamup v1339 said CRC32 on flash from box not equal local CRC32!!
    now when i boot box i get 2 vertical bars and it is stuck,i cant get dreamup to recognize it either,any other ideas lads,it is an original 7020 which i have owned for years and used loads of different images on in the past

  • 7020 sd image with oscam

    hi guys
    i have an original 7020s and want to use it just as a server for a sly uk card and would like to use oscam.
    i am confused as in i have seen images for 7020 HD in the enigma 1 section,can i use these images on my 7020s sd box or can someone advise on which image will let me download oscam,i am not worried about anything else just using as a server,maybe with dydns also would be good.
    cheers Baz

  • sly uk register for sports 5 should i do this

    hi all
    i have a sly uk card with sports and movies only sd channels and want to know if i go to activate sly sports 5 will they say i need to get a hd box etc etc, it is married to a sd box at the moment and obviously do not want them saying i need a hd box


    anyone done this as yet and know what to do or say


    regards Baz

  • help dm 500s update @*** card uk

    in my opinion the easiest way to update sly card is with newcs/mgcamd......oscam is just as good but a bit more complicated.
    you dont say what image you have but download mgcamd 1.3x with newcs 167.
    edit your details in files,if it is just the box the card is in just add your boxkey if you have friends connecting you need to add each user.


    newCSconfig>
    <readers name="Card Readers">
    <device>
    <name>lower</name>
    <type>sci</type>
    <mhz>600</mhz>
    <node>/dev/sci0</node>
    <parity>odd</parity>
    <reset>normal</reset>
    <export>Yes</export>
    <enabled>Yes</enabled>
    <blocksa>No</blocksa>
    <blockua>No</blockua>
    <blockga>Yes</blockga>
    <boxkey>12345678</boxkey>
    also have au on
    <au>yes</au>
    mgcd_CONFIG
    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }


    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }


    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 01 }


    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps au pid
    U: { 05 } 0x1ACB


    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }


    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 33 }


    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30


    # network ecm timeout in seconds
    K: { 04 }


    # newcamd dead routes connect retry, sec
    Q: { 120 }


    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 02 }


    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password


    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80


    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 03 } 192.168.0.124 7025 /tmp/mgcamd.log


    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }


    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }


    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }


    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }


    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 06 }
    F: { 00 }


    this will work ok with mgcamd 1.35a or 1.38

  • telnet commands on new e2 images

    hi all
    on the older E1 and E2 images i used to telnet ¨ps´´ to see what was actually running but with latest images this does not work,does anyone know what does on new images and maybe other commands also
    thanks guys Baz

  • Need OSCAM + CCCAM config for JSC I***** please

    hi
    this is what i use for oscam with mgcamd with irderto card


    [global]
    nice = -1
    WaitForCards = 1
    ClientTimeout = 5
    CacheDelay = 120


    [newcamd]
    Key = 0102030405060708091011121314
    Port = 34000@0603:000000


    ——


    [reader]
    label = JSC
    Protocol = internal
    detect = CD
    device = /dev/sci0
    force_i***** = 1
    Group = 1
    EMMCache = 1,3,2
    mhz = 600
    cardmhz = 600
    caid = 0603
    ident = 0603:000000
    camkey = 0000000000000000
    camkeydata = 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 0000000000000000000000000000
    ecmwhitelist = 0603@000000:34


    ——


    [account]
    user = user
    pwd = pass
    group = 1
    au = JSC


    hope this helps
    Baz

  • uk channels

    i dont think bbc prime exists anymore,you can find all the bbc and itv regions on vhannibal settings under the boutique freesat mate,they will be in the same area as all sly uk channels