Posts by balanga

I managed to get Enigma2 installed on my MECOOL KIII Pro a few months ago with thanks to some people here, but I did it by trial and error without documenting the steps... Now I'm not sure which image I should use to boot with. I'm also wondering if there have been any new developments in recent months...

Can anyone tell me where I should download (via wget) the latest vitmod image? Is this it?

http://download1289.mediafire.….k1pro.v6.0.sdcard.img.gz

Will there be any chance that this image will work on my Vigica C90 which uses an Amlogic AML8726-MX CPU?

I found this:-

It looks like an OpenATV Plugin but seems to be built for Octagon SF8008, so maybe it's just a matter of time before a Zgemma version becomes available...

Is it possible to access Netflix from Enigma2? I assume a plugin would be required....

Is it possible to set up a ZGEMMA H7S STB to use a 4G/LTE USB dongle to access the Internet?

SpaceRat

Any ideas as to why I often get: ?

(reader) test-1 [cccam] disconnected: reason rto

I think it wasn't working because I didn't have

group=1

so thanks for pointing that out.

The default cccversion is 2.0.11 - not sure what bearing the version has on performance but changed it to 2.3.2

maxhops defaults to 10, reshare defaults to -1 and keepalive is a checkbox.

I don't understand the significance of these settings, and would appreciate any insight.

But at least I have it working, although my subscribed lines often disconnect... not sure how to tell why...

I'm wondering if I should install a different CAM... there are so many to choose from.... Not really sure what the difference is between oscam-emu oscam-smod oscam-stable and oscam-trunk.... Think I'll give oscam-stable a try and see what happens...

I deleted all the readers and added a 48hr test line (test-3) - C: servercsp.com 17088 Tst5e0683b 5e0683be7b although I also have an emulator 'reader' which seems to get generated automatically:-

[reader]

label = emulator

protocol = emu

device = emulator

disablecrccws_only_for = 0E00:000000

caid = 0500,0604,0E00,1010,1801,2600,2602,2610

detect = cd

ident = 0500:000000,007400,007800,021110,023800;0604:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000

group = 1

emmcache = 2,1,2,1

emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000

Here is my log:-

• 2019/12/27 23:26:29 00000000 s (main) System name = Linux
• 2019/12/27 23:26:29 00000000 s (main) Host name = zgemmah7
• 2019/12/27 23:26:29 00000000 s (main) Release = 4.10.12
• 2019/12/27 23:26:29 00000000 s (main) Version = #1 SMP Mon Jun 3 01:00:42 UTC 2019
• 2019/12/27 23:26:29 00000000 s (main) Machine = armv7l
• 2019/12/27 23:26:29 00000000 s (main) Stb model = h7
• 2019/12/27 23:26:29 00000000 s (main) Stb boxtype = h7
• 2019/12/27 23:26:29 00000000 s (main) creating pidfile /var/tmp/oscam-emu.pid with pid 32354
• 2019/12/27 23:26:29 00000000 s (emu) OSCam-Emu version 798
• 2019/12/27 23:26:29 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2019/12/27 23:26:29 00000000 s (main) signal handling initialized
• 2019/12/27 23:26:29 00000000 s (led) LED support is not active. Can't detect machine type.
• 2019/12/27 23:26:29 00000000 s (net) cccam: initialized (fd=4, port=12000)
• 2019/12/27 23:26:29 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2019/12/27 23:26:29 00000000 s (reader) test-3 [cccam] creating thread for device servercsp.com
• 2019/12/27 23:26:29 00000000 s (main) waiting for local card init
• 2019/12/27 23:26:29 071BC75A r (emu) Stream key delayer initialized
• 2019/12/27 23:26:29 071BC75A r (emu) Stream relay server initialized
• 2019/12/27 23:26:29 071BC75A r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2019/12/27 23:26:29 00000000 (emu) INFO: FFDecsa parallel mode = 32
• 2019/12/27 23:26:29 56F2B9A2 h (webif) webif: decompressed 172581 bytes back into 416640 bytes
• 2019/12/27 23:26:29 56F2B9A2 h (webif) HTTP Server running. ip=:: port=83
• 2019/12/27 23:26:29 7DEA8A3E p (reader) servercsp.com: resolved ip=5.9.233.109
• 2019/12/27 23:26:29 7DEA8A3E p (reader) test-3 [cccam] connecting to servercsp.com:17088
• 2019/12/27 23:26:29 7DEA8A3E p (reader) test-3 [cccam] proxy initialized, server servercsp.com:17088
• 2019/12/27 23:26:30 071BC75A r (reader) emulator [emu] card detected
• 2019/12/27 23:26:31 071BC75A r (reader) emulator [emu] found card system emu
• 2019/12/27 23:26:31 071BC75A r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
• 2019/12/27 23:26:31 071BC75A r (emu) Reading key file: /etc/tuxbox/config/oscam-emu/SoftCam.Key
• 2019/12/27 23:26:31 071BC75A r (emu) WARNING: non-hex value in SoftCam.Key at T 00001FCF 01 99B249DA5EB962OO
• 2019/12/27 23:26:31 071BC75A r (emu) WARNING: non-hex value in SoftCam.Key at T 00001FD1 01 19DEA7FD6DF425OO
• 2019/12/27 23:26:31 071BC75A r (emu) Total keys in memory: W:0 V:6 N:0 I:11 F:0 G:0 P:296 T:66 A:0
• 2019/12/27 23:26:32 00000000 s (main) init for all local cards done
• 2019/12/27 23:26:32 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
• 2019/12/27 23:26:32 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
• 2019/12/27 23:26:32 21460BC3 c (client) plain dvbapi-client granted (dvbapi, au=auto (5 reader))
• 2019/12/27 23:26:32 21460BC3 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
• 2019/12/27 23:26:32 21460BC3 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
• 2019/12/27 23:26:32 21460BC3 c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Invalid argument
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 05F1 PROVID: 032A00
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1803 ECM_PID: 058D PROVID: 000000
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 0655 PROVID: 000000
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 0529 PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 1-4-2010
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1813 ECM_PID: 0529 PROVID: 000068
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0B01 ECM_PID: 0461 PROVID: 000000
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 0B02 ECM_PID: 04C5 PROVID: 000000
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 1884 ECM_PID: 0AA1 PROVID: 000000
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 8 CAID: 186C ECM_PID: 071D PROVID: 000000
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 ecmpid 9 CAID: 06ED ECM_PID: 0781 PROVID: 000000
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 found 10 ECM pids and 7 STREAM pids in CA PMT
• 2019/12/27 23:26:35 21460BC3 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2019/12/27 23:26:39 21460BC3 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2019/12/27 23:27:08 7DEA8A3E p (-) -- Skipped 5 duplicated log lines --
• 2019/12/27 23:27:08 7DEA8A3E p (reader) test-3 [cccam] disconnected: reason inactivity
• 2019/12/27 23:27:09 21460BC3 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2019/12/27 23:28:09 21460BC3 c (-) -- Skipped 11 duplicated log lines --
• 2019/12/27 23:29:09 21460BC3 c (-) -- Skipped 12 duplicated log lines --

I'm posting my oscam.server in which all but the last two readers were automatically generated by the installation. I don't know what they are for or whether they can be deleted. cccambox-1 is my real C:Line and test-1 is my free 48 hr test line.

# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11572-798

# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt

[reader]

label = reader0_sky_v13

enable = 0

protocol = internal

device = /dev/sci0

caid = 09C4

boxid = 596C3056

detect = cd

group = 1

.......

[reader]

label = reader0_sky_v14

enable = 0

protocol = internal

device = /dev/sci0

caid = 098C

boxid = 12345678

detect = cd

group = 1

.......

[reader]

label = reader0_sky_v15

enable = 0

protocol = internal

device = /dev/sci0

caid = 098D

boxid = 12345678

ins7e11 = 14

detect = cd

group = 1

emmcache = 1,3,2,0

blockemm-unknown = 1

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

saveemm-u = 1

disablecrccws = 1

[reader]

label = reader0_hd+_hd01

enable = 0

protocol = internal

device = /dev/sci0

caid = 1830

boxkey = A7642F57BC96D37C

rsakey =

........

[reader]

label = reader0_hd+_hd02

enable = 0

protocol = internal

device = /dev/sci0

caid = 1843

boxkey = A7642F57BC96D37C

rsakey =

......

[reader]

label = reader0_hd+_hd03

enable = 0

protocol = internal

device = /dev/sci0

caid = 1860

boxkey = A7642F57BC96D37C

rsakey = 901E595152E67DFD5B134E1D195C4141B3BB1394A8AF4D6BF1D1085DCC4D9CBA5C73A06ED21FC3556B685498030BB1185766117565E39995EFBF72135C2817B7

mod1 = ...........

[reader]

label = reader0_hd+_hd04

protocol = internal

device = /dev/sci0

caid = 186A

mod1 =

..........

[reader]

label = reader0_srg_via

enable = 0

protocol = internal

device = /dev/sci0

caid = 0500

detect = cd

group = 1

emmcache = 1,3,2,0

[reader]

label = reader0_orf_0d95

enable = 0

protocol = internal

device = /dev/sci0

caid = 0D95

detect = cd

group = 1

emmcache = 1,3,2,0

[reader]

label = reader0_orf_0d98

enable = 0

protocol = internal

device = /dev/sci0

caid = 0D98

needsglobalfirst = 1

detect = cd

group = 1

emmcache = 1,3,2,0

blockemm-g = 1

[reader]

label = reader1_sky_v13

enable = 0

protocol = internal

device = /dev/sci1

caid = 09C4

boxid = 596C3056

detect = cd

group = 1

emmcache = 1,3,2,0

blockemm-unknown = 1

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

saveemm-u = 1

disablecrccws = 1

[reader]

label = reader1_sky_v14

enable = 0

protocol = internal

device = /dev/sci1

caid = 098C

boxid = 12345678

detect = cd

group = 1

emmcache = 1,3,2,0

blockemm-unknown = 1

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

saveemm-u = 1

disablecrccws = 1

[reader]

label = reader1_sky_v15

enable = 0

protocol = internal

device = /dev/sci1

caid = 098D

boxid = 12345678

ins7e11 = 14

detect = cd

group = 1

emmcache = 1,3,2,0

blockemm-unknown = 1

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

saveemm-u = 1

disablecrccws = 1

[reader]

label = reader1_hd+_hd01

enable = 0

protocol = internal

device = /dev/sci1

caid = 1830

boxkey = A7642F57BC96D37C

rsakey = ........

[reader]

label = reader1_hd+_hd02

enable = 0

protocol = internal

device = /dev/sci1

caid = 1843

boxkey = A7642F57BC96D37C

rsakey =

.............

[reader]

label = reader1_hd+_hd03

enable = 0

protocol = internal

device = /dev/sci1

caid = 1860

boxkey = A7642F57BC96D37C

rsakey =

.........

[reader]

label = reader1_srg_via

enable = 0

protocol = internal

device = /dev/sci1

caid = 0500

detect = cd

group = 1

emmcache = 1,3,2,0

[reader]

label = reader1_orf_0d95

enable = 0

protocol = internal

device = /dev/sci1

caid = 0D95

detect = cd

group = 1

emmcache = 1,3,2,0

[reader]

label = reader1_orf_0d98

enable = 0

protocol = internal

device = /dev/sci1

caid = 0D98

needsglobalfirst = 1

detect = cd

group = 1

emmcache = 1,3,2,0

blockemm-g = 1

[reader]

label = line_cccam

enable = 0

protocol = cccam

device = 192.168.0.5,12000

user = user

password = pass

fallback = 1

group = 1

ccckeepalive = 1

[reader]

label = line_camd3

enable = 0

protocol = cs357x

device = 192.168.0.5,35000

user = user

password = password

group = 1

[reader]

label = line_newcamd

enable = 0

protocol = newcamd

device = 192.168.0.5,35000

key = 0102030405060708091011121314

user = user

password = password

fallback = 1

group = 1

[reader]

label = emulator

protocol = emu

device = emulator

disablecrccws_only_for = 0E00:000000

caid = 0500,0604,0E00,1010,1801,2600,2602,2610

detect = cd

ident =

.......

[reader]

label = cccambox-1

description = ***************

protocol = cccam

device = ***************

user = *******

password = **********

inactivitytimeout = 30

I have Oscam installed now but can't get it configured properly...

One error I see is

• (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

I read somewhere that I may need to 'Add the IDENT = line to the reader with the necessary caid and ident'

Here is some context around the error:-

• 2019/12/27 10:19:20 19F941DC c (client) plain dvbapi-client granted (dvbapi, au=auto (26 reader))
• 2019/12/27 10:19:20 19F941DC c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
• 2019/12/27 10:19:20 19F941DC c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
• 2019/12/27 10:19:20 19F941DC c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Invalid argument
• 2019/12/27 10:19:20 19F941DC c (dvbapi) Demuxer 0 found 0 ECM pids and 4 STREAM pids in CA PMT
• 2019/12/27 10:19:37 19F941DC c (dvbapi) Demuxer 0 stopped descrambling for program 1139 (FFFE@FFFFFE:1139 unknown)
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 05F1 PROVID: 032A00
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1803 ECM_PID: 058D PROVID: 000000
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 0655 PROVID: 000000
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0100 ECM_PID: 0529 PROVID: 000068 PBM: FFFFFFFFFFFFFFF DATE: 1-4-2010
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1813 ECM_PID: 0529 PROVID: 000068
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0B01 ECM_PID: 0461 PROVID: 000000
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 6 CAID: 0B02 ECM_PID: 04C5 PROVID: 000000
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 7 CAID: 1884 ECM_PID: 0AA1 PROVID: 000000
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 8 CAID: 186C ECM_PID: 071D PROVID: 000000
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 ecmpid 9 CAID: 06ED ECM_PID: 0781 PROVID: 000000
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 found 10 ECM pids and 7 STREAM pids in CA PMT
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1803 PROVID 000000 ECMPID 058D ANY CHID PMTPID 0034 VPID 0214
• 2019/12/27 10:19:38 19F941DC c (ecm) dvbapi (1803@000000/0000/3DCD/92:F26714BA88E9823DC8D63BA85E44B431): not found (553 ms) by cccambox-1
• 2019/12/27 10:19:38 19F941DC c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 1861 PROVID 000000 ECMPID 0655 ANY CHID PMTPID 0034 VPID 0214
• 2019/12/27 10:19:39 19F941DC c (ecm) dvbapi (1861@000000/0000/3DCD/89:6CCEBF85710A708DB82392819C54E284): not found (115 ms) by cccambox-1

Quote from master G

balanga OpenATV SoftCam Feed

Thanks for the link but is this supposed to work?

wget -O - -q http://updates.mynonpublic.com/oea/feed | bash

I ran the above command through the OpenWebif 'terminal' but have no indication if it did anything....

I've just got a brand new ZGEMMA H7S and have flashed it with OpenATV 6.3 but can't figure out how to configure OSCAM on it... I've looked at various tutorials but not making any progress. Can anyone point me to a simple configuration guide?

I need some help deciding on which Zgemma STB to choose....

I'm looking for used unit which has twin DVB-S2 tuners but am not really sure about all the available options in the many models around.

A link to a guide would be appreciated.

Can anyone tell me what the difference is between oscam-emu and oscam and when to use which?

Having installed Enigma2 on one Android box (MECOOL KIII Pro), I'm wondering if there is any chance of getting it installed on a Vigica C90.

Is it worth trying any existing Android image?

I dug out an old OPENBOX S6000HD which has not been in use for a few years and wanted to bring it up to date. Unfortunately, when I switch it on, it comes up with a Black Hole logo and says 'starting gui' and stops. However I do have telnet access so am able to find out its specification but don't know where to look. Can someone tell me what I have and whether I can install OpenPLI or OpenATV on it?

What do I need to go about building OpenPLI for MECOOL KIII Pro?

ie how do I set up a build system for such a platform?

Is it possible to install MiniSatip on a MECOOL KIII Pro box running Enigma2?

What if I wanted to run oscam on a different machine independently of my STB?