one question, why this oscam "callin´ home? ip from from 172.105.020.139?
You have a change so you don't get bored, it was last time 84.19.76.119
one question, why this oscam "callin´ home? ip from from 172.105.020.139?
You have a change so you don't get bored, it was last time 84.19.76.119
- download the ZIP from the first post
- unpack
- switch your device to Recovery Mode
- enter the IP of your device through a web browser and connect to its Rescue page
- when the Rescue website opens, click on the Firmware upload button
Snímka obrazovky 2024-03-20 175503.png
- click on the Choose File button and select the rootfs-two.tar.bz2 file
- uncheck Backup current settings before flashing and Restore settings after flashing
Snímka obrazovky 2024-03-20 181047.png
- click the GO! and wait about 2 minutes, do not close the page !
Snímka obrazovky 2024-03-20 181956.png
- when the new system is uploaded, click on the Click here to reboot button at the bottom of the page
- and just wait until the device restarts and the new system starts up
@gigafox72 - Kodi is unreliable on Enigma2. Something works, something doesn't.
Do you think I make it up and "paint" pictures based on that ?
@juanitoxxxl - The server is currently having problems, try again later.
I use Total Commander, and as you can see from the screenshot, the given image is saved in the /home/root/ directory,
and when I look at it, I can clearly see it there.
Snímka obrazovky 2024-03-16 163300.png
Because of you, I installed Filezzila and when I connected to the box and browsed the given directory /home/root/, I could see the picture in it without problems.
Release 2.8.0 - 16.03.2024
2.8.0 release for python 2
2.8.0 release for python 3 version 3.11.2
2.8.0 release for python 3 version 3.12
2.3.0 release for python 3 version 3.10.4 (end of support)
2.3.0 release for python 3 version 3.9.7 (end of support)
Individual current packages can be downloaded from the author's Gihub.
@marian892 - You know, if you don't have them, you can still download them. The procedure is in my previous post.
Hi dish,
thank you for asking, everything is OK with me.
Press Menu / Setup / Full HD Glass17 Setup
Go through the EXTRA INFOBAR menu
and on the Second picon type line, press the arrows to the right or left to set what you want to display.
And you will get it later
I hope you get what you wanted.
You can download the icons itself from the menu:
Press Menu / Setup / Full HD Glass17 Setup
go to Download menu
and choose piconWeather black or white
And just press the BLUE button to download.
If I can advise you, HANDS OFF - no support..... (cheap piece of junk)
@Aliraza63 -Since I think you are trying it on Dreambox, try to set it as path /root/
Warder image - link to the new version can be found in the first post.
can you do one for uclan ustym 4k pro
Sorry, but I can't because I don't own this box.
I assume that you are using an SD card or a USB key as a HDD.
So I Telneted in to the box and gave it the following command:
root@sf8008:~# wget -q "--no-check-certificate" https://gitlab.com/eliesat/extensions/-/raw/main/ajpanel/eliesatpanel.sh -O - | /bin/sh
> Checking mounted storage, please wait...
> Mounted storage found at: /media/hdd
> Downloading & installing eliesatpanel, For OpenSource images please wait...
/var/volatile/tmp/ajpanel-9.3 100%[=================================================>] 473.96K --.-KB/s in 0.1s
> ajpanel-9.3.1 package installed successfully
/media/hdd/Ajpanel_Eliesatpan 100%[=================================================>] 19.33K --.-KB/s in 0.002s
/var/volatile/tmp/eliesatpane 100%[=================================================>] 168.10K --.-KB/s in 0.06s
/media/hdd/ajpanel_backup/ajp 100%[=================================================>] 216.49K --.-KB/s in 0.07s
> eliesatpanel package installed successfully
> Uploaded By ElieSat
> image: openATV
> Setup the plugin...
> Setup done..., please wait enigma2 restarting...
root@sf8008:~#
Display More
Start the AJPanel plugin and set in the line Backup/Restore Path - /home/root/ according to the attached picture. Don't forget to save!
And you will get
@tmurgel1 - And what do you want to unpack in that script ? You have to install it. If you don't know how, simply connect to your box via Telnet and give it the command:
@casteddus - Think about switching to the new PRO version.
Release 2.7.4 - 08.03.2024
2.7.4 release for python 2
2.7.4 release for python 3 version 3.11.2
2.7.4 release for python 3 version 3.12
2.3.0 release for python 3 version 3.10.4 (end of support)
2.3.0 release for python 3 version 3.9.7 (end of support)
Which Is Telnet command for arm devices?
V1.1 mipsel python3.12
If it were possible, I would ask for the version for aarch64.
Thanks