Posts by Mee®kat

  • The End has arrived :(

    Quote from neolxs

    something to do with a change in broadcast, Mpeg 4. Write up about it a few pages back.


    I,m not convinced its that because the latest enigma2 recievers show mpeg4 broadcasts..however the exact version of mpeg broadcasts from italia remains to be seen..i suppose we should all expect major changes in the coming months with ultra hd on the way..i,m pretty sure broadcasters wont want that shared.



    Quote from neolxs


    I started the thread, it was about *** italia !, but seeing as Sly UK have been changing things it can be about both! lol


    There is actually another thread regarding rte2 which i started myself and it is located in the vip section/sync and i have both posted on this thread but there is so many threads being posted regarding channel issues these days so like anything else its pretty easy to get a tad mixed up what threads are for what problems.


    Italia and slyuk appear to have different issues albeit they surfaced at around the same timeframe.


    Quote from sup3rskunk

    just to clarify the situation: the problem with almost every hd channels in sly it, IS NOT the new codec. the codec is still the "old" one, the problem is a PAIRING between card and reciever. only official reciever can open that channel cause of new algorithm


    This does seem a more logical explanation although if this is the case then they are using the same pairing algo on all boxes because its been reported that a new paired card will work on all official italia stbs..if this is the case then it makes it much easier for a fix to be put into place that can be implemented into an emu allowing everyone to receive these channels again although i am a little sceptical about that unfortunately:(


    MK

  • Oscam Issues

    It looks like you have 3 lines from other servers...why the need to exploit their ports used? they will obviously have a different ip from you but it helps nobody showing off any ports used whatsoever!


    key = 0102030405060708091011121314 no need for that either with cccam protocol..not even sure how you you added that in reader setup.


    I am seeing this day in day out on here with ports and dyndns being plastered on open forums? why?


    MK

  • Not happy

    I think i would have called the cops if i heard someone moving ladders and then seen them being climbed at that time in the morning..madness

  • any help with this please entitlements not updating

    Quote from seasider

    ok tried that still no joy
    cline into Ccam fig and
    and then the above in oscam user with out the C:


    Still no joy with what? i thought your card not updating entitlements was the issue here..if thats the case then you need to wait my friend as emms are not instant!


    You should be able to see emms being blocked in oscam and when your unique comes down it will show as written.

  • The End has arrived :(

    Quote from sync

    So there are a few options


    Wait for new "fixed" versions of csp and multics
    Use oscam dvbapi on client boxes to view
    Or just switch completely to oscam and forget about csp/multics, some may not like that one though lol


    Or wait and see if it works with older versions when people update their oscams hehe

  • any help with this please entitlements not updating


    Yes here we go...never ever display any port you use whether its a webif or a server port..edit your newcamd port out for your own security.


    Cant say i can see why your card has not updated other than the cam you are using is configured incorrect...do you use mgcamd or cccam with your user account to update your card.


    Also dont know what that vu reader patch info is doing there?


    MK

  • The End has arrived :(

    Quote from sync

    I forgot to mention that oscam - CSP - CCcam will still give problems unless either a fix or new version of CSP is released


    Yep i see that...same issue with multics r74 and i would imagine r75 so need a new release of that protocol too:(

  • The End has arrived :(


    Whats this all about dude and why is it posted on this particular thread?

  • The End has arrived :(

    Quote from neolxs

    Seen on a few sites that Ive been reading that measures for Foxtel in Australia have been cracked and its been busted wide open again.


    Not sure how true this is but if it is then it surely is fantastic news, just hope we dont have to wait 3 years for a fix!


    No chance that they have disassembled nds hw pairing down under but they have been trying for a couple of years and i think the majority of aussies have now given up.


    I think whatever you have read is referring to ird€to not nds.


    Certian foxtel channels opened via cs and were running on either an original Ird€to card or some other emulator card similar to dragon cards..aurora card possibly but its closed now anyway.


    MK

  • The End has arrived :(

    Well its not the end..Not yet


    Quote from Ten Below

    there was a complete blackout of the italia package a couple of years ago but the oscam devs had it back working in only 2 weeks but the truth is nobody knows what will happen next.


    Yes i remember that one well although if i remember correctly it was in 2009/2010 when italia made nano byte changes to caids 0919/093b cards and the first attack took a few weeks to fix and a second change a month or so later seen it sorted within a couple of days....after that all CW changes stopped with italia//possibly at that time they gave up on that particular attack method believing it was fruitless as italian users would have logged the new control word anyway and send it to emu developers.


    From what i have been reading regarding sly italy and i have not read much on the subject is that people using these cards are seeing (not found) in their log which kinda tells us this is not some standard cw change but a new pairing method that will take some working out especially when users are having problems with official receivers without calling the provider in question to recieve the channels again.


    I am actually past caring what happens with the cs scene now tbh because over the past 6 months or so i have been reading posts from members who by the looks of it cant even tie their own shoelaces and are running servers so it really is no bloody wonder providers are fighting back.I also read that one member placed his nagra 3 card into a card programmer and started pressing buttons with software not even designed for his card which in turn will have damaged it and of course will alert the provider its been tampered with when the card goes back online..Just crazy!


    I think all the easy to do cards...the copy and paste...ctrl.c ctrl.v copy and paste configs/backup images ready to go plug and play..convert 10 digit numbers in calculator packages will all soon be a problem.


    In the meantime i think i will stick to an encryption that the majority of the monkeys cant exploit and scrap the rest.


    MK

  • Solo will not boot

    Quote from rs trophy

    Hello I have got a solo 2 not a clone, it was runing open atv 3.0 but is stuck on boot screen. It says booting 99 can not load via USB new image , box was ok for about 3 months ,can I load box with rs232 cable with original image from vu thanks for any help .


    Sounds like a bootloader problem..main problem is there is clones out there...of which we dont know who owns them without further ado/

  • thinking of buying a prism cube

    Quote from ekkostar

    The early Enigma machines were slower than the later ones.... that's just natural STB progression really. The same will apply to the Prismcubes I guess? The Ruby is only the first...


    Also E2 is very mature now so it's never a fair comparative really but for a first gen box the Prismcube has enough about it to suggest this is where things could be headed?


    So where the hell are they?? your pm box is full ekkostar! i take it you are swamped with prismcube box requests/questions...?


    MK

  • PLS Help OSCAM AU for TNK with Polsat on GIgaBlue OPenATV !?

    Well...it is a conax card and it will update perfectly in oscam using an mgcamd client providing your server is setup correctly which we will get to!!!!


    For a start you have no rsa key!!!? which is required for this card and secondly your emm cache is all wrong.


    Your user account is also all wrong dude..no need for dvapi/betatunnel or uniq there mate.


    Conax cards update on the 1st of every month but as i have already said above it must be configured correctly...server and client! sbox also works perfectly as nano has stated and preferred by most running these cards tbh.


    MK

  • How to get OScam to share

    Quote from hacked

    I would have added this to oscam.user:


    uniq = 1


    Why the need for that setting mate..all this will do is kick a user if their broadband provider changes their ip address which happens regularly with most isps..even something simple as a reboot with dhcp enabled on a clients box can cause the same issue.


    If you are worried about dual logins then it cant be very good friends that you have connected to your server.


    MK

  • Removing Narrator from Audio Track on BH 2.0.7

    Menu/setup/system/auto language selection settings.


    Mines is set as below although this is for multi satellites so if its for 1 provider then only set it up for your spoken language/provider


    Audio language selection 1 ===== English
    Audio language selection 2 ===== Original
    Audio language selection 3 ===== Undetermined


    You will also have to press audio on each channel where NAR is being used that you have previously selected before this setting was added and change it to your chosen language...


    MK