Posts by mckee25

Are they both originals buddy? if they are clones you will see a sticker on the rear or under side stating what version they are...

Re-format the usb stick you use to fat32 again, then place the folder which contains the image you want to flash on it, it should be named "vuplus"

That's all that should be on there, if there is anything else delete it, then make sure no other devices are connected to any of the usb ports on your duo.

The channel list that is installed on your box now will need to include thor 1w for you to be able to setup 1w on your motorised dish, how did you install the channels for the sats you already have setup?

Well done buddy, I will close this thread now.

Has your channel list got thor 1w included in it buddy???

Hello buddy,there is no change with this image regards where you would place your cam config files..

Hello buddy,

Your first post should be here: Introductions

Then you need to read our forum rules, especially the one's regarding using payservers / portals

:taxman:

yes I would try going back to 2.1.3 just to see if it does resolve the issue you are having. I would remove 2.3.0 first buddy then install 2.1.3

The line you have posted for your smartcard frequency is correct.

Might be worth your while running a manual scan on 28.2e buddy, there have been so many changes in the last week...

@ andrewcropper,

You forgot something buddy: Introductions

Huevos, you have forgotten something buddy:

Introductions

:taxman:

These are the instructions I found to set a static ip addy for a device:

goto http://192.168.0.1 username: admin password: changeme click on ok press on advanced setttings press yes/ok goto DHCP Reservation you can setup static Ip's

Hello buddy, all fine here after using the ipk kindly uploaded by cazuela in post #10.

Only disable it when you have checked your router settings buddy, just in case there is a ip conflict.... in your router you should be able to fix the ip addy you want to keep the duo on.

Might be worth your while making a post here bud:

http://linuxsat-support.com/vip-i-have-no-local/

Why not go for a cheap porn card or something buddy, at least you would have something to share with..... it's a lot easier to exchange a share if you have something to give in return. Also you could state that you will accept a line with no reshare, at least your peer would know that you are the only person they are sharing with.

Have a look here bud at the various tutorials:

Tuner Support

ok, press menu, then select plugins. Then press the red button to remove plugins, select Ts Panel from this list.

What image have you got on your box buddy???

Edit your reader to this:

blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1

I am using these setting on a FTV card myself, it has never failed to update...