aqui estao ...
Posts by napalm
-
-
Ja voltou tudo a 69 ...
-
Boas. estou na mesma situaçao. cartao seca 0100 nao abre alguns canais. Eu tenho o cartao numa vu+ e esta a atualizar as emms mas nao sei se na box original samsung se abre estes canais em 6A ainda nao testei... se abrir quer dizer que preciso de extrair alguns dados da box correcto?
-
Hello.
What is the advantage of compiling our oscam vs download from oscam.cc site already compiled?
In my case I have a ubuntu server in an atom notebook using omnikey reader. I use i686-webif-libusb-pcsc-Distribution working good -
Hi
I have a Redlight elite HD viaccess card and it is almost expiring. I've been looking but not found a way to renew the card.
I have to buy a new one? renewal would be cheaper right?thanks.
-
No the pc as server was only a test of a few hours long.
this last post is related to the vu+ solo that is no longer using high cpu. almost 6 days with no freezing and no problems of high cpu as I had before.
-
So I cleared oscam.services and oscam.provid, and disabled cccam stealth and I think it fixed the problem...
19:21:15 up 5 days, 21:28, 1 user, load average: 0.03, 0.11, 0.15
how about that?
-
I made a test server.
Installed debian 6 server on a old pc, copied the oscam files and executed it, there using the vuloso only as card reader with cccam 2.1.3.
It is running for more than 2 hours with load average: 0.00, 0.00, 0.00 ( on the PC)
vu+: load average: 0.00, 0.04, 0.06but this is no solution because it is consuming more electricity.
I just can't find out why oscam reading card directly uses so much cpu on the vu+...
-
Nothing high about those numbers buddy ?
Sorry, I don't understand your question.
-
About 30 users and 30 peers.
It must be something about the card or reader. If I disable the card reader in oscam, the average load drops immediately: load average: 0.09, 0.36, 0.72
I configured a friend vu+ solo with a seca card and in there it is 0.10 load average, so I must be doing things right ( +-20 peers)
My vu+ solo Top command:
Code
Display Moretop - 20:02:10 up 1 day, 15:49, 1 user, load average: 0.85, 0.71, 0.95 Tasks: 76 total, 1 running, 75 sleeping, 0 stopped, 0 zombie Cpu(s): 4.9%us, 1.6%sy, 0.0%ni, 90.9%id, 0.0%wa, 0.0%hi, 2.6%si, 0.0%st Mem: 106364k total, 96444k used, 9920k free, 8k buffers Swap: 65532k total, 2872k used, 62660k free, 11708k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 30640 root 19 -1 37440 24m 928 S 3.0 23.7 33:57.19 oscam 907 root 20 0 92388 37m 2172 S 2.3 36.2 55:31.83 enigma2 9972 root 20 0 2548 1116 912 R 1.3 1.0 0:01.35 top 1 root 20 0 1780 404 372 S 0.0 0.4 0:01.77 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.06 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:07.37 ksoftirqd/0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.04 kworker/u:0 6 root -2 0 0 0 0 S 0.0 0.0 0:59.47 rcu_kthread 7 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper 8 root 20 0 0 0 0 S 0.0 0.0 0:00.02 sync_supers 9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 bdi-default 10 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd 11 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff 12 root 20 0 0 0 0 S 0.0 0.0 0:00.09 khubd 13 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cfg80211 15 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod 16 root 20 0 0 0 0 S 0.0 0.0 0:00.41 kswapd0Log after I started reader with mhz settings blank:
Code
Display More2013/06/25 20:14:25 5AA7F8 h red [viaccess] Restarting reader 2013/06/25 20:14:25 5AA7F8 h red [viaccess] creating thread for device /dev/sci0 2013/06/25 20:14:25 583128 r red [viaccess] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357) 2013/06/25 20:14:25 583128 r red [viaccess] card detected 2013/06/25 20:14:26 583128 r red [internal] ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00 2013/06/25 20:14:28 583128 r red [internal] Init card protocol T0, FI=1, F=372, D=12, N=0 2013/06/25 20:14:28 583128 r red [internal] Calculated work ETU is 6.20 us 2013/06/25 20:14:32 583128 r red [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00 2013/06/25 20:14:33 583128 r red [internal] using ecm #60d for long viaccess ecm 2013/06/25 20:14:33 583128 r red [internal] type: Viaccess (standard atr), caid: 0500, serial: ########## 2013/06/25 20:14:33 583128 r red [internal] providers: 2 (FFF8F0,043800) 2013/06/25 20:14:33 583128 r red [internal] Using PIN 0000! 2013/06/25 20:14:33 583128 r red [internal] Parental lock disabled 2013/06/25 20:14:33 583128 r red [internal] ready for requests 2013/06/25 20:14:33 583128 r red [internal] found card system viaccess 2013/06/25 20:14:33 583128 r red [viaccess] card detected 2013/06/25 20:14:33 583128 r red [viaccess] serial: ########## 2013/06/25 20:14:34 583128 r red [viaccess] provider: 1, id: ######################, sa: ########, geo: empty 2013/06/25 20:14:34 583128 r red [viaccess] provider: 2, id: ######################, sa: ########, geo: FF FF FF FF 2013/06/25 20:14:34 583128 r red [viaccess] class: 01, expiry date: 2013/03/25 - 2014/03/24But Loads cpu again: load average: 1.55, 0.71, 0.71
-
with 2.1.3 I can't hear audio on some channels, it's a known problem
-
tried those settings but does not look good after 10 min:
18:19:25 up 1 day, 14:06, 1 user, load average: 2.41, 1.34, 1.04 -
Hello.
I'm struggling with this problem in about 3 months and not find a solution.I have a vu+ solo with redlight 0500:043800 card, that worked kind of fine with cccam 2.1.3 but not with 2.2.1 or 2.3, it caused high cpu usage for no reason.
So I decided to move to OSCAM. It's very flexible and many options, but cpu usage average is always high. 0.97 right now, and box is in standby, and rebooted only a few hours ago.tried a lot of configs and many different versions. None worked, now I'm always trying the last one for a few days...
OSCAM 1.20-unstable_svn build r8721 (oscam-svn8721-mips-tuxbox-oe2.0-webif-Distribution)
image blackhole 2.0.3 ( before was vti, and same results)oscam.conf
Code
Display More[global] logfile = /var/log/Oscam.log usrfileflag = 1 clienttimeout = 6000 fallbacktimeout = 2600 unlockparental = 1 nice = -1 maxlogsize = 1024 waitforcards_extra_delay = 1000 preferlocalcards = 1 usrfile = /var/log/Oscamusr.log lb_mode = 1 lb_save = 100 lb_nbest_readers = 2 lb_nfb_readers = 2 lb_reopen_seconds = 300 lb_stat_cleanup = 240 lb_savepath = /var/local/stat resolvegethostbyname = 1 failbantime = 30 failbancount = 5 [cccam] port = 12000 nodeid = version = 2.0.11 reshare = 1 stealth = 1 [webif] httpport = 8888 httpuser = * httppwd = * httprefresh = 15 httpallowed = 127.0.0.1,192.168.1.1-192.168.1.254 hideclient_to = 15oscam.server
Code
Display More[reader] label = red protocol = internal device = /dev/sci0 services = redlight caid = 0500 detect = cd mhz = 2700 cardmhz = 450 ident = 0500:043800 group = 1 emmcache = 1,3,2 lb_weight = 500 [reader] label = peer protocol = cccam device = peerdns.dns.org,12222 user = xxxxx password = xxxxxx inactivitytimeout = 30 group = 2 cccversion = 2.1.1 cccmaxhops = 1 ccckeepalive = 1 (...)And I have to use cccam to view channels in the box because oscam freezed the image but continued serving, zapping channel sometimes worked, other times had to restart oscam. because of that I use cccam as client.
oscam.userCode[account] user = localcc pwd = xxxxxx au = red group = 1,2 cccmaxhops = 2 cccreshare = 0oscam.services
Code[REDLIGHT] caid = 0500 provid = 043800 srvid = 364C,4223,4224,4225,000A,35C0,35C1,35C2,35C3,35C4,35C6,35C7,35C815:17:36 up 1 day, 11:04, 1 user, load average: 1.49, 1.04, 0.95
thank you
