Posts by seagen

  • Remote Stream Channel Converter

    Nope no IPTV support because almost all providers allows 1 connection only

    If i added IPTV support people could get banned from the provider ;)


    And IPTV you can add direct on the box so you get no conflict.

    Comming up soon the marveless JediMakerXtream by KiddaC plugin for all OE 2.5 and OE 2.6 boxes

    then you can create IPTV bouquets as easy as you do with this plugin for Sat/Cable and Terrestial.



    But nice you like it :)

  • Remote Stream Channel Converter

    Here is the well known plugin Remote Stream Channel Converter now ported for Dreambox

    Works on all DreamOS OE 2.5/2.6


    This is a nice plugin since your DM One UHD dont have a common interface.

    If you allredy have an older box in your house with a CI+ module setup and use a legal card and subscription

    you can now use that box with this plugin to also see those channels and of cause all others if you want on your DM One UHD


    So download and install the plugin

    then reboot your gui

    go to Menu >> Setup

    Here you now find RemoteStreamChannelConverter.



    298118c9738.png


    Open Plugin and add the IP Address to your remote Box by pressing Yellow Button



    c6ba1f97e452e5.png


    Now enter IP Address, Username and if your box requeres also password

    Everything you can leave to default

    then press Green Button to download bouquets for selections



    34fc4c.png


    Now just mark the Bouquet or bouquets you want to download from remote box

    And press GreenButton to start downloading.

    After all is done you find your new remote boquets in the bottom of your Favorit list

    by open Channel select screen and pressing Blue Button.


    You can only download Bouquets with Sat/Cable or terrestial channels

    I have not put in any support for IPTV Channels and will not do it.


    317179000fe91bb186cf.png

  • PowerVU config files for oscam-emu

    Quote from Mangazes

    I have vu + zero the oscam settings are fine, the channels do not come in the same box, some error, the image I use and open black hole, I ask for help

    Need some more info to be able to help you.


    What Oscam do you use? Regular or Emu


    How did you install? With IPK installer or manual installation

  • Poor signal 4.8E

    Have you checked your tilt of the 4.8 LNB (Skew)


    Depending on where in the world you live you also need to set the Skew right

    special when using multiLnb Dish


    About 2.5-3 degrees tilt Skew is needed

    LNB Skew ("turn clockwise standing behind the dish")


    https://www.dishpointer.com/

  • HOW TO SHOW ONLY LOCAL CARD

    Its the other way around Cccam is almost impossible to filter.


    I think that only reason people is using Cccam is because its easy to setup

    With Newcamd you have to setup 1 port for 1 caid


    example portconfig


    portnumber@caid:ident


    so for a Conax card this would look like this if we use port 34000


    34000@0B00:000000


    For multiple cards/CAID just add another port and give client another N line to that port


    Example multiple card Newcamd


    34000@0B00:00000;34001@0500:043800



    and the n line in cccam client would look like this


    N: <ip adress to oscam server> <port> <username> <password> 01 02 03 04 05 06 07 08 09 10 11 12 13 14


    Hope this explains better to you and just ask away if you need more info

  • HOW TO SHOW ONLY LOCAL CARD

    If assign diffrent groups to your shares like local card is group 1 and remote card is group 2

    then do the same with users. Assigning them to group 1 will give them access to local card only

    since they are not member of group 2.


    If you want to add 1 user to both group then edit user and assign group number with comma ex: 1,2

    then that user will have access to all readers (Shares)

  • Disable Mgcamd DVBAPI

    Well ten we can forget about oscam.


    But have you fiddle with the mg_cfg and try to set i guess you probably been there done that also ;)

    Just trying to jugg your memory back to life


    # AU

    # 00 disable, no emm pids processed

    # 01 enable, emm pids always processed for soft-au and shared cards

    # 02 auto, emm started only if channel cant be decoded

    # 03 process emm pids for network cards update only

    A: { 01 }


    # network mode, use summ for several clients

    # 00 no network (default)

    # 01 newcamd netclient

    # 02 radegast netclient

    # 04 camd3 netclient

    # 08 gbox netclient

    G: { 01 }

  • Disable Mgcamd DVBAPI

    Yes over the years i have lost some and gain some and when the brian grows old and the wife have nagged alot

    the stupid brain starts to filter :chuckle::chuckle:


    But for fun have you try this config


    [reader]

    label = server

    protocol = newcamd

    device = xxxx.xxxx.net,27263:27299

    user = user

    password = pass

    key = 0102030405060708091011121314

    group = what ever group you prefer

  • Disable Mgcamd DVBAPI

    Well if you on a Cardserver with 36 cards then of cause it would be very impractical ;)

    But if you setup the Newcamd side of the server and set MgCamd Client to =1

    then you can share multiple caid for one port only to clients


    Sorry i am lost as you must be my old brain have not used MgCamd for a longtime :derpthink:

  • Disable Mgcamd DVBAPI

    I dont now why you want to have both MgCamd and Oscam on same Box

    Nowdays you can do all from Oscam


    Just go to Oscam WebIf then Readers there add Newcamd reader


    In device use: ipadress,port and in the bottom of the settings page fill in username/password + key


    If you want to split who can use what card just assign diffrent group numbers to your readers and then assign group to users

  • EkselanceCN Skin

    This skin want work proper on Blackhole Image.


    Skin will probably install but you want be able tou use it and sevral important screens are missing

    So ATV Image only :thumbup:


    Nice skin :)