sony network asia sat 7 did not work plz do some thing
Sorry I don't have the sat ti check it :(
sony network asia sat 7 did not work plz do some thing
Sorry I don't have the sat ti check it :(
Sorry... I have upload it again
This plugin is open source to Dima73
https://github.com/Dima73/enigma2-plugin-extensions-tmbd
for Open source images
I have edit it for DreamOS images
after download it send to /tmp and givr these commands then restart enigma2
Ncam 10.7 compiled and patched READ
-[dvbapi] Always regard stream_type 0x81 as audio (ac3) without looking for the ac3_descriptor
*This fixes some not ATSC complaint channels reported with no sound.
-HD+ HD05 Card support (tnx pehedima for patch!)
-NDS DES/3DES Overcrypt support
-fix bug for wrong decoded classD3 CMD's
-improved Sky DE/CH/AT V14/V15 payload log output
[streamserver] Synced descriptor parsing code with the dvbapi
*This should fix no AC-3 audio on some PowerVu channels.
Download link
Ncam-Images-MIPS-IPK (All Mipsel devices + deb (open source images) IPK install file)
NCam-Images-OSDreambox-DEB (All ARM devices deb install file)
*************
Here are Only Bin file ..
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
(aarch64-ARM (VU+4K Duo4K + osmio4k
(build-x86-Linux-pc (32bit-i686
(build-mips (Tiviar plus and similar
(build-mipszrouter (Routers Mipsel DD-WRT
************** Bin files to support OpenSSL 1.1.1 **************
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
Ncam 10.6 compiled and patched READ
-fix card not updated if entitlements are expired
-new gbox reader parameter 'force_remm'
-dont send same successive remm twice
-Just refactoring due to investigating an issue with CAPMT parsing
-More furious refactoring since I still wasnt happy with the resulting code!
-Final refactoring step of dvbapi_get_packet_size()
-[gbx remm]allow remm request for unknown emm
-Implement changes needed as researched by t5b6_de for dvbapi client protocol V3
-Add generic hardening against empty ecm. It makes no sense to process empty ecms at all!
-Refactor handling of command packages
-Add generic command package dump to assist in debugging
-Remove the now superfluous dumps that were thrown while processing the commands
-Newcamd: Corrected brain fart commit (zero check was even already present)
-Camd35: Add protection against empty ecms
-Fix: valid section length is minimal 4
Display More
Download link
Ncam-Images-MIPS-IPK (All Mipsel devices ipk install file)
NCam-Images-OSDreambox-DEB (All ARM devices deb install file)
*************
Here are Only Bin file ..
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
(aarch64-ARM (VU+4K Duo4K + osmio4k
(build-x86-Linux-pc (32bit-i686
(build-mips (Tiviar plus and similar
(build-mipszrouter (Routers Mipsel DD-WRT
************** Bin files to support OpenSSL 1.1.1 **************
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
Yes. Of Course
Online Update ...
-V3.2
-Sorry back to old style Keyboard (Because new style not compatible with some images such as OpenATV)
CLEAR button depend on enigma2 images ..
On some image works will and on other doesn't ..
I will try you suggested ...
Thank you bro
we are using newest version of
(libcrypt.so.2.0.0)
(Glibc 2.30)
GCC 9.2.0
OpenSSL 1.1.1d
Busybox 1.31.0
https://github.com/OpenVisionE…sion-development-platform
So that method of symbolic doesn't work (Already I have test it before and I have got as I wrote before)
libcrypt.so.1: version `GLIBC_2.4' not found
So the correct way is as mentioned in my previous reply with (RDEPENDS_${PN} = "libxcrypt-compat")
https://github.com/OpenVisionE…5cde4c31b96e7a3b18719fadb
Then you can build CCcam with old libcrypt package need it ...
OpenaTV Still using libcrypt.so.1.1.0 not version 2.0.0 because CCCam compatible with libcrypt 1 not version 2
Doesn't work
root@dm920:~# /usr/bin/cccam-2.3.2
/usr/bin/cccam-2.3.2: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: No such file or directory
root@dm920:~# ln -sfn libcrypt.so.2.0.0 /usr/lib/libcrypt.so.1
root@dm920:~# /usr/bin/cccam-2.3.2
/usr/bin/cccam-2.3.2: /usr/lib/libcrypt.so.1: version `GLIBC_2.4' not found (required by /usr/bin/cccam-2.3.2)
root@dm920:~#
here we find in our core source the solution ..
It is ok ..
I have use old version of (libcrypt.so.1) and Cccam works again just fine
Thank's (audi06_19)
Any friend have cccam source ?!
I need to build new version to my new images depends on new depends files (Glibc 2.27 + libcrypto 1.1)
Or any one can find compatible file to my images ?!
Thank you
You need new ECM keys .. Not available right now
Ncam 10.5 compiled and patched READ
-[powervu] Added cw hash mode 34
-[dvbapi] SDT parsing optimizations
* The SDT filter is now stopped even if no service name or provide name is found. Previously, on FTA or BISS channels, the SDT filter would run forever.
* The SDT is now used for getting the tsid and onid of the service (in case we haven't already receive them in the CA PMT).
* Duplicate info from the log is removed to keep it clean. The SDT information is only printed once.
* Removed some redundant chekcs from the SDT parsing function. They are already done in the caller function.
* Added more service types as "tv".
* The actual string parsing and supported character sets remained the same (still some eastern character sets are not supported).
-[dvbapi] Display service name when zapping
* If present in ncam.srvid or ncam.srvid2, the service name is displayed at channel zap (like it was done before the CA PMT rewrite).
-[dvbapi] CAT filtering optimizations
* Separate CAT filter (starting and stopping) from EMM filtering.
* Stop CAT filter as soon as CAT is parsed, instead of letting it run forever. (Everytime we get a new channel, the CAT filter is restarted anyway).
* Split CAT parsing from CA descriptor parsing.
-[dvbapi] Cosmetics and minor optimizations
-[dvbapi] Added more PMT audio descriptors
Display More
Download link
Ncam-Images-MIPS-IPK (All Mipsel devices ipk install file)
NCam-Images-OSDreambox-DEB (All ARM devices deb install file)
*************
Here are Only Bin file ..
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
(aarch64-ARM (VU+4K Duo4K + osmio4k
(build-x86-Linux-pc (32bit-i686
(build-mips (Tiviar plus and similar
(build-mipszrouter (Routers Mipsel DD-WRT
************** Bin files to support OpenSSL 1.1.1 **************
(build-mips (Gigablue-Dream-VU+-Xtrend-Formuler
(build-sh4 (Golden Media-Galaxy innovations-Amiko
(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT
Update online
-Version 5.8
-Fix some color code in plugin skin
as like this issue (fixes now)
All ncam files to be possible to compile are in the first post (Until now)...
Sorry ...
I have fixes download link ....
Display MoreDisplay MoreDisplay Moreplease compile for the following platforms
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx)
thanks
If you have toolchain for those device send it I will compile it ..
Because what I have it give me error compile on my ubuntu 18.10 .. I will upgrade it to 19 and I will test to compile it again
(Routers openwrt brcm47xx) error compile
Code/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script /home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm47xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mipsel_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mipsel-openwrt-linux-uclibc/4.8.3/../../../../mipsel-openwrt-linux-uclibc/lib/crt1.o:1: syntax error collect2: error: ld returned 1 exit status make[2]: *** [Makefile:449: ncam-router-OpenWrt-brcm47xx.mips.debug] Error 1 make[1]: *** [Makefile:421: all] Error 2 make: *** [Makefile.extra:163: cross-mipsel-routerwrtbrcm47xx-linux-uclibc] Error 2
(Routers openwrt ar71xx) error compile
Code/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script /home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-ar71xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error collect2: error: ld returned 1 exit status make[2]: *** [Makefile:449: ncam-router-openwrt-ar71xx.mips.debug] Error 1 make[1]: *** [Makefile:421: all] Error 2 make: *** [Makefile.extra:207: cross-mips-routerwrtar71xx-linux-uclibc] Error 2
(Routers openwrt brcm63xx) error compile
QuoteDisplay MoreLINK ncam-router-openwrt-brcm63xx.mips.debug
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o: file format not recognized; treating as linker script
/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/bin/ld:/home/raed/NCam/cross/OpenWrt-SDK-15.05-brcm63xx-generic_gcc-4.8-linaro_uClibc-0.9.33.2.Linux-x86_64/staging_dir/toolchain-mips_mips32_gcc-4.8-linaro_uClibc-0.9.33.2/bin/../lib/gcc/mips-openwrt-linux-uclibc/4.8.3/../../../../mips-openwrt-linux-uclibc/lib/crt1.o:1: syntax error
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:449: ncam-router-openwrt-brcm63xx.mips.debug] Error 1
make[1]: *** [Makefile:421: all] Error 2
make: *** [Makefile.extra:185: cross-mips-routerwrtbrcm63xx-linux-uclibc] Error 2
my device USR Robotics 9108 brcm63xx
good working
AS I wrote in my last replay ...
On ubuntu 18.10 I can not built files to those devices (brcm47xx or ar71xx or brcm63xx)
I have got error because toolchain not work probable with ubuntu 18 ..
Whaen I have free time I will try to upgrade my ubuntu to 19 and try again to build files to almost platform devices.