Posts by bady

  • remote reader = no matching reader

    Quote from musogeek

    So to get this right - you are sending your local card to remote server (vps?) and you are trying to connect to UserOscamB account you set up on Oscam B (remote server) - You have set up port 40000 for the newcamd and 12000 for CCcam protocol on the remote server. You need to have these ports open on your remote server to connect to to these ports from outside so I assume you have done this?


    exactly!!!, vps with all ports open, local server too, but i dont understand one thing, why use CCcam??, i see a config like that in this forum, but i dont understand why newcamd and CCcam must be enabled on remote (well, newcamd obviously, but why cccam?)


    thx

  • remote reader = no matching reader

    today i try new thinks but nothing yet, OSCAM A (local) works fine, the problem is on oscam B (remote), oscam B shows rejected group (0 ms) (0/0/0/0) (no matching reader) and doesnt make the petition to oscam A, so oscam A doesnt show any log, cause the problem probably is on oscam B, oscam B doesnt make petitions to reader on oscam A

  • remote reader = no matching reader

    hi dudes :D, i have a litle problem:


    i have my local conax card on a debian using pcsc, lets call it OSCAM A, and i have an oscam B as remote server, here my config:


    OSCAM A (local)
    oscam.conf


    oscam.server


    oscam.user


    my oscam B (remote)



    oscam.server


    oscam.user

    Code
    [account]
user                          = UserOscamB
pwd                           = PassOscamB
caid                          = 0B00
group                         = 1
ident                         = 0B00:000000


    if i conect to my local (oscam a) using the "local" user it works PERFECT!, but if i conect to remote oscam (oscam B), using UserOscamB it shows


    Code
    UserOscamB (0B00&000000/0000/000D/47:EE6ED32A3C88776719FE5BF39E804B2B): rejected group (0 ms) (0/0/0/0) (no matching reader)


    besides, the remote server (oscam B) conects OK to oscam A (local)


    Code
    2013/03/01 01:43:04   D10A60 p proxy *.dyndns.tv:10000 newcamd525 (fd=0)
2013/03/01 01:43:04        0 s waiting for local card init
2013/03/01 01:43:04   D10A60 p *.dyndns.tv: resolved ip=200.*.*.*
2013/03/01 01:43:04   D10A60 p local [newcamd] connecting to *.dyndns.tv:10000
2013/03/01 01:43:04        0 s init for all local cards done
2013/03/01 01:43:04        0 s anti cascading disabled
2013/03/01 01:43:04   D10A60 p Newcamd Server: *.dyndns.tv:10000 - UserID: 11
2013/03/01 01:43:04   D10A60 p CAID: 0B00 - UA: 0000000000000000 - Provider # 1
2013/03/01 01:43:04   D10A60 p Provider ID: 000000 - SA: 00000000
2013/03/01 01:43:04   D10A60 p local [newcamd] proxy initialized, server *.dyndns.tv:10000


    what is the problem?, any help??


    thx!

  • Oscam cache timeout :S

    hi people :D, i have 2 identical nagra cards and 2 3121 USB omnikey readers on a debian squeeze pentium II PC with lbmode = 1, i have like 8 peers (family), the ecm times are really good, like 300-500 ms ALWAYS, how ever, some times and RANDOMLY the log shows a lot of timeouts at the same TIME And the SAME CHANNEL, here the log:



    2012/11/25 23:28:23 B61DC220 c family 1 (18xx&00Xxxx/0000/007A/89:3AF7): timeout (5000 ms) (F/0/1/2) - C 13
    2012/11/25 23:28:23 B64D3CE0 c family 2 (18xx&00Xxxx/0000/007A/89:3AF7): timeout (5000 ms) (F/0/1/2) - C 13
    2012/11/25 23:28:23 B6149F28 c family 3 (18xx&00Xxxx/0000/007A/89:3AF7): timeout (5000 ms) (F/0/1/2) - C 13
    2012/11/25 23:28:23 B66F4CA8 c family 4 (18xx&00xxxx/0000/007A/89:3AF7): timeout (5000 ms) (F/0/1/2) - C 13



    another:


    2012/11/25 23:33:23 B61C90C0 c family 1(18xx&00xxxx/0000/0191/89:F24B): found (436 ms) by movi6 (L/1/1/2) - Cnn
    2012/11/25 23:33:23 B5634730 c WARNING: invalid client
    2012/11/25 23:33:23 B5634730 c anonymous disconnected from 186.xxxxx
    2012/11/25 23:33:23 12766108 c family 2 (18xx&00Xxxx/0000/0077/89:6EEE): timeout (5000 ms) (F/0/1/2) - TV
    2012/11/25 23:33:23 B61768A0 c family 3 (18xx&00Xxxx/0000/0077/89:6EEE): timeout (5000 ms) (F/0/1/2) - TV
    2012/11/25 23:33:23 17786F70 c family 4 (18xx&00Xxxx/0000/0079/89:73EB): timeout (5000 ms) (F/0/1/2) - CH
    2012/11/25 23:33:23 B663B448 c family 5 (18xx&00Xxxx/0000/0079/89:73EB): timeout (5000 ms) (F/0/1/2) - CH
    2012/11/25 23:33:23 B64F57A0 c WARNING: invalid client
    2012/11/25 23:33:23 B64F57A0 c family 6 disconnected from 200.xxxxx
    2012/11/25 23:33:23 B66CCD60 c family 7 (18xx&00Xxxx/0000/0079/89:73EB): timeout (5000 ms) (F/0/1/2) - CH
    2012/11/25 23:33:23 B61476C8 c family 8 (18xx&00xxxx/0000/0077/89:6EEE): timeout (5000 ms) (F/0/1/2) - TV
    2012/11/25 23:33:23 177C8480 c family 9 (18xx&00xxxx/0000/0079/89:73EB): timeout (5000 ms) (F/0/1/2) - CH



    Chek the date, always at the same time, and noticed:


    THE TIMEOUTS ONLY happens on CACHED ECM, NEVER in other way, only with cached ECM, never when request goes to the card, any help??,, ¿could be a internet bandwith problem? or something like that?


    here the config:


    # oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7838
    # Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt


    [global]
    loghistorysize = 2048
    serverip = 192.168.1.110
    logfile = /home/cs/oscam.log
    fallbacktimeout = 2900
    clientmaxidle = 300
    sleep = 300
    nice = -20
    maxlogsize = 10000
    preferlocalcards = 1
    dropdups = 1
    cacheexwaittime = 0
    cwlogdir = /home/cs/cw.log
    emmlogdir = /home/cs/emm.log
    lb_mode = 1
    lb_save = 5000
    lb_max_ecmcount = 5000
    lb_stat_cleanup = 12
    lb_reopen_mode = 1
    lb_auto_betatunnel = 0
    lb_auto_betatunnel_prefer_beta= 0
    lb_savepath = /home/cs/balance.log
    failbantime = 60
    failbancount = 2
    max_cache_time = 10
    max_cache_count = 1000


    [newcamd]
    port = 10000@18xx:00xxxx
    serverip = 192.168.1.110
    allowed = 0.0.0.0-255.255.255.255
    key = 0102030405060708091011121314


    [webif]
    httpport = 8009
    httpuser = webuser
    httppwd = webpass
    httpallowed = 127.0.0.1,50.0.0.0-255.255.255.255
    appendchaninfo = 1


    [account]
    user = family
    pwd = family
    caid = 18xx
    uniq = 3
    group = 1
    ident = 18xx:00xxxx
    cccmaxhops = 0
    cccreshare = 0


    # oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7838
    # Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt


    [reader]
    label = nagra
    protocol = pcsc
    device = 0
    caid = 18xx
    rsakey = xx
    boxkey = Xx
    detect = cd
    mhz = 357
    cardmhz = 357
    ident = 18xx:00Xxxx
    group = 1
    emmcache = 1,3,15
    blockemm-unknown = 1
    blockemm-g = 1


    [reader]
    label = nagra2
    protocol = pcsc
    device = 1
    caid = 18xx
    rsakey = xx
    boxkey = xx
    detect = cd
    mhz = 357
    cardmhz = 357
    ident = 18xx:00xxxx
    group = 1
    emmcache = 1,3,15
    blockemm-unknown = 1
    blockemm-g = 1

  • OScam load balance, lb_mode 1 or 3??


    thx, i have 2 local readers, in lb mode 3 is working really good

  • OScam load balance, lb_mode 1 or 3??

    hi people, i have 2 identical nagra cards, i am testing now with lb_mode 3, is better than 1??, how its work lb_mode 1??, on lb_mode 3 both cards receiv aprox the same ecm request, i do not understand the lb mode 1 function (already read the wiki)


    my config:


    lb_mode = 3
    lb_save = 10000
    lb_nbest_readers = 2
    lb_nbest_percaid = 1810:2
    lb_savepath = /home/cs/balance.log


    thx!

  • oscam really really hich ecm times

    hi people :D, i have a nagra card and a conax card, i use oscam to read both cards, i have 2 omnikeys 3121 USB, the ecm times of conax card are pretty good, like 100-300 ms, but the ecm times of nagra card are really high, like 3000-4000 ms :/, i have no idea about what cut be the problem or waht can i do, i try sbox too for read the nagra card, the ecm times on sbox are like 300-400 ms, how ever, when i setup oscam as a "remote reader" (using sbox) the ecm times again are pretty high. 2000-3000 ms


    another thing: even the CACHE ecm times are high using oscam (3000-4000 ms)



    example:


    2012/08/26 22:46:42 9FD96D8 c test1(1861&007311/0000/032D/89:05C1): found by nagra (2696ms) - sport
    2012/08/26 22:46:42 9FC4878 c test2 (1861&007311/0000/032D/89:05C1): cache2 (2659ms) by nagra- sport



    reader:



    [reader]
    label = nagra
    protocol = pcsc
    device = 0
    caid = 1861
    rsakey = xxxx
    boxkey = xxxxx
    detect = cd
    mhz = 1000
    cardmhz = 500
    ident = 1861:007311
    group = 1
    emmcache = 1,3,15
    blockemm-unknown = 1
    blockemm-g = 1


    thx !!!


    ps: i forgot a lot of details. I am using debian squeeze