i sold my card as i couldn't find any solution
Posts by triscross
-
-
Hi
I am not sure you are correct there
Have you tried?
Thanks
is it possible i dont want to throw this card in the :(
think i will ask before buying another card lol
-
not looking good i have got my dm500 up and working installed blackship oscam but showing no entitlements :(
-
i have ubuntu server with oscam and iam trying to get my new s*ylink card to work the oscam message iam getting is
You have a bad Cam Key set
link [internal] card system not supported
link [internal] card initializing error
from what ive read i need to use oscam black ship version but it wont work on ubuntu server :(
so far the way i see it is i have 2 options throw the card in the bin and hide the receipt from the other half or use by dm500 to read the card and share to the server
ive bricked my dm500 flashing images so need to find a pc with a serial port to do the flash erase grrrrr
do i have any options ?? -
i have just looked at cs studio and noticed that i have something out of date
card reader /dev/ttyS0
handled 655(485) ecms and 0(0) emms
Viaccess card
Caid 500
Cardserial *******
ident fff920 - c02ca2
ident 42400 - c02ca2
ident 42410 - c02ca2
valid from 29-10-2012 untill 29-4-2013
valid from 29-10-2012 untill 29-4-2013
valid from 29-10-2012 untill 29-4-2013
valid from 29-10-2012 untill 4-11-2012i assume this is ident 42410 that is out but what dose this mean or what package is it
this is a new card that had been activated but i think something's wrongplease help not sure what to do could it have been blocked or something
-
last night i made a real mess of my dm800 i received the no ca error and had to dreamup a image i used a Sim 2.01 SSL76 Image "OoZooN"
after doing some reading i had a look and i have a sim210 in the box am i correct in thinking that any sim2 images can be loaded on to my box and that the ssl is on the image that's been flashed so any will workthis all started with the pi image that was installed i couldnt change the network settings so i installed a new image and had tune failed after every reboot this time i would like to start with the correct image in flash then install others onto usb
Any advice would be greatly appreciated :)
-
i have bided on a dm 800 hd the mrs likes the idea of having a good epg and i got rid of the dvd recorder when i was using the dm 7020 so i will pop in a 320 hdd :)
hmmm hope it dosnt overheat -
not had a goog weekend guys been in hospital and get out to find my openbox has bit the dust so back to my old dm500 ,i forgot how sd looked :( so its time for a new box ive looked at dm 800 clones but how are the technomate hd boxes my old tm 1000 was a good solid box
dont want another openboxrealy needs to be cheep but tbh i just want a stable box
-
i got the psu today after ordering the wrong one off ebay DOH and had it boot up on my tv :) i have friends round this weekend but i will start monday
i must say iam impressed with it but time will tell -
just got the email that its been delivered tomorrow, now should i use it as a server and post my findings :dribble:
what do you all think
-
nabilo for me i wouldnt say 100% stable but its what i found the most stable and stayed on my box the longest
-
i have the s10 and the s11. i think the only difference is the s11 has component connection tbh both of my boxes are a little buggy but there a cheep box
-
its like a mind game it drives you nuts because you cant do it but it just makes you want to get it right so much more
grrrrrrrrrr -
i tried changing cccam ive had a good look at my shares and stopped sharing with a few "sorry" that still made no difference so i pulled out my ubuntu pc that i was using before i started with debian and cccam has been stable
could the pc i was using just have been incomparable with linux it seemed ok when i first installed it
but the system its self seemed stable but then again i couldnt get oscam stable and blamed it on oscam
ive lost a few good peers with this i sopose the lesson is that new hardware isnt always better -
is changing the cccam version as Simple as ftping the x86 file over to emu folder ??? if so what version is most stable apart from 2.3.0
-
sorry this is before buddy
15:27:22.907 CCcam: remote ecm -> ********************** 0x963(0x000)
15:27:23.165 CCcam: remote ecm <- *********************** (took 0.257 seconds)
15:27:23.165 CCcam: remote ecm -> ************************ 0x963(0x000)
15:27:23.165 CCcam: client ********* ecm request for handler 0x12f 0x963(0x0) sid 0x232b ok: 1 (took 0.257 seconds)
15:27:23.235 CCcam: remote ecm <- *********************** ok (took 0.070 seconds)
15:27:23.235 CCcam: client ******** ecm request for handler 0x12f 0x963(0x0) sid 0xf25 ok: 1 (took 0.163 seconds)
15:27:24.697 CCcam: remote ecm -15:32:35.589 CCcam: ======================================================================
15:32:35.589 CCcam: starting CCcam 2.3.0 compiled on Dec 16 2011@15:45:16
15:32:35.589 CCcam: ======================================================================
15:32:35.615 CCcam: online using nodeId 8fb3dc798130988b -
it just stopped again no errors in the log after i rebooted i get this in the log
15:32:35.589 CCcam: ======================================================================
15:32:35.615 CCcam: online using nodeId 8fb3dc798130988b
15:32:35.638 CCcam: create 1 cam device(s)
15:32:35.816 CCcam: /dev/ttyS0 configured clock frequency: 6000000 Hz
15:32:35.816 CCcam: calculated EGT: 0 us
15:32:35.826 CCcam: viaccess card found
15:32:37.494 CCcam: card added to broker with caid 500
15:32:37.512 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
15:32:37.512 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
15:32:37.512 CCcam: static cw not found or bad
15:32:37.512 CCcam: parsed 0 entries from /var/etc/CCcam.prio
15:32:37.512 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
15:32:37.512 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
15:32:37.512 CCcam: server started on port xxxxxare any of these anything to worry about
-
i thought this was a oscam problem but i have now reinstalled debian following the Sticky: Automated CCcam 2.3.0 debian and cccam still crashes the system is still there and still connected to the internet vieving the /emu/log/debug its just stopped dead
in the moorning i get up and check the log and i see lots of allready connected errors from my peers and card reader errors cannot view cccam info webpage ,reboot the server and it goes ok for about half a day
i also seem to be able to freeze up cccam info if i view the servers tab and keep refreshing it then cccam stops after about half a hour
things ive tried
logging everything
new card reader
disconnecting the card reader
checking that i dont have cccam running twice
minimum cccam cfg
reinstalling lots of times
new router
disabling everything in bios Bluetooth ecti would like to know if there is any other things i can do
how can i tell if cccam has stopped ?i need some ideas please
-
i received my new reader and reinstalled debian with the correct drivers "thanks toonshare" but still had problems oscam crashing cccam restarting at the same time so i have now installed Ten Below recommended version of oscam and musogeek's services
it's all looking stable :feel_good: -
while you had it running did you notice any improvement