Sorry, don't know where to post this.
Issue.
I'm running Ubuntu Server 15.10 and have 2 DVBSky S960 connected. I have built the dvb drivers on the computer. When rebooting the computer tvheadend having issues mapping each tuner to same id, so because I'm using 2 different satellites so the channels doesn't work. To make it work I have to disconnect the USB DVBSky and connect them one by one in the right order.
I understand that by having MAC address or serial for each device, you can configure Linux to always use the same usb port id and then the issue should be solved.
However when looking after the MAC and serial it looks like both devices has the same. Any suggestions on what to do?
Code
kidkic@TvHeadEnd:~$ dmesg | grep -i dvb
[ 33.588013] usb 2-3: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[ 33.588165] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 33.588178] DVB: registering new adapter (DVBSky S960/S860)
[ 33.589492] usb 2-3: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
[ 33.680487] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[ 34.708990] usb 2-3: DVB: registering adapter 0 frontend 0 (Montage DS3103/TS2022)...
[ 34.732009] Registered IR keymap rc-dvbsky
[ 34.732113] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0/input15
[ 34.732167] rc0: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0
[ 34.732170] usb 2-3: dvb_usb_v2: schedule remote query interval to 300 msecs
[ 34.732172] usb 2-3: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[ 34.732190] usbcore: registered new interface driver dvb_usb_dvbsky
[ 34.852028] usb 2-3: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[ 46.712265] usb 2-2: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
[ 46.712384] usb 2-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 46.712401] DVB: registering new adapter (DVBSky S960/S860)
[ 46.713716] usb 2-2: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
[ 46.780567] m88ds3103_load_firmware: Waiting for firmware upload (dvb-fe-ds3103.fw)...
[ 47.806843] usb 2-2: DVB: registering adapter 1 frontend 0 (Montage DS3103/TS2022)...
[ 47.806902] Registered IR keymap rc-dvbsky
[ 47.807001] input: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1/input16
[ 47.807103] rc1: DVBSky S960/S860 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc1
[ 47.807106] usb 2-2: dvb_usb_v2: schedule remote query interval to 300 msecs
[ 47.807108] usb 2-2: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
[ 47.876133] usb 2-2: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000)
Display More