Posts by frankviana
-
-
LOW symbol rates
Test Satellite 45W: 3834 V 480
H9 twin: OK
EDISION OS MINI 4K: No signal.
I did tests: 75W and 113W too and no signal (symbol rates: 740, 651 and 883)
-
-
Eutelsat 8W (4153 L 60000):
Edision OS MINI 4K: Availink AVL6261: Signal OK (sattelite finder/manual scan), blindscan found after several times/tests, but no channels.
VU Zero4k (Si2166): No signal;
Zgemma h9 (Si2166): No signal;
Zgemma H9 Twin (Si2166): No signal;
Octagon SF8008 (Si2166): No tests until today... waiting my device....
================================================================================================================
Non Enigma2 devices and satellites:
GT-Media V8UHD (40.5W, 3.0E) - Find all T2-MI
GT-Media V8UHD (8W - Symbol rate 60.000) - No signal;
Freesky Triplo X (8.0W, 40.5W and 3.0E): Find all T2-MI/multistream channels, including symbol rate 60.000.
Frank
========================
-
Edision OS Mini 4k (First tests blindscan/manual scan T2-MI 'C band' and more...)
Today I received my device (EDISION OS MINI 4K) and started doing several tests (OpenATV/SatdreamGR). The first was related to the search in C band (I bought it exclusively for tests in C band), specifically T2-MI.
The first tests went well on the’ 40.5 W’ satellite, finding all available transponders.
Then going to the ‘8.0 W’ satellite, where after several attempts, it found some transponders, but without searching channels.
Then going to ‘3.0 E’ satellite, which found, in the blind search, only 1 transponder with several channels.
The other transponder (second multistream) appeared as data only . In these two cases (‘8.0 W’ and ‘3.0 E’), if I use astra-sm I know that it will find the channels, after decapsulation and creating IPTV lists (vuzero4k/zgemma h9 series work only this way).
What I found very interesting is that a signal appears for all T2-MI channels in the satellite list with the PLP parameters, which does not happen with my other three devices (zero4k, zgemma h9 and zgemma h9 twin).
I think that the decapsulation process is a problem of drivers that can be corrected and not of a lack of signal in the tuner. If developers need it, I can record stream with my TBS card for fix T2-MI.
EDIT: link medifire 1 GB transponder 8W for try to fix T2-MI symbol rate 60.000
https://www.mediafire.com/file/py6z2a3tsab02yn/8.0W_4153%252C415_L_60000_%25282020-10-07_13.45.34%2529_dump.ts/file
Soon I will make other comparisons, after my arrival of the simple Octagon SF8008.
=============================================================================
Frank===============
-
Display MoreDisplay More
Okay so from the github report, it would appear there is not going to be anything done by Airdigital (or the chip manufacturer )
Normally when that is the case, the plugin itself it modified for it to work.
Looking at the code ( i am not a coder) there is already some mods for 2 VU boxes.
Something will also be needed for the zgemma and C band
Could anything be done here guys ?
Just read the last 5 posts from this thread for details, You have both committed to the plugin on OE alliance in the past ??
I think blinscan performance has to be improved by Air Digital with a driver update.
But no answer. I did a lot of tests, including "issue" on github. I tried OpenSpa too (I see more blindscan options comparing other images), but only Ku band.
-
look here this may help.
Thanks. I'LL try to find partition address
-
-
And works like my vuzero4k...
So the VUzero has no problems on C band ?
You only need the "modification" for the Zgemma ?
Yes... Zero and zero4k (same tuner si2166d) working fine C band
Ony Zgemma devices (I have 9s and 9 twin) need this way to find channels using Blindscan "C band"... need fix driver and dmm plugin
But no solution until today: https://github.com/zgemma-star/meta-zgemma/issues/85
-
Nice find frankviana
So really what you need is a C band, blind scan plugin, with the changes you have done applied.
Yes... A friend help me to do this "modification", lol
And works like my vuzero4k... only difference is wrong frequency , but according my post from satellites.co.uk, see "true" frequency:
14900 - (transponder Ku) =====> (transponder C band.)
-
Display More
Try this and see...
"I got a tip on another forum on how to set up for blind scan, I have the Zgemma 9.2S and these settings also work on the Zgmma 7, here are the settings:
For C band use user definied,
Lo low 10000,
Lo High 10000 and you need to
scan from 10950 - 11750 mhz to cover all C Band.
You can scan from 11000 - 11750 for best results.
Cover all C band frequencies. 10950 is 4200 and 11750 is 3400.
On the blind scan screen the start frequency is set to 11000 and the Stop frequency is set to 11700, I set the accuracy for 5.
This receiver Blind Scans on C-BAND now, give it try on these settings.
Regards.
Chewie"
This "solution" don't work for me..
Only working this way:
https://www.satellites.co.uk/f…-twin-c-blindscan.178752/
* LOF: Universal Lnb for all C band satellites
* Tone Mode = OFF
* Change Stop Frequency = 12750 to 11300 (when start blindsc plugin)
Using 10000 for Lo low and high, looping same frequency
-
Thx. I'll test.
-
Where you found this information about try to load Android image and vídeo posted before?
-
Here, stop after select android option. No appear screen or logo android.
did you actually load android image or just select to boot from android with no image.
Boot for android. How to load some android image? Where I find?
-
After extract nfi dump to "images"
-
Here, stop after select android option. No appear screen or logo android.
-
For me, menu/zapping very very slowly. I don't know why, because OpenPli 8.0, OpenATV 5.0 very fast. Only Pure2 delay/slowly menus.
To try to solve, after delete settings from /etc/enigma2 and start configuration again, slowly too. Tried a lot of skins, but no solve.
-
Thank you, but working only this 3 images:
nand : OpenPli
OMB flash: openbh 0.6
OMB OpenPli
OMB OpenATV
When install OMB PurE2, I have a lot or error:
-
-
Yes, but no audio no video.
