hi all
i have installed 2 addons on it like BOKRA and UKTV again , but when i tried to add more addons don t works like Adriansports , but this last one is ennebled , but i can find it in addon repository to install it
strange
hi all
i have installed 2 addons on it like BOKRA and UKTV again , but when i tried to add more addons don t works like Adriansports , but this last one is ennebled , but i can find it in addon repository to install it
strange
Hi
I tried to install this last update for image on my vu+solo2 , when it start after the flash , i get starting , avec Blake hole screen and stay like this
can you help me why
but the old BH 2.17 work normaly
i tried to add source fusion.tvaddons.ag on it , but when i got got install from zip file the represatory , it don t work why
- - - Updated - - -
i have BH 2.17 with kodi on it
hi all
i need to clear me somethings
i want to install XBMC on my Vu+solo2 , is it necessary to have an HDD on it to install Kodi
thanks
i still can t get inside my vu+solo2 with DCC
i have the right Ip
this is my Dcc.ini file
[Network]
LastPath=C:\Users\PC GLOBE\Desktop\
MoviePath=c:\
PacketDelayUp=0
PacketDelayDown=0
LanType=2
NoCheck=0
FTPHold=1
HTTPLogin=0
DreamIP=192.168.1.13
RouterIP=192.168.1.1
LocalIP=192.168.1.36
Password=dreambox
[System]
ModelAuto=1
BoxType=0
Browser=0
HiddenPass=0
Language=3
SaveSize=0
[Texteditor]
Width=800
Height=600
- - - Updated - - -
no sorry it s this one
[Network]
LastPath=C:\Users\PC GLOBE\Desktop\
MoviePath=c:\
PacketDelayUp=0
PacketDelayDown=0
LanType=2
NoCheck=0
FTPHold=1
HTTPLogin=0
DreamIP=192.168.1.13
RouterIP=192.168.1.1
LocalIP=192.168.1.36
Password=vuplus
[System]
ModelAuto=1
BoxType=0
Browser=0
HiddenPass=0
Language=3
SaveSize=0
[Texteditor]
Width=800
Height=600
hi Mckee
I have installed your backup on my solo2 it s working good , when i get in with DCC for the fist time with password (vuplus) it s ok apfter times impossible to get it with DCC
with the same password strange for me , i have reinstall the same backup still having the same probleme can you help plz ?
thanks all
Bonsoir
j ai un probleme avec le mGcamd
j avais le Mgcamd qui fonctionnait tres bien , et la depuis 2 semaines il ne marche plus
au fait je fonctionne en Cccam et parfois je fonctionne en Mgcamd
mantenant des que j active le mgcamd , ca marche au bout de 2s ca plante
je ne sais ou est le probleme
merci d avance pour une eventuelle solution
Hi Inspiral
i have done g(33) save and reboot but it s the same thing
when i activate mgcamd , it s start working for 2s and stopped
hi
this is my mg_cfg file
##########################
###LINUXSAT-SUPPORT.COM###
##########################
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
Display More
Hi
when i start Mgcamd , it works just for 2 s than stop
Hi
I use blackhole image on vu+duo with cccam2.13 , i already used mgcamd1.38 on it , but now not working
is there any thing that i missed ?
thanks