Posts by wgsjsfhj

Hi all,

I have a new m3u list that does NOT have the port.

Is there a possibility to make the plugin work without the port?

Thank you

Quote from disa51

I have a dm920 with image based on original dreambox OE 2.5. When I tried to install the 1.9.1 version of the plugin, after having selected the sources to import, only Italy, the import stopped at "0" without continuing further. Wanting to exit the plugin did not allow it and I had to turn off the decoder from the rear button to be able to use it again. Maybe I'm doing something wrong. In addition to installing the plugin, do I need to do anything else? Thank you

Same exact thing with the DM 920.Receiver crashes and you can't go on.I had to manually uninstall the Plugin in order to continue.It doesn't work on the Dreambox 920.

Image GP4

Quote from Lululla

strange it should not appear if you are using the latest updated version

https://github.com/Belfagor200…s/XCplugin/plugin.py#L308

How do I install what you posted?

I gave that command, it tells me that they are already up to date.

apt-get update && apt-get install python-requests       

When opening it gives me the same warning.
The program then works well, it's just that warning at the beginning.

Hello. I have a same problem.

I use Dm920 with GP4 release and i have installed enigma2-plugin-extensions-xcplugin-forever_2.2

Every time I open the panel XCplugin appears this:

Execution progres:

python 2.7.18

checking Dependencies

updating feeds

.

.

checking python-requests

This happens every time I open the panel XCplugin

I use with Telnet

opkg install python

but i have same message.

what should I do?

Hi,

i have 920 HD with two Tuner.

-Ibrid Tuner DVB S2 Multistream and T/2

-FBC Tuner

I have 4 LNB ( 13 Est, 19,2 Est, 23,5 Est, 9 Est) + motor Stab.

LNB 9 Est it has to go on Ibrid Tuner to watch multistream channels.

I have 1 switch for another reicever

i have Two Diseq

What is the best configuration to make everything work?

I can get to the receiver with three cables.

Disegno

Attached above is the drawing

I installed openpli-enigma2-5-spark_20170329.zip by TAAPAT with USB and it worked again.

Installation with usb is difficult, try and try again and try again. Then update started.

Thank You

Yes but which file do I download?

Hi

I have Edison Argus Pingulux Mini .

Probably due to a wrong software update, now the receiver starts and displays the TRUMAN start screen and then writes IDENT ERROR- STB MODEL! and stops with the writing flashing.

i have flash "spark 7111rescue imange.zip", Accepts the software but then flashes again what I wrote above.

I don't know what else to do. Am I getting ready to throw it away?

Thank you

C'è un mondo la leggere,cosa sai?

cosa vuoi vedere?free o non free?

There is a world to read, what do you know?

what do you want to see? free or non free?

Nessuno puo' risponderti ,ci sarebbe un manulae di 100 pagine da scrivere

There is a world to read, what do you know?

what do you want to see? free or non free?Nobody can answer, there would be a 100 page manual to write

Work on Dream Elite?

Not the right path. Follow the discussions in the dedicated part of Dreamelite here on the forum

Quote from jhon32

Quote from wgsjsfhj

Hi,

New image 7.0 for dreambox 920 always crashes when I do the following path Menu --- Configuration-software management-software update. Do an update and then it always starts crashing.

Need to reinstall the image all over again.

TRY ,disable skin , on this version have problems with de skin

Skin is the default of the image.No extra skins installed. But if you don't update the software from the menu, the image works perfectly

Quote from jhon32

Quote from wgsjsfhj

Excuse me is Dream Elite 7.1

now is ok ?

If don't update the software from the menu, the image works perfectly

Excuse me is Dream Elite 7.1

Hi,

New image 7.0 for dreambox 920 always crashes when I do the following path Menu --- Configuration-software management-software update. Do an update and then it always starts crashing.

Need to reinstall the image all over again.

If you are using for FTP WINSCP software,you cannot install the .cfg file correctly !!

I went crazy for some time at the end I worked with Filezilla and the cfg file reappeared correctly

If you are using WINSCP software,you cannot install the .cfg file correctly !! I went crazy for some time at the end I worked with Filezilla and the cfg file reappeared correctly

I have see that cccam work perfect with Extra feed.

Da me cambiando fornitore va sia con CCCam che Oscam

Quote from lakosta

Just change THIS ONE code in oscam server and workS perfect..

disablecrccws_only_for = 0E00:000000;0500:050F00;09C4:000000;098C:000000;098D:000000

Oscam server??????

I understand put in oscam config