How to flash online AX HD61 latest image using Multiboot Recovery menu into either of the Four Multiboot partitions

The AX HD61 can download and flash a team image online through its Multiboot recovery menu — no USB stick required.

Note: your AX HD61 must have a hard-wired network connection.

Flashing online

1. Power on the AX HD61 and, as soon as you do, hold down the OK or STANDBY button on the remote. Release it once rCUY appears on the front display.
2. Once you're in the Multiboot recovery menu, select Bootmenu at the bottom and press OK.
3. Select Flash online image and press OK.
4. Choose a team image to flash — currently OpenATV 6.3 & 6.4, OpenHDF 6.4 & 6.5, OpenNFR 6.3 & 6.4 and OpenViX 5.x. Press OK; a download progress screen appears.
5. Once downloaded, you'll see the four image slots. Choose the slot to flash to and press OK.
6. When complete, select which image you'd like to boot into and press OK.
7. To boot a different slot later, use the receiver's built-in Multiboot system, or press Menu → Standby/Restart → Restart and, as soon as the screen goes blank, hold down the top-left power button until the Multiboot recovery menu appears, then choose your image.

That's it — very simple, and no USB sticks required.

⚠️ Choose your slot carefully. Flashing to a slot reflashes it — you'll lose everything you've set up in that slot. Note which slot you currently boot from before you choose.