Administrator...please delete this discussion...thanks and sorry for disturb :)
Posts by bioshock87
-
-
this is my oscam ...very thanks :)
Code
Display MoreUnix starttime: 1374076463 Starttime: 17.07.2013 17:54:23 Version: oscam-1.20-unstable_svn-r8756 Web interface support: yes Touch interface support: yes SSL support: no DVB API support: yes DVB API with AZBOX support: no DVB API with MCA support: no DVB API with COOLAPI support: no DVB API with STAPI support: no Anti-cascading support: yes I***** guessing: yes Debug mode: yes Monitor: yes Loadbalancing support: yes CW Cycle Check support: yes LCD support: no LED support: no IPv6 support: no Cache exchange support: yes camd 3.3x: no camd 3.5 UDP: yes camd 3.5 TCP: yes newcamd: yes CCcam: yes CCcam share: yes Pandora: yes ghttp: yes gbox: yes radegast: yes serial: yes constant CW: yes Reader support: yes Nagra: yes I*****: yes Conax: yes Cryptoworks: yes Seca: yes Viaccess: yes NDS Videoguard: yes DRE Crypt: yes TONGFANG: yes Bulcrypt: yes Griffin: yes DGCrypt: yes cardreader_phoenix: yes cardreader_internal_azbox: no cardreader_internal_coolapi: no cardreader_internal_sci: yes cardreader_sc8in1: yes cardreader_mp35: yes cardreader_smargo: yes cardreader_pcsc: yes cardreader_smartreader: no cardreader_db2com: yes cardreader_stapi: no
I have compiled this oscam with cccam/oscam guide for raspberry pi ... my server is a pcduino armv7 such as raspberry pi -
Display More
Your oscam version was probably compiled with out smargo support, in oscam webinfo click files then oscam version & look here.
You need to compile with it then the smargo protocol will work, follow this or download another version from the link on the navbar if its missing.
[h=3]Tutorial: Updating Oscam to latest SVN - Ubuntu & debian with Simplebuild[/h]
in my oscam.version = cardreader_smargo: yes
Is correctly?
Why all work correctly only with protocol = mouse? (without mhz and cardhmz) -
You would be better using the smargo protocol rather than mouse, also overclocking the card to this speed is not good for it.
if i use protocol smartreader oscam don't start...can you help me? :Dif i set:
protocol = mouse
mhz = 500
cardmhz = 357In oscam log result:
ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 5.00 MHz (specified in reader->mhz)but not work... card system not supported
-
Hi users :D,
i have installed on my server pure oscam and smargo. It works correctly with cielo cam 09CD if i insert the card after Oscam start. But...if the card is just insterted at the startup don't work. This is oscam log file:Code
Display More2013/07/17 15:33:09 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8756 (arm-linux-gnueabihf) 2013/07/17 15:33:09 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 466 2013/07/17 15:33:09 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0 2013/07/17 15:33:09 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 2013/07/17 15:33:09 0 s signal handling initialized 2013/07/17 15:33:09 0 s newcamd: initialized (fd=5, port=15501) 2013/07/17 15:33:09 0 s -> CAID: 09CD PROVID: 000000 2013/07/17 15:33:09 0 s cccam: initialized (fd=6, port=12000) 2013/07/17 15:33:09 0 s ***Italia [mouse] creating thread for device /dev/ttyUSB0 2013/07/17 15:33:09 0 s loadbalancer: can't read from file /tmp/.oscam/stat 2013/07/17 15:33:09 0 s waiting for local card init 2013/07/17 15:33:09 1DEF160 h webif: decompressed 51323 bytes back into 152244 bytes 2013/07/17 15:33:09 1DEF160 h HTTP Server running. ip=0.0.0.0 port=8888 2013/07/17 15:33:09 1DED360 r ***Italia [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=800, cardmhz=357) 2013/07/17 15:33:10 1DED360 r ***Italia [mouse] card detected 2013/07/17 15:33:12 1DED360 r ***Italia [mouse] ATR: 3F FD 13 25 02 50 80 3F FD 13 25 02 54 B0 04 69 FF 4A 50 80 0F 2013/07/17 15:33:12 1DED360 r ***Italia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/07/17 15:33:12 1DED360 r ***Italia [mouse] Setting baudrate to 38400 bps 2013/07/17 15:33:12 1DED360 r ***Italia [mouse] Calculated work ETU is 26.05 us 2013/07/17 15:33:12 1DED360 r ***Italia [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz) 2013/07/17 15:33:13 1DED360 r ***Italia [mouse] card system not supported 2013/07/17 15:33:13 1DED360 r ***Italia [mouse] Normal mode failed, reverting to Deprecated Mode 2013/07/17 15:33:15 1DED360 r ***Italia [mouse] ATR: 3F FD 13 25 02 50 80 3F FD 13 25 02 54 B0 04 69 FF 4A 50 80 0F 2013/07/17 15:33:15 1DED360 r ***Italia [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2 2013/07/17 15:33:15 1DED360 r ***Italia [mouse] Calculated work ETU is 46.50 us 2013/07/17 15:33:15 1DED360 r ***Italia [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 8.00 MHz (specified in reader->mhz) 2013/07/17 15:33:16 1DED360 r ***Italia [mouse] card system not supported 2013/07/17 15:33:16 1DED360 r ***Italia [mouse] card initializing error 2013/07/17 15:33:17 0 s init for all local cards done 2013/07/17 15:33:17 0 s anti cascading disabledThanks for reply :D
-
I use Pcduino ... Pcduino is armv7 such as raspberry pi...i have installed Oscam with this guide (Oscam server setup guide - Raspberry Pi from scratch). I need to configure Oscam on server...and client? Their use CCcam normally? Thanks :D
-
Will work fine with CCcam, look through the tutorial section & you will find every thing you need including auto install scripts like this.
[h=3]Automated Install Script for Ubuntu CCcam Server[/h]i have installed only oscam (guide to compile and install Oscam for raspberry) . Pcduino is armv7 such as raspberry pi...i need only Oscam or Oscam + CCcam. Thanks :D
-
Hi users!
I have bought a PCduino with CPU AllWinner 1GHz ARM Cortex A8. She have installed Lubuntu 12.04 . Work with CCcam? Or ubuntu is reccomended? Sorry for my bad english. :D . Thanks to all :D
