how to fix?
Python
<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Sat Jan 1 01:04:47 2000</crashdate>
<compiledate>Jun 12 2013</compiledate>
<contactemail>somebody who cares</contactemail>
<!-- Please email this crashlog to above address -->
<skin>PKT_RedHD/skin.xml</skin>
<sourcedate>2013-05-10</sourcedate>
<branch>(no branch)</branch>
<rev>20a5a1f</rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>spark7162</stbmodel>
<kernelversion>
<![CDATA[
Linux spark7162 2.6.32.59_stm24_0211 #1 PREEMPT Wed Jun 12 19:46:08 CEST 2013 sh4 GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=ttyAS1,115200 rw root=/dev/mtdblock6 rootfstype=jffs2 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:Enigma2:eth0:off stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 nwhwconf=device:eth0,hwaddr:30:00:0A:00:26:E4 Manufacture=Spark-Project STB_ID=0C:00:0A:00:00:26:E4</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=0270201209300000
]]>
</imageversion>
<imageissue>
<!-- No such file or directory -->
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions down
down
action -> WizardActions right
right
action -> WizardActions right
right
action -> WizardActions right
right
action -> WizardActions left
left
action -> WizardActions left
left
action -> WizardActions down
down
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
MATRIX
LNB
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions right
Creating setup
right
action -> WizardActions left
Creating setup
left
action -> WizardActions left
Creating setup
left
action -> WizardActions up
up
action -> WizardActions up
up
action -> WizardActions up
up
action -> WizardActions up
up
action -> WizardActions right
Creating setup
right
action -> WizardActions ok
OK
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Dummy DVB-T, need rotorworkaround No, enabled No, DVB-S2 No
setSlotInfo for dvb frontend 1 to slotid 1, descr Tuner1-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled No, DVB-S2 Yes
slot: 1 configmode: simple
diseqcmode: single
slot: 2 configmode: nothing
sec config completed
finished
Updating values in step 9
playing None
keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
Updating values in step 10
keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
Updating values in step 11
wizard step: {'code': u'self.hideRc()', 'text': 'Do you want to do a service scan?', 'id': 'scanquestion', 'condition': u'from Components.NimManager import nimmanager\nself.condition = nimmanager.somethingConnected() and not config.misc.installwizard.channellistdownloaded.value', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('No', 'softcam'), ('Yes, do an automatic scan now', 'scan'), ('Yes, do a manual scan now', 'manualscan')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Effettuare una ricerca canali?
code self.hideRc()
showing list, 11
self.list: <Components.Sources.List.List object at 0x1b965ec>
self.list: <Components.Sources.List.List object at 0x1b965ec>
setZPosition
showing config
Now: 11
Now: 11
action -> WizardActions ok
OK
finished
current: ('No', 'softcam')
getStepWithID: softcam
result: 14
Updating values in step 15
keys*******************: ['code', 'text', 'id', 'condition', 'timeoutaction', 'nextstep', 'code_async', 'codeafter_async', 'timeoutstep', 'list', 'timeout', 'codeafter', 'config']
Updating values in step 16
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard. Your receiver is now ready for use.\nPress OK to start using your receiver.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}, 'laststep': 'true'}
wizard text Il ricevitore è ora pronto per essere utilizzato./nOK >> continuare.
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 16
self.list: <Components.Sources.List.List object at 0x1b965ec>
self.list: <Components.Sources.List.List object at 0x1b965ec>
setZPosition
showing config
Now: 16
Now: 16
action -> WizardActions ok
OK
finished
wizard finished
Now: 16
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/NetworkWizard/networkwizard.xml']
getStepWithID: start
result: nothing
('it_IT', ('Italiano', 'it', 'IT'))
[SKIN] Parsing embedded skin <embedded-in-'NetworkWizard'>
WizardCreateSummary
Updating values in step 1
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Welcome.\n\nIf you want to connect your receiver to the Internet, this wizard will guide you through the basic network setup of your receiver.\n\nPress OK to start configuring your network', 'displaytext': 'Network wizard', 'id': 'welcome', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.selectInterface()', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Benvenuti.
Se si desidera collegare il ricevitore a internet, questa procedura guidata fornirà supporto nella configurazione di rete del ricevitore.
Ok >> Iniziare la configurazione della rete.
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 1
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
action -> WizardActions ok
OK
finished
code self.selectInterface()
getStepWithID: nwconfig
result: 2
Updating values in step 3
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")\nself.selectKey("UP")\nself.selectKey("DOWN")\nself.selectKey("LEFT")\nself.selectKey("RIGHT")', 'text': 'Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue.', 'displaytext': 'Configure interface', 'id': 'nwconfig', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.AdapterSetupEnd(self.selectedInterface)', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.NetworkSetup.AdapterSetup'>, 'args': 'self.selectedInterface', 'type': 'ConfigList'}}
wizard text Configurare la connessione a Internet inserendo i parametri richiesti.
Quando pronti, premere OK per continuare.
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
self.selectKey("UP")
self.selectKey("DOWN")
self.selectKey("LEFT")
self.selectKey("RIGHT")
selectPic: arrowup
selectPic: arrowdown
selectPic: arrowup2
showing list, 3
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
wizard screen <class 'Screens.NetworkSetup.AdapterSetup'>
warning, skin is missing element HelpWindow in <class 'Screens.NetworkSetup.AdapterSetup'>
clearConfigList <Components.ConfigList.ConfigList object at 0x20b1ecc> <Components.ConfigList.ConfigList object at 0x20b196c>
clearConfigList <Components.ConfigList.ConfigList object at 0x20b196c> <Components.ConfigList.ConfigList object at 0x20b196c>
Now: 3
Now: 3
action -> WizardActions down
down
action -> WizardActions right
right
action -> WizardActions ok
OK
action -> MsgBoxActions ok
setting for adapter eth0 attribute up to value True
setting for adapter eth0 attribute dhcp to value True
setting for adapter eth0 attribute ip to value [0, 0, 0, 0]
setting for adapter eth0 attribute netmask to value [0, 0, 0, 0]
setting for adapter eth0 attribute gateway to value [0, 0, 0, 0]
[OpenWebif] Stopping server on port 80
[OpenWebif] Stopping server on port 443
[ePopen] command: /etc/init.d/avahi-daemon stop
child has terminated
pipes closed
[eBatch] retval=127, cmds left=7, data:
/bin/sh: /etc/init.d/avahi-daemon: not found
[ePopen] command: ifdown eth0
poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=6, data:
ifdown: interface eth0 not configured
[ePopen] command: ip addr flush dev eth0
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=5, data:
[ePopen] command: /etc/init.d/networking stop
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=4, data:
Deconfiguring network interfaces... done.
[ePopen] command: killall -9 udhcpc
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=1, cmds left=3, data:
killall: udhcpc: no process killed
[ePopen] command: rm /var/run/udhcpc*
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=1, cmds left=2, data:
rm: can't remove '/var/run/udhcpc*': No such file or directory
[ePopen] command: /etc/init.d/networking start
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=1, data:
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... udhcpc (v1.21.0) started
Sending discover...
Sending discover...
Sending select for 192.168.1.2...
Lease of 192.168.1.2 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 8.8.8.8
adding dns 8.8.4.4
udhcpc (v1.21.0) started
Sending discover...
Sending select for 192.168.1.2...
Lease of 192.168.1.2 obtained, lease time 86400
route: SIOCDELRT: No such process
adding dns 8.8.8.8
adding dns 8.8.4.4
done.
[ePopen] command: /etc/init.d/avahi-daemon start
child has terminated
pipes closed
[eBatch] retval=127, cmds left=0, data:
/bin/sh: /etc/init.d/avahi-daemon: not found
[ePopen] command: ip -o addr show dev eth0
poll: unhandled POLLERR/HUP/NVAL for fd 33(17)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[8, 8, 8, 8], [8, 8, 4, 4]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 2], 'up': True, 'mac': '30:00:0a:00:26:e4', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
action -> MsgBoxActions ok
finished
code self.AdapterSetupEnd(self.selectedInterface)
[ePopen] command: ping -c 1 [url=http://www.openpli.org]OpenPLi - Open Source Set-Top Box Software[/url]
[ePopen] command: ping -c 1 [url=http://www.google.nl]Google[/url]
[ePopen] command: ping -c 1 [url=http://www.google.com]Google[/url]
Now: 3
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
getStepWithID: checklanstatusend
result: 4
Updating values in step 5
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Your receiver is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue.', 'displaytext': 'Please follow the instructions on the TV', 'id': 'checklanstatusend', 'condition': u'self.condition = (self.InterfaceState == True )', 'timeoutaction': 'nextpage', 'nextstep': 'end', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': u'currStep = self.numSteps \nself.wizard[currStep]['nextstep'] = None\nself.markDone()\nself.close()', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Il ricevitore è pronto per l'uso.
La connessione a Internet è attiva.
Ok >> Continuare
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 5
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
Now: 5
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
action -> WizardActions ok
OK
finished
code currStep = self.numSteps
self.wizard[currStep]['nextstep'] = None
self.markDone()
self.close()
getStepWithID: end
result: 13
Updating values in step 14
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard.\nPlease press OK to continue.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Grazie per aver utilizzato questa configurazione guidata.
Premere OK per continuare.
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 14
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
setZPosition
self.list: <Components.Sources.List.List object at 0x20b19ec>
self.list: <Components.Sources.List.List object at 0x20b19ec>
showing config
Now: 14
Now: 14
[Picon] adding path: /usr/share/enigma2/picon/
[ePNG] couldn't open /usr/local/share/enigma2/PKT_RedHD/progress_small.png
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
[SKIN] No skin to read...
[SKIN] No skin to read...
warning, skin is missing element UnhandledKeyPixmap in <class 'Screens.UnhandledKey.UnhandledKey'>
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
action -> OkCancelActions cancel
action -> InfobarMenuActions mainMenu
TimerEdit TimerEditList
PluginBrowser PluginBrowser
action -> OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
action -> OkCancelActions ok
okbuttonClick
Satconfig NimSelection
ScanSetup ScanSimple
ScanSetup ScanSetup
action -> OkCancelActions ok
okbuttonClick
action -> MsgBoxActions ok
[SKIN] Parsing embedded skin <embedded-in-'SecParameterSetup'>
action -> SetupActions cancel
action -> OkCancelActions cancel
action -> OkCancelActions cancel
action -> OkCancelActions ok
okbuttonClick
action -> WizardActions back
action -> OkCancelActions ok
okbuttonClick
[SKIN] Parsing embedded skin <embedded-in-'BPanel'>
action -> WizardActions down
action -> WizardActions down
action -> WizardActions down
action -> WizardActions right
action -> WizardActions right
action -> WizardActions right
action -> WizardActions down
action -> WizardActions down
action -> WizardActions ok
[SKIN] Parsing embedded skin <embedded-in-'ScreenEmu'>
warning, skin is missing element defaultCAM in <class 'Plugins.Extensions.EMUmanager.plugin.ScreenEmu'>
warning, skin is missing element config in <class 'Plugins.Extensions.EMUmanager.plugin.ScreenEmu'>
No watching file at time: 2000-01-01 00:04:41
No watching file at time: 2000-01-01 00:04:41
No watching file at time: 2000-01-01 00:04:42
No watching file at time: 2000-01-01 00:04:42
No watching file at time: 2000-01-01 00:04:43
action -> DirectionActions right
No watching file at time: 2000-01-01 00:04:43
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
No watching file at time: 2000-01-01 00:04:44
No watching file at time: 2000-01-01 00:04:44
No watching file at time: 2000-01-01 00:04:45
No watching file at time: 2000-01-01 00:04:45
No watching file at time: 2000-01-01 00:04:46
No watching file at time: 2000-01-01 00:04:46
No watching file at time: 2000-01-01 00:04:47
action -> OkCancelActions cancel
-------
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
