Posts by markmcm

I have oscam running on windows ok but I cant get oscam to detect my omnikey what are the configs for my oscam.server for windows and a omnikey.

how do I configure my oscam.server file for windows oscam and omnikey card reader

it wasnt broke i just upgraded from dm500s till ubuntu server with two omnikeys. ive updated oscam still no joy i also subed to Chelsea tv today and still no au active am i doomed when my entitlements run out . also changed emm cache = 1,3,2

ok having problems. i have upgraded my two dm500s till taptop with ubuntu12 oscam8916 and two omnikeys. ever sine i done this my au dosnt update my cards.

oscam.server

[reader]
label = reader-1
protocol = pcsc
device = 0
caid = 0963
detect = cd
mhz = 357
ident = 0963:000000
group = 1
emmcache = 1,3,32
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

[reader]
label = reader-2
protocol = pcsc
device = 1
caid = 0963
detect = cd
mhz = 357
ident = 0963:000000
group = 2
emmcache = 1,3,32
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

oscam.conf

[global]
nice = -1
waitforcards = 1
logfile = stdout
maxlogsize = 20
preferlocalcards = 1
saveinithistory=1
lb_mode = 1

[monitor]
port = xxx
nocrypt = 127.0.0.1
aulow = 120
monlevel = 1
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = dreambox

[cs357x]
port = 2xxxx

[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = xxxx
httpuser = xxxx
httppwd = xxxxxxxx
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255,127.0.0.1

oscam.user

[account]
user = local-user
pwd = local-pass
description = Update Entitlements
group = 1,2
au = reader-2
caid = 0963
cccignorereshare = 0
keepalive = 1

[account]
user = dvbapi
boxtype = dreambox
au = reader-1,reader-2
group = 1,2

[account]
user = user
pwd = user
caid = 0963
au = reader-1
group = 1,2

i order the fight at weekend with these configs and didnt get it raging. entitlements up soon. please help if tried alot of different configs and different cams changing pin on sly website

can some one please help lol. i recently upgraded my readers till two omnikeys 3121. but now in oscam i get higher ecm like 90ms till 120ms. can some point me in the right place to help configs to get these dwn. my previous readers were two dm500s which give me ecms of 80-90ms

ok peep i was using dm500s a server for some time now. today my omnikey came so i set up ubuntu server with oscam installed my problem is omnikey is giving higher ecm time than dm500 heres my configs.

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
keepalive = 1

[webif]
httpport = xxxx
httpuser = xxxx
httppwd = password
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255,127.0.0.1

oscam.server

[reader]
label = one
protocol = pcsc
device = 0
caid = 0963
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

oscam.user

[account]
user = local-user
pwd = local-pass
caid = 0963
au = reader-2
group = 1
cccignorereshare = 0

were am i going wrong

lol card was in the omnikey the wrong way hahahaha. please close the thread if you want

yes ive install omnikey readers using that tut. i install oscam using the tut in pc server tuts. got oscam web interface. this is the error i get. and thanks for you reply's much appreciated

2013/11/13 09:39:40 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8916 (i686-linux-gnu-libusb-pcsc)
2013/11/13 09:39:40 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3694
2013/11/13 09:39:40 0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2013/11/13 09:39:40 0 s signal handling initialized
2013/11/13 09:39:40 0 s cccam: initialized (fd=5, port=13013)
2013/11/13 09:39:40 0 s reader-2 [pcsc] creating thread for device 0
2013/11/13 09:39:40 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/11/13 09:39:40 0 s waiting for local card init
2013/11/13 09:39:40 9FF7B40 r reader-2 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2013/11/13 09:39:40 B7100468 h webif: decompressed 53268 bytes back into 152828 bytes
2013/11/13 09:39:40 B7100468 h HTTP Server running. ip=0.0.0.0 port=8888
2013/11/13 09:39:41 9FF7B40 r reader-2 [pcsc] Error getting card status.
2013/11/13 09:39:42 0 s init for all local cards done
2013/11/13 09:39:42 0 s anti cascading disabled
2013/11/13 09:39:42 9FF7B40 r reader-2 [pcsc] Error getting card status

can someone help me with this ive tryied everything

no mate xxxuk 0963 im using

sorry that is what i had in

[reader]
label = reader-2
protocol = pcsc
device = 0 and /004/002
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,31
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1

as i say oscam can see the reader just error getting card status

[reader]
label = reader-2
protocol = omnikey-bis
device = 0 and /004/002
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,31
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1

oscam can see the reader just error getting card status. im stuck.

i have just freshly installed ubuntu and oscam on my pc using omnikey. everything is running ok but oscam problem getting card status

2013/11/12 22:46:55 9DAE508 r Omnikey_Bis [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2013/11/12 22:46:55 B7200468 h webif: decompressed 53268 bytes back into 152828 bytes
2013/11/12 22:46:55 B7200468 h HTTP Server running. ip=0.0.0.0 port=8888
2013/11/12 22:46:56 9DAE508 r Omnikey_Bis [pcsc] Error getting card status.
2013/11/12 22:46:56 0 s init for all local cards done
2013/11/12 22:46:56 0 s anti cascading disabled
2013/11/12 22:46:57 9DAE508 r Omnikey_Bis [pcsc] Error getting card status.

hi all, is there a way to get the on demand plugin for dm800hd as i keep gettin no module name also the same with media portal plugin please some expert help me as i am a noob lol. thanks

i am using open pli image on clone dm800hd ssl84b. is there any other way to do this even with the plugins saved on my hdd

does anybody on forum no who this can be achieved please help me lol.

hi all ive recently seen people have got there plugins save on there usb stick saving flash memory from getting full can someone please shed some liught on how this is done.