Posts by ks2013

  • How to flash the Vu+ SoloSE V2 via USB

    Hi,


    Can someone advise how I flash the Vu+ Solo SE V2 via USB.


    I have the USB stick formatted in FAT32
    vu plus folder copied (as normal) to the USB stick.
    Switched off the box
    Plugged in the USB stick to the port on the back (tried both of these)
    Switch the box on
    The USB flashes for a second then the box boots as normal without flashing.


    Am I missing a trick here and is there a different method for flashing this box?


    Thanks


    - - - Updated - - -


    Found this so it seems like I was trying to do it right but there was a problem with the files in the image I was using. Tried again with a different image and it seems to have worked.


  • Few questions on the OBH 0.1

  • Few questions on the OBH 0.1

    Hi


    I have tried to install Kodi and the python required. This gave me a "No Space Left of device" message so I rolled back and flashed the box to the OBH backup from Honcho in case this was just a space issue. Even after rolling it back and trying to install this first I get the below errors. Can someone advise what I am doing wrong or what I need to do to get this installed correctly without running out of space.


    The files I am installing in the tmp directory are:

    • python-imaging_1.1.7-r5_mips32el.ipk
    • enigma2-plugin-extensions-kodidirect_2.0-r32-20150728_all.ipk
    • python-image_2.7.3-r0.3_mips32el.ipk



  • Few questions on the OBH 0.1

    Hi,


    I have a few support questions on the Open Black Hole 0.1 that I hope someone can help me fix or point me in the right direction.


    1. When I power off the Telly the box also switches off. When the box updated the EPG or channel list during the night it also switches on the telly. The box then goes back into standby by the telly does not. How do I disable the box putting the telly into standby also?


    2. Channel selection issue - At the bottom or the channel selection window (pressing up or down on the remote) there is an option to press 3 to see Multi EPG. This worked fron on the BH software but now it just takes me to channel 3 on the list rather than opening the EPG.


    3. Enhanced Movie Center - Anyone know how to get this working on this version of the software? I get the [cannot import name EMCCurrentService]


    4. How do I install the .ipk files in the tmp folder now on this image and what is the Linux code to do this via tenet for *.ipk in the folder?


    5. Anyone know how to get XBMC or KODI working on this image as it does not work and Green Screens?


    Thanks


    - - - Updated - - -


    Quote from ks2013

    Hi,
    4. How do I install the .ipk files in the tmp folder now on this image and what is the Linux code to do this via tenet for *.ipk in the folder?
    Thanks


    ipkg install /tmp/*.ipk
    http://linuxsat-support.com/showthread.php?t=31297

  • kodi

    Quote from master G

    What is it you are trying to get working, xbmc launcher or kodidirect ? Which receiver are you using ? How is it not working, what issues are you having ?


    Hey Master


    I am using Vu+Duo. The menu has the XBMCAddons. When I go in to addons all it has is [Exit] and [Exit]. Pressing Blue takes me in to the addon section but there is nothing listed. Yellow takes me in to Software and it has [#### update ####] ...etc. When I choose any of these get a greenscreen. [Crash log attached]


    Just really looking for a guide on what I should and should not be doing with it, what it can do and how I should do it correctly. I tried the 2 forums listed at the bottom of the XBMCAddon but there were of little help to get me off the ground.


    Cheers

  • kodi

    The Open Black Hole 0.1 has it installed but I cannot seem to get it working at all. Any pointers to guides for getting it working correctly?

  • Autobouques - Enigma2 Crashlog

    Hi, I have AutoBouquets E2 (Version:20/10/13) and it is set to Grampain HD as area.


    Firstly I do not seem to get getting the correct channel listing for Grampain. It seems to give me UTV instead of STV and also 117 which was STV HD seems to also now be missing.


    In addition to this the auto update is set for 0300H every morning and causes the system to crash. Below is the crash log. Can anyone advise how to resolve both these issues?


    Thanks


  • Removing Narrator from Audio Track on BH 2.0.7

    I am looking for someone to advise me how I can fix the problem I have with the narrator audio when I change channel.


    When I change the channel it is defaulting to the NAR audio (where the channel has it) as below. I need to change this every time I change the channel.


    I have also looked and changed the seetings mentioned in other posts on this forum to fix it with other images but this does not work for me


    Any help appreciated.


    Image Black Hole 2.0.7



  • How to format HDD in Vu+ Duo

    root@bm750:~# df -h
    Filesystem Size Used Available Use% Mounted on
    ubi0:rootfs 102.1M 102.1M 4.0K 100% /
    tmpfs 67.6M 284.0K 67.3M 0% /var/volatile
    udev 2.0M 88.0K 1.9M 4% /dev
    /dev/mtdblock2 2.0M 388.0K 1.6M 19% /boot
    tmpfs 67.6M 0 67.6M 0% /dev/shm
    /dev/sda1 458.5G 367.2M 434.8G 0% /media/hdd


    root@bm750:~# cat /proc/meminfo
    MemTotal: 138492 kB
    MemFree: 3500 kB
    Buffers: 928 kB
    Cached: 60376 kB
    SwapCached: 0 kB
    Active: 57916 kB
    Inactive: 52700 kB
    Active(anon): 49424 kB
    Inactive(anon): 260 kB
    Active(file): 8492 kB
    Inactive(file): 52440 kB
    Unevictable: 0 kB
    Mlocked: 0 kB
    SwapTotal: 0 kB
    SwapFree: 0 kB
    Dirty: 0 kB
    Writeback: 0 kB
    AnonPages: 49356 kB
    Mapped: 14400 kB
    Shmem: 372 kB
    Slab: 12320 kB
    SReclaimable: 3736 kB
    SUnreclaim: 8584 kB
    KernelStack: 984 kB
    PageTables: 620 kB
    NFS_Unstable: 0 kB
    Bounce: 0 kB
    WritebackTmp: 0 kB
    CommitLimit: 69244 kB
    Committed_AS: 361836 kB
    VmallocTotal: 1034164 kB
    VmallocUsed: 10400 kB
    VmallocChunk: 1017004 kB
    root@bm750:~#

  • How to format HDD in Vu+ Duo

    Hi,
    I now have my HDD up and running again on the system. I removed the HDD and plugged it in to a PC and USB booted to gparted then re-configured the HDD. Now seems like it is back in the box and reading correctly. The problem I have not is that my box is going to Green Screen when I try to do most thing and it is telling me....IOError: [Errno 28] No space left on device.
    Any ideas how I can clear up the space on the box so I can force re-install the plugs so they correct files are re-installed on the HDD?


    Thanks

  • How to format HDD in Vu+ Duo

    When I try to do the fdisk -l I get the following results.


    root@bm750:~# fdisk -l


    Disk /dev/mtdblock0: 123 MB, 123731968 bytes
    255 heads, 63 sectors/track, 15 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes


    Disk /dev/mtdblock0 doesn't contain a valid partition table


    Disk /dev/mtdblock1: 4 MB, 4194304 bytes
    255 heads, 63 sectors/track, 0 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes


    Disk /dev/mtdblock1 doesn't contain a valid partition table


    Disk /dev/mtdblock2: 2 MB, 2097152 bytes
    255 heads, 63 sectors/track, 0 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes


    Disk /dev/mtdblock2 doesn't contain a valid partition table


    Disk /dev/mtdblock3: 1 MB, 1048576 bytes
    255 heads, 63 sectors/track, 0 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes


    Disk /dev/mtdblock3 doesn't contain a valid partition table


    Disk /dev/mtdblock4: 0 MB, 524288 bytes
    255 heads, 63 sectors/track, 0 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes


    Disk /dev/mtdblock4 doesn't contain a valid partition table


    Disk /dev/mtdblock5: 0 MB, 524288 bytes
    255 heads, 63 sectors/track, 0 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes


    Disk /dev/mtdblock5 doesn't contain a valid partition table


    Disk /dev/mtdblock6: 1 MB, 1048576 bytes
    255 heads, 63 sectors/track, 0 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes


    Disk /dev/mtdblock6 doesn't contain a valid partition table
    Found valid GPT with protective MBR; using GPT


    Disk /dev/sda: 976773168 sectors, 931M
    Logical sector size: 512
    Disk identifier (GUID): 0de90fd1-7abc-44c9-b0a3-db782164e815
    Partition table holds up to 128 entries
    First usable sector is 34, last usable sector is 976773134


    Number Start (sector) End (sector) Size Code Name
    1 2048 976773119 931M 0700 primary


    I have a 500GB HDD in the box.

  • How to format HDD in Vu+ Duo

    Can anyone tell me how to format the HDD in my Vu+ Duo (running BH 2.0.6)?


    I have tried via Menu > Setup > System > Hard Drive > Initialisation but i get the following error: Unable to initalise the hard drive. Error: Creating partition failed.


    Is there a way to do this via telnet and if so can someone advise of the commands?


    Thanks